Use scan functionality by simple app that starts LE scan
and in a while stops it.
It uses basic HCI scan interface prepared for
supporting LE central role feature.
Change-Id: Idcde4c742290d46931ab86522e51b0fc547a2d42
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The codestyle is to use lower case for hexadecimal values.
Change-Id: I0e73cdf6d8ff4b48e6cb814f705193c65a01d14a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This changes order of Write Command definitions so it is consistent with
the opcode value.
Change-Id: Ie0eaaaec75d7b17d2da62a6c930ec56d1e666253
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The code should always warn about unkown PDUs since it could be causing
unexpected behavior or that something is missing.
Change-Id: Idc608ca221c5ff6e440f90fa24c2cd6a3e6437fc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Even one-line loops & branches should have braces.
Change-Id: Ie82e4dce1b7a2c9181f631b20d6532f1866c1197
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Unknown SMP PDUs may be a bad thing so upgrade the respective log from
debug to a warning.
Change-Id: I05072dcbedb071ff968dd9ddfb075770110b5853
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are valid cases where we wont have handlers for unknown L2CAP
PDUS. Therefore, convert these logs from error to warnings.
Change-Id: I309b8074f9ef883ce981a4a2fbc6ab8421fda62a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The unhandled opcodes and events are not really errors since we don't
need general handlers for everything. For events its good to have a
warning but for completed commands the cmd_send_sync() API means we
don't need generic handlers for everything.
Change-Id: Ie580189f3e6d69ef10d10e6c6080d5e983c08e8e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add missing newline character to debug log.
Change-Id: Ic78ae2587d8f48b1af9754f1484350e94039f6f7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We want to be able to do fine-grained enabling of debug logs for the
various Bluetooth sub-modules. They all default to 'n' so an app
writer would need to go and enable the specific ones that they're
interested in.
Change-Id: I17105adf133d441dfc811bdd66a00be015813679
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move UART debug config option after UART driver configuration and make
it depends on it.
Change-Id: I23dc8a4a43aa6dee0bb5266cd1f84a00e811db1d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Set the toolchain in case the user doesn't have it set in their
environment.
Change-Id: Ia961598bc125ded9326747cc8c5810635a8481d5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This replaces _1 and _2 with the respective UUID size they carry.
Change-Id: I254afe335121aef23ed49a5fe0c49520937cc14f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the remaining ATT PDU definitions.
Change-Id: Id58116e00ba0d3a0ea4b0f94bd262290342e7e9f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Execute Write PDUs along with initial code to
parse them.
Change-Id: Ifa8229b9f3bf0a60d9abe553263b32397d1ba881
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Prepare Write PDUs along with initial code to
parse them.
Change-Id: Ia7210dbe4662afbebe742b5b1a7b8f08999adf2a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Signed Write Command along with initial code
to parse it.
Change-Id: I2071163c8468a6580d9a9305095187a140c80a43
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Write Command along with initial code to parse
it.
Change-Id: Ifabcfa8efb54b5135a540718fb60d9a656cd088c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Write PDUs along with initial code to parse
them.
Change-Id: I69d2002b3e6da80037c058f42f543a0ab4765958
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Read by Group Type PDUs along with initial
code to parse them:
> ACL Data RX: Handle 3585 flags 0x02 dlen 11
ATT: Read By Group Type Request (0x10) len 6
Handle range: 0x0001-0xffff
Attribute group type: Primary Service (0x2800)
< ACL Data TX: Handle 3585 flags 0x00 dlen 9
ATT: Error Response (0x01) len 4
Read By Group Type Request (0x10)
Handle: 0x0001
Error: Attribute Not Found (0x0a)
Change-Id: Iebc84e7a9c405fa58b7984602d2d27f79d6033a7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Read Multiple PDUs along with initial code to
parse them.
Change-Id: I34f597881e3bdb9325ffbf2bda42b7ae6710c3ae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Read Blob PDUs along with initial code to
parse them.
Change-Id: I5a2a2e2e32bf44d98ce928b3d57ad7f05059a927
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Read PDUs along with initial code to parse
them.
Change-Id: I3ec54a0bf2394b54bd8b08957533f0826bf4a23a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Read by Type Value PDUs along with initial
code to parse them:
> ACL Data RX: Handle 3585 flags 0x02 dlen 11
ATT: Read By Type Request (0x08) len 6
Handle range: 0x0001-0xffff
Attribute type: Characteristic (0x2803)
< ACL Data TX: Handle 3585 flags 0x00 dlen 9
ATT: Error Response (0x01) len 4
Read By Type Request (0x08)
Handle: 0x0001
Error: Attribute Not Found (0x0a)
Change-Id: I0b4371b8decebf33710a949552a11c80c544b5f8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Now that we no-longer need to set an upper limit of outgoing ACL
buffers (thanks to reintroducing the ACL semaphore) we don't need to
perform a second initialization of the buffers.
Change-Id: Ie59bf7cb0e6915f1c67ca3dfb03244f9b4af94d5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This reverts commit ce981a0f51f94a3f23c43b947a2ce62a1ef08623.
Now that we're back to using an ACL buffer semaphore the rotation of
outgoing ACL packets via a pending queue is no-longer necessary.
Change-Id: I0da42992bed2abba1544b1a82c31bc71342ecf70
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since nano_sema is after all able to handle multiple waiters we can
have a cleaner and more efficient implementation by using a single
semaphore for all of the connection tx fibers.
Change-Id: Iafb595ae556a2dd826502cf282b88548cb34f336
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds the defines for Find Information by Type Value PDUs along
with initial code to parse them.
Change-Id: I9eaf2df390ca6f78530df7f1ae606b588d1fcb2e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Find Information PDUs along with initial code
to parse them.
Change-Id: If34533cca4a1a554ca3f119c7639a1167dae0ff2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The function bt_hci_cmd_send_sync() would be used in LE SMP code for
using HCI controller for encryption.
Change-Id: I0f8f7963a0bf0597b59f24e6d21b6d1f49072f43
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add handling of SMP Pairing Request for Pairing Feature Exchange. In
the beginning support Just Works pairing method.
Change-Id: I8aab10683e9f26db4e0e9cb1bb9a8dc8940f0ab0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Instead of magic number use sizeof().
Change-Id: I6c9db3d7a371312d0aab4fd7dc6a9d0c92449afc
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enabling HCI_CORE debug helps to identify possible bugs.
Change-Id: I13df39d63ee9b15f83503d86edc71733c7db94d5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Allowing to redefine QEMU_EXTRA_FLAGS helps to overcome user channel
stuck cases, you still have the possibility to use bluetooth over tcp
by specifying QEMU_EXTRA_FLAGS="-serial tcp:...". Default behavior
remains the same though.
Change-Id: I3a8190a1ca04029e788bfd424f3b3a3be9f2af75
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
For debugging buffer access related issues it's convenient to be able
to enable logs and extra checks specifically for the buffer related
code.
Change-Id: Ibb87d344809d2bcada10a22b16a23e6556f4ae79
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Bluetooth regression and system regression would run compile test
for shell app.
Change-Id: I029772483e7aa9ac0717db760d8de1f6be3371b5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support for nanokernel build for shell application.
Change-Id: Idf5f3673050c2ac4c941dc9164536fc487e9216b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove old way of starting qemu target and add extra information.
Change-Id: I37c378aa0eb873b3fc16362991eec8a6b661626b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add bt_smp_create_pdu() helper and implement send_err_rsp for an
unknown SMP command.
Change-Id: Iaed0811f3323f62aaa56eb531fb383cf15396ef8
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support for Security Manager Protocol fixed channel. SMP handling
would be done in smp.c.
Change-Id: I26d3d098c6b1c3d03aad958d83dfee09e03add1d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Bluetooth shell sample application make use of serial console shell
and register Bluetooth commands to it. It shows example how console
shell might be used.
Change-Id: I98340422b90e85dc7a2c44823536121999a08952
Co-authored-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Make serial console interface more robust. Enables interrupts only
when registering input, all memory is managed inside application.
Interface to application is changed to have two fifo queues. One
queue is a free line slots and another queue is keeping entered
lines. This way memory for lines is managed inside application which
provides free lines queue. It is also simpler to manage entered
lines by sleeping on fifo_get on app layer.
Change-Id: I4776c03eddd1e7d880df3b902bd48f5f2c901cad
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
There's no need to have custom minimum value evaluation logic when
there's already a convenience macro available.
Change-Id: I91ad50521deb2575100c3480cad516bbf6f4dc2d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix bug printing ATT code in bt_att_recv()
Change-Id: I21fe9cb1272428e618412e98b09e8d786132eef6
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Arkadiusz Lichwa