Fails sporadically on this platform and causing CI blockage.
Filed bug #12478. Should be reverted once bug is fixed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
OpenThread commissioner feature has extra stack requirements, hence
increase it in this configuration.
Fixes#12455
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
We have a new power management system and those samples have been
written for specific boards and using the application based power
management subsystem. We are getting new tests/samples that are generic
with the new subsystem, so remove those in favor of the new ones.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use built-in by default. We do not use external library of QMSI anymore
and rely on integrated HAL. Remove this option and simplify HAL
configuration.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds an fxos8700 device tree node to the mimxrt1050_evk. The sensor
interrupt gpios require a board modification to be used and conflict
with Ethernet and LCD signals, therefore their pinmuxes are not
configured.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables the mcux lpi2c shim driver and pin muxes on the mimxrt1050_evk
board. Updates the board documentation and yaml supported list
accordingly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables the mcux lpi2c shim driver and clocks on all imx rt socs when
the i2c driver interface is enabled.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a shim layer around the mcux lpi2c driver to adapt it to the zephyr
i2c interface. This shim driver leverages heavily from the mcux i2c shim
driver because the MCUXpresso SDK provides similar APIs for the i2c and
lpi2c peripherals.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The z_set_timeout_expiry() function was added in part to simply the
locking strategy, but it missed a case where a function it was calling
was re-locking the same spinlock. It "works"[1] in uniprocessor
environments, but can be a deadlock in SMP.
Fix this by moving the meat of the function to an unlocked utility,
use that locally, and turn the entry point into one that does locking.
Actually this only gets called from idle now, which is a use case that
will go away when TICKLESS_IDLE is removed as a separate feature (once
you know all timeouts are set tickless, you don't need to set it from
the idle entry at all).
Discovered via lucky inspection.
[1] It doesn't work. It releases the lock prematurely at the end of
the inner block. But in practice this wasn't discovered.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The SimpleLink wifi driver enables the Fast Connect method of
WiFi provisioning, which allows the network coprocessor to
reconnect to a previously connected Access Point (AP) on
startup.
Previously, if Fast Connect failed to connect, any network
socket applications would inevitably fail, as there would have
been no wifi connection.
This patch adds a configurable timeout for the Fast Connect
feature, after which timeout, an error is logged informing
the user to manually reconnect to an AP.
Reconnection is typically accomplished by separately running the
wifi sample shell program.
Fixes: #11889
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The Intel S1000 board has a SPI flash that isn't directly MMIO
addressable. For this case we shouldn't generate CONFIG_FLASH_SIZE or
CONFIG_FLASH_BASE_ADDRESS.
We use the heuristic of assuming if the flash node #size-cells is 0, its
a SPI flash. Than if the parent node (SPI controller) has only a single
reg element we assume its a non-MMIO addressable SPI flash. If there is
more than one reg element we assume the last reg element is the MMIO
address region for access to the flash.
Fixes#12530
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
While trying to catch crashes after test completes, do not keep
extending the timeout which might lead to and endless loop and not
getting out based on set timeout.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Commit aad21ecb31 introduced an incorrect
pattern of handling ADC sampling requests with invalid parameters in
both nRF ADC drivers. After discarding such request, the drivers do not
release properly the access lock and therefore become unusable.
Unfortunately, this pattern were later on copied in all other ADC
drivers in the source tree.
This commit adds the proper lock releasing in all the affected drivers.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit adds a test case checking if ADC drivers can work properly
after discarding an invalid sampling request.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Apart from normal customizations of vendor specific parameters in ADC
configuration used in the test, a few more changes in test cases were
also introduced in commit 1bfa34f4fb.
This resulted in some parts of ADC API (like zero interval between
consecutive samplings) not being tested at all. This commit restores
the original behavior of the test cases (with added comments that
zero intervals are intentional).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Currently only nRF drivers need assignments of analog inputs to ADC
channels (ADC_CONFIGURABLE_INPUTS Kconfig option is activated only for
these drivers). Hence, there is no need to define ADC_xxx_CHANNEL_INPUT
labels for any other ADC driver as they will be ignored anyway.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Due to a copy-paste mistake, this driver used an incorrect module
name (adc_mcux_adc16) in log messages.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
These were being truncated to 32-bits, and only 8
hex digits were supported.
An extraneous printk() at the beginning of the test
which was not being tested in any way has been removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
1. Update shell documentation according to proposals in
PR #12437 (Extend shell meta keys).
2. Fix lines exceeding 80 characters limit.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The schematic shows that both INT1 & INT2 from the MMA8652FC are wired
up, update the dts to reflect this.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change driver to get I2C address of sensor from the device tree like
most other sensor drivers that utilize device tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This sample is linking the 'app' with 'subsys__bluetooth', which will
add zephyr/subsys/bluetooth to the include path of the app. But this
is unnecessary as the app already has this path on it's include path.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
in the _rirq_return_from_coop, a fake irq stack frame is created.
But the value of lp_start, lp_end, lp_count are not set correctly.
When rtie is executed, the zero-overhead loop will be enabled, if
the pc crosses the value of lp_end and lp_count is not zero. The pc
will jump to lp_start. This will break down the system.
This commit fixs this bug and set the correct value of lp_start, lp_end
and lp_count(only need to set lp_count).
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
15.4 MHR is no longer set in net_buf pointed by net_pkt, but in a
separate net_buf, hence we need to check that net_buf now to
determine if we need to wait for ACK or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Two issues identified with 6lo fragmentation for ieee802154 that broke
the communication:
1) ieee802154_fragment_is_needed function did not take 15.4 FCS size
into account, hence taking wrong decision in some cases.
2) set_up_frag_hdr was writing with wrong offset, which resulted in 6lo
bytes being overwritten by 15.4 header.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This adds write-without-response-cb command which can be used to
confirm the transmission of the PDU using bt_gatt_write_without_rsp_cb.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_gatt_write_response_cb works similarly to
bt_gatt_notify_cb which can take a callback to be called when the PDU
is considered transmitted over the air.
Note: This can also be used to disable the ATT flow control which would
blocks sending multiple commands without wainting their transmissions.
Fixes#11558
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Legacy shell removed in order to avoid maintaining two shells
systems.
All examples and tests have been migrated to the new shell.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Peter A. Bigot