According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
After run Sanitycheck script I found out that some test cases
have the same test case name in the test result .xml file.
To get rid of it, I decided to change test cases names
for the kernel tests.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This commit adds sample code for bus state checking.
Printing the counter state is moved to own thread because the
ISR was blocking too long (messages were lost)
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit extends the CAN API with the following functions:
- can_get_state
- can_recover
- can_register_state_change_isr
This functions can be used to get the error-counters and the state
of the CAN controller. The recover function can be used to recover
from bus-off state when automatic recovery is disabled.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Should be within the 'if BOARD_NATIVE_POSIX`, or USB_NATIVE_POSIX will
get enabled whenever USB is (unless a user value overrides it).
Probably didn't cause any problems, since
boards/posix/native_posix/Kconfig.defconfig is only included for this
board.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Some test cases have the same test case name.
To get rid of it, I decided to change test cases names
contained same names.
Please check my logic, how I give them names.
Usually trying to give name same as a directory folder.
There are still more test cases which necessary to change,
but I will make changes by small steps.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Test case arch.interrupt have same test case name
for different architectures. To get rid of it,
I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The k_thread_state_str is a new function added into
kernel/thread.c recently which was used to return
the human friendly thread state, so it hasn't been
called by other existing code.
In order to improve the function code coverage, we
just replace the "th->base.thread_state & _THREAD_PENDING"
code by using k_thread_state_str function in
tests/kernel/sched/preempt/src/main.c, because
k_thread_state_str function is realized by judging
the thread_state member to return the thread state.
Signed-off-by: peng1 chen <peng1.chen@intel.com>
Some of this information is stale and needs to be fixed.
Try to make a few other things clearer while we're here.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Flash page layout API was omitted by documentation as it
is optional.
Added tag which turn it on to doxygen setup which allows
to include missing API documentation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Configure the pin connected to edge LED as PWM output.
On the new board version 1507.3 this pin also controls a buzzer.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Charles Youse (@gnuless) has left the organization. I will be
taking over most of his areas of ownership, with Daniel minding
the DW I2C driver.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
save_reports should be one of the last tasks executed because it
closes the log file. Withouth it, other functions that use debug
functions like info and error will try to write into a close file.
This fixes the following problem:
sanitycheck -x=USE_CCACHE=0 -p native_posix -T samples/hello_world/ -b
-N --log-file sanity.log
JOBS: 8
Building initial testcase list...
1 test configurations selected, 0 configurations discarded due to filters.
Adding tasks to the queue...
total complete: 1/ 1 100% skipped: 0, failed: 0
1 of 1 tests passed (100.00%), 0 failed, 0 skipped with 0 warnings in
2.91 seconds
Traceback (most recent call last):
File "./zephyr/scripts/sanitycheck", line 3866, in <module>
main()
File "./zephyr/scripts/sanitycheck", line 3854, in main
suite.summary(options.disable_unrecognized_section_test)
File "./zephyr/scripts/sanitycheck", line 2306, in summary
self.duration))
File "./zephyr/scripts/sanitycheck", line 432, in info
log_file.write(what + "\n")
ValueError: I/O operation on closed file.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Now that everything is DT based for I2C drivers we can rename the
CONFIG_I2C_[0..5]_NAME define to DT_I2C_[0..5]_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that all I2C drivers utilize DTS we can select HAS_DTS_I2C in a
common place and don't need to do it per driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move to using DT define instead of a Kconfig param, also remove unused
I2C Kconfig params for this test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When DT sources change CMake must be run again. CMake is currently
detecting changes to DT source files that we manually specify, but not
sources that are included through use of the preprocessor.
This patch makes the preprocessor output the includes used and adds
them to the 'CMAKE_CONFIGURE_DEPENDS' property.
This fixes#16791.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Added a function that can parse the dependency information given when
invoking gcc with the argument '-M'. This could be used to manually
add dependencies detected when preprocessing a file.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This commit adds an macro to allow UUID 128
to be written in more user-friendly form.
UUID in 128 bit form requires an array creation.
To complicate the whole thing - it requires the array to start from LSB,
so using the readable form, we have to write it down backwards.
Old way to declare example UUID 6E400001-B5A3-F393-E0A9-E50E24DCCA9E:
0x9E, 0xCA, 0xDC, 0x24, 0x0E, 0xE5, 0xA9, 0xE0,
0x93, 0xF3, 0xA3, 0xB5, 0x01, 0x00, 0x40, 0x6E
A form provided by this commit:
BT_UUID_128_ENCODE(0x6E400001, 0xB5A3, 0xF393, 0xE0A9, 0xE50E24DCCA9E)
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Update board dts files to add User LED and Button support. Also update
the board yaml file to say the boards support gpio.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add binding for arm,mps2-fpgaio-gpio and update device tree and change
FPGA GPIO init code to utilize device tree defines.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Configures the default instance of the sdhc driver for the
mimxrt1050_evk board so applications don't have to configure it
explicitly. Similarly, enables the gpio instance required by the sdhc
driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Configures the default sdhc driver for the imx rt soc series so
applications don't have to configure it explicitly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Configures the default sdhc disk volume name to "SD" when fatfs is
enabled. This prevents applications from having to configure it
explicitly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Recent changes to architecture headers did not address ztest headers due
to this bug in sanitycheck. Fixing them now.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test seems a little confused.
Adjust the calibration to allow 110ms sleeps to avoid error
during automated testing.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Using exact versions for our PyPI dependencies (i.e. requirements.txt
lines that look like "dependency==X.Y.Z") is rude since we're asking
users to install these dependencies outside of any virtual
environment. This causes conflicts with other packages which may
depend on the same things as us.
Use inclusive ordered comparison (>=) release specifiers instead:
https://www.python.org/dev/peps/pep-0440/#inclusive-ordered-comparison
If this causes problems for individual packages, we can refine them
using compatible release specifiers (~=):
https://www.python.org/dev/peps/pep-0440/#compatible-release
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The Zephyr fs readdir abstraction returns OK with a zero-length file
name when the last directory entry has been found. The loop to build
multiple entries instead checked for a non-file entry type.
Correct the loop exit condition.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The FatFs f_readdir function returns OK with a zero-length file name
when the last directory entry has been found. The Zephyr wrapper
unconditionally accessed fields that are left uninitialized in that
situation, propagating garbage values to the caller.
Avoid referencing uninitialized fields of the output structure in this
case.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Unused since commit 7d2e59813f ("subsys: fs/nvs: Rewrite for improved
robustness").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This adds a multithreaded dumb HTTP server sample application similar
to dumb_http_server with following differences
* support both IPv4 and IPv6 simultaneously
* support multiple incoming connections
* support TLS connections
* ignore POSIX compatibility
This app can be used for testing. Note that the app will always
serve a same static HTML page to caller regardless of HTTP request
parameters.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Links to doxygen-generated API content are displayed as monospaced code
spans in the text, but have no indication that they're are clickable
links. Tweak the CSS to color the monospaced text the same as regular
links in the text (blue) and after visited (purple). This might also
help us notice doxygen API references that aren't creating links (and
should).
Fixes: #20032
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This test case is has a tolerance of 1ms, but systems with a tick slower
than 1000 ticks/sec may spil outside the 1ms tolerance.
Tolerance adapts to system's ticks/sec, e.g. QEMU targets have
100ticks/sec -> tolerance is 10ms.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Maksim Masalski