net_if_ipv6_calc_reachable_time() requires sys_rand32_get().
Enable the test random number generator so the build doesn't
fail.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Inside void main(void) result of function sensor_trigger_set() is not
checked which might result that function can't set sensor type
and that error can't be handled.
Coverity-CID: 186196
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
Move SERCOM peripherals to use the raw defines generated from DTS
parsing. This adds aliases to the DTS so that the SERCOM number
can still be used for clocking and pinmux.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
Increase the resolution of advertising random delay from
1 ms unit to 1 ticker unit.
Relates to #10289, #10391, and #10398.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
According to the Apple iBeacon spec chapter "2.1 Advertising Packet",
"beacons must use a non connectable undirected Advertising PDU,
ADV_NONCONN_IND". Refer to https://developer.apple.com/ibeacon/
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
Added prompt to BT_CTLR_RX_PRIO_STACK_SIZE, allowing vendor specific
configuration of high priority Rx thread stack size for
!SOC_COMPATIBLE_NRF.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix XTAL advanced feature by adding the missing
implementation to calculate and, retain or release the XTAL
clock source after a Bluetooth state or role is stopped.
Fixes#15817.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to toggle GPIO Debug pins on HFCLK
request and release by the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement a lower ISR latency ULL processing design. Instead
of looping use ISR/mayfly tail-chaining to process
successive ULL messages.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implemented ULL to yield from processing in an infinite loop
if current PDU being handled is deferred.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds a check in the jlink runner to look for the jlink executables and
print a more useful error message if they are not found.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This adds support for the SAM0 DMA Controller (DMAC). Chained
transfer are not currently implemented.
Tested with tests/drivers/dma/loop_transfer and custom modifications
to that test using three parallel reloading channels. Also tested
with a trivial program that did memory->serial.
Signed-off-by: Michael Hope <mlhx@google.com>
[hageman@inthat.cloud: Rebased and updated commit message]
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
While configure_linker_script() may be useful for other linkers, it
currently only aimed at GNU ld. To really be useful among different
linkers, we would need to abstract its usage of the C preprocessor.
We can do this later, if needed.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Rather than associating defines within the function, let the call sites
themselves pick the appropriate define. Add new argument for this.
This also permits us to remove regex matching.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Reduce the amount of {pre,post}fixing magic: I.e. let it be clearer at
call sites that "linker.cmd" is a file, rather than having to know that
"linker" will be postfixed with ".cmd" internally.
Change argument name to linker_script_gen, to better indicate that we
are producing a generated file.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Now that we avoid the two-step procedure, we can simplify the name of
the construct_add_custom_command_for_linker_pass macro.
Move description comment up to head of definition, making the purpose
clearer.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Change construct_add_custom_command_for_linker_pass from function into
macro. The purpose of the function was to set the output variable to a
string that would be fed to add_custom_command. This meant all use
required a two-step procedure and an intermediate
variable (custom_command).
The environmental leakage from a macro in this case is small, so let's
just simplify to a macro and avoid the two-step.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Full grep reveal ALIGN_SIZING_DEP is only mentioned in cmake, where
it is never assigned a value.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
There are limits to CMSIS stack sizes, we can't just
add a number to it. Use the configured maximum.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Set to same default as regular stacks. This doesn't use
any extra memory until CMSIS_V2_THREAD_DYNAMIC_MAX_COUNT
is set. 0 is not a valid default if that is set.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Update the name of mem-domain API function to add a partition
so that it complies with the 'z_' prefix convention. Correct
the function documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Fix missing BT_CTLR_FILTER conditional compilations that
cause compile errors when device whitelisting feature is
disabled in builds.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Move GNU ld linker specific flags related to orphan handling into
toolchain_ld_baremetal().
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Move --gc-sections flag to toolchain_ld_base()
Move --build-id=none flag to toolchain_ld_base()
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Depending on configuration, this value could end up as
a variable and not an array symbol, causing a crash if
newlib decides to call _sbrk on behalf of a user thread,
which needs to perform arithmetic on it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Depending on optimization level, the TC_RESULT_STR[]
array could actually be placed in memory instead of
being expanded at compile time, resulting in memory
access errors from user mode.
Just replace TC_RESULT_TO_STR() with an inline function
containing a switch statement instead.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The various struct pipe_sequence were not located in memory
accessible to user mode. With optimization turned on, they
weren't in memory at all, but with code coverage enabled
the arrays were actually being read, resulting in memory
access failures from user mode.
Fix them by placing in ROM, they never get modified.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Renamed function vendor_cmd_handle to vendor_cmd_handle_common for
shared vendor commands. This allows vendor to implement
vendor_cmd_handle, containing both common and specific handling.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Andrew Boie