Convert to use DT_IRQN() and DT_IRQ() to get the irq number and priority
for the DT_NODELABEL(gpiote) device.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert bluetooth samples or board samples using bluetooth to use the
new k_timeout_t struct.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Replace DT_FLASH_DEV_NAME with DT_CHOSEN_ZEPHYR_FLASH_CONTROLLER_LABEL.
We now set zephyr,flash-controller in the chosen node of the device
tree to the flash controller device.
NOTE: For a SoCs with on die flash, this points to the controller and
not the 'soc-nv-flash' node. Typically the controller is the
parent of the 'soc-nv-flash' node).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
According Mesh Profile 1.0.1. A application key shall
binding single network key. And Device key shall bind all
network key, and dev key only known by cfg_cli and node self,
only used by cfg_cli & cfg_srv.
Fixes: #21088
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Provide a description of the sample and how it works with different
power supply source configurations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When the system is powered directly a measurement of Vdd provides the
battery voltage. This requires a different ADC configuration and
level curve.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
To obtain lower power measurements in general, we should turn off the
external flash which is on by default at boot.
Code is modeled based on examples shipped in the TI SimpleLink SDK.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Adding an example that exercises the sleep modes, then powers off the
system by going into deep sleep.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Replace use of Kconfig UART_X symbols by calls to DT API.
Clean driver from symbols definitions
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Now the ARC SecureShield related features are experimental. The ARC
normal application cannot run alone, need the secure service example to
initialize the context and boot.
Here move ARC normal related configurations out of board dir to
avoid the impact of CI test and the confusion to users.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The origin for sleeping for 3ms after coming out of deep sleep
was to wait for PLL to lock so that UART would not send
garbage characters due to incorrect clock. In the deep sleep
code, it spins to wait for the PLL to lock so there is no need
to wait for 3ms in the app. So shorten it like other busy wait.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Threads are being re-used for multiple runs, so it is better to
stop the threads before reusing the variables for new threads.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The board name for the Thingy:52, so far known as nrf52_pca20020, is
renamed to thingy52_nrf52832. Its documentation and all references to
its name in the tree are updated accordingly. Overlay and configuration
files specific to this board are also renamed, to match the new board
name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We rename the nRF91 Dev Kit board target (nrf9160_pca10090)
to nrf9160dk_nrf9160. We update all associated references
in the supportive documentation and all nRF9160-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Deprecate BT_LE_ADV defines in hci.h that are expected to be used by the
application in the scan received callback to identify the advertising
PDU type. These defines are mixing HCI input parameters and advertising
PDU types. Internally it is acceptable to mix these, but at the API we
should to mix in them.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Deprecate bt_create_conn_le and rename it to in order to add return
code, new arguments and to follow the established naming convention.
Add API for the application to control the scan parameters of the
initiator role. This allows the application more scheduling control
of the initiator in multi-role scenarios. Also provides options to
configure the initiator for LE Coded PHY for long range support.
We deprecate the old way of creating connection to make the name more
consistent with the rest of the API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Sample code that demonstrates power management features on
MEC15xx-based boards.
It showcases how an app can enter into light and deep sleep.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This test can't be evaluated with sanitycheck, it
requires special set-up on multiple AMP cores to
function properly. Add build_only tag.
Fixes: #19643Fixes: #22317
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Convert to the new GPIO API using logical levels, and remove the
duplicate implementation of LED control that existed.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the gpio_counter sample app for the UP Squared board:
() Update configuration calls to use new flags.
() Separate pin configuration into setting it to input, and
setting the pin for interrupt.
() Use gpio_pin_set() instead of gpio_pin_write().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use the voltage divider devicetree binding to demonstrate measurement
of battery voltage for two Nordic-based boards that have the necessary
circuitry.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
These configuration files all enable UART_CONSOLE, which selects
CONSOLE_HAS_DRIVER.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add support for requesting an inverted PWM pulse (active-low) when
setting up the period and pulse width of a PWM pin. This is useful
when driving external, active-low circuitry (e.g. an LED) with a PWM
signal.
All in-tree PWM drivers is updated to match the new API signature, but
no driver support for inverted PWM signals is added yet.
All in-tree PWM consumers are updated to pass a flags value of 0
(0 meaning default, which is normal PWM polarity).
Fixes#21384.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The usb_transport_init() does not return a value when it fails to
initialize the USB device. So add a return value there.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit introduces a new Kconfig symbol MCUMGR_SMP_BT_AUTHEN.
When selected it configures the Bluetooth mcumgr transport to require
an authenticated connection.
If the Bluetooth mcumgr transport is selected then this new symbol is
selected by default. Bluetooth SMP is also selected to ensure Zephyr
is configured with Bluetooth security features enabled to provide
Bluetooth authentication APIs to the user's app. Users can choose to
disable this level of security for the Bluetooth mcumgr transport if
they do not require it.
Fixes#16482
Signed-off-by: Nick Ward <nix.ward@gmail.com>
By this commit user gets possibility to register USB
device satutus callback. This callback represents device state
and is added so user could know what happend to USB device.
Callback is registered by providing it to usb_enable()
USB api is extended by this callback handler.
Samples using using USB are by default provide no callback
and the usb_enable() is called with NULL parameter.
Status callback registered by hid class is deleted as now
USB device has global callback for all classes within device.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added some preprocessor directive so that code get compile
for some more nRF52 boards which has only one LED & one button.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Changes in MOVE message handler are as per Mesh Model
Specification which says:
"Upon receiving a Generic Move Set message, the Generic Level
Server shall respond with a Generic Level Status message.
The target Generic Level state is the upper limit of the
Generic Level state when the transition speed is positive,
or the lower limit of the Generic Level state
when the transition speed is negative."
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Kumar Gala