We use ZTEST_DMEM and ZTEST_BMEM for running tests with memory shared
between userspace and kernelspace. This ought to be documented.
Document ZTEST_DMEM and ZTEST_BMEM.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
The command did no longer set the user specified data if the user
specified more than 1 AD field.
We were using the return value of ad_init() to set the number
of AD fields. This did not take into account the number of
existing data fields. By chance this usually returned 1.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
In case a TCP connection should be established with a specific source
IP address (e.g., by calling bind() prior to connect() on the socket),
we have to actually place the address in the outgoing packet.
Signed-off-by: Tobias Frauenschläger <t.frauenschlaeger@me.com>
To prevent failure stopping a ticker node after starting it within the
same ticker_job execution (queued operations), defer the stopping until
after start. This will sequence the operations correctly and prevent
failures.
Signed-off-by: Morten Priess <mtpr@oticon.com>
For config CONFIG_BT_CTLR_CONN_ISO_RELIABILITY_POLICY, set
CIG_Sync_Delay fixed as high as possible, and calculate FT by iteration.
This favors utilizing as much as possible of the Max_Transport_latency,
and spreads out payloads over multiple CIS events (if necessary).
Add exit with cleanup as ll_cig_parameters_commit may fail after
creating new CIG/CIS instances.
Fixes issue #59605.
Fixes EBQ test HCI/CIS/BI-12-C.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When CONFIG_KERNEL_DIRECT_MAP enabled, the region to be mapped
or unmapped can be outside of the virtual memory space, wholly
within it, or overlap partially. Additional processing is
needed to make sure we only manipulate the bits within
the bitmap, in other words, only the pages represented by
the bitmap.
Fixes#59549
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Check the packet lenght in flash_write operation beforeSigned-off-by
copying it to an internal buffer.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Implement the sys_poweroff hook for all ESP32 SoCs based on the previous
SOFT_OFF implementation.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Since bb590b5b6e, which enforces a more consistent ordering of
initialisation for devices, the ECIA initialisation was happening after
GPIO initialisation. This caused interrupts to stop working on GPIO
input.
This patch fixes that by increasing the default GPIO initialisation
priority, so that it happens after ECIA.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Since bb590b5b6e, which enforces a more consistent ordering of
initialisation for devices, the SOC initialisation was happening after
GPIO initialisation. This caused interrupts to stop working on GPIO
input.
This patch fixes that by increasing the default GPIO initialisation
priority, so that it happens after SOC.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
In case CAN-FD mode is not enabled the mcux flexcan driver supports
CAN_MODE_3_SAMPLES.
This has been removed inadvertently while adding can-fd support.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Convert the ISO-TP SF length check in send_sf() from __ASSERT() to a
runtime check.
Fixes: #61501
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This follows the same convention that has already been adopted by Intel
Alder Lake and Raptor Lake boards.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of link to a list of Alder Lake N products use a link to a
design document: Intel Processor and Intel Core i3 N-Series datasheet.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add ipm driver to use Inter Processor Interrupts
on Xilinx ZynqMP platform. This patch also adds sample
application that shows use of xlnx ipm driver.
This driver uses default arm gic interrupt controller
and works only for lockstep mode of cortex-r5f
cluster for now.
In split mode the cortex-r5 cluster will
have two r5f cores and they are expected to work in AMP
mode. If both r5f cores run simultaneouly, only one of
the core is able to receive IPI interrupts at this time
and it will be the one that started later. In future
this limitation shall be removed.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
openamp shared memory regions can be anywhere in DDR memory
withing 2G range. Current SRAM_PRIV region is 64M which
prevents access of shared memory (vrings) by RPU (cortex-r5)
if it is out of 64M range. This patch allows vrings to be in DDR within
2G address space.
Developed-by: Dan Millea
Commited by: Tanmay Shah
Signed-off-by: Dan Milea <dan.milea@windriver.com>
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
the dev pointer is already dereferenced before this function is
called, so this check does not make any sense.
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
Add `yd_esp32` board:
- Model name: YD-ESP32
- Manufacturer: VCC-GND® Studio
- Espressif module: ESP32-WROOM-32E
Signed-off-by: Julio Cesar <hi@jcsx.dev>
There is no reason why the capabilities
should be modified by the stack after registration,
nor any reason why a the unicast client application
needs to modify the reported remote capabilities, so
all have been marked as const.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactor the bt_audio_codec_cap to use flat arrays to store
metadata and codec specific capabilities.
The purpose of this is to make it easier to copy the data
between layers, but also to support non-LTV data for non-LC3
codec capabilities.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This diff removes a build assert that no longer makes
sense due to the fact the MAX_IRQ_PER_AGGREGATOR number
does not need to fit into only the first level interrupt
bits. Before the extension of the interrupt bit masks if
the MAX_IRQ_PER_AGGREGATOR bits was larger than the first
level of interrupts then the first level bits could overflow
into the second level. This is no longer necessary to check
since the user can set the correct number of bits needed per
level.
Signed-off-by: Joshua Lilly <jgl@meta.com>
Instead of sending output strings to stdout via fputs(), just
print them using printk(). This allows the output to be detected
by twister.
Fixes#60676
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Various fixes to LwM2M doxygen documentation
- document all macros
- mount path helpers in lwm2m_api doxygen group
- hide internal macros
- created proper header definitions for macros that belong together
(ex. result codes)
- fixed capitalization for Objlnk
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Following #56576, the `cs` field in `struct spi_config` is of type
`struct spi_cs_control` instead of a pointer to the same type.
This PR updated the driver to use `spi_cs_is_gpio()` helper to
check if SPI CS is controlled using a GPIO.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
This adds refactor of bt_vocs object that is common interface for client
and server commands. As the bt_vocs_client is significantly larger than
bt_vocs_server the memory usage is not optimized when bt_vocs has an
union of those. Thus RAM consumption has been minimized by using
CONTAINER_OF macro to reference either to bt_vocs_client or
bt_vocs_server instance that bt_vocs is a member of.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The VOCS API uses `bt_vocs` object to reference both client and server
instance. This adds missing instance type checks to avoid invalid API
usage.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Time between the start of 2 consequtive advertising events consists
of advertising interval and delay. If delay is zero and the measured
interval is the interval between the last or prelast packet and the
first packet of the next adv event, the measured time can be less than
adv interval.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
When settings_load() is not called from system workqueue, but still
called from a cooperative thread, rescheduling during the settings
loading can wake up system workqueue and try to register the Mesh
Proxy Service, which can not be allowed yet. This is the case for bsim
tests.
Postpone registering the service with some small timeout.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This fixes possible buffer overflow that may happen when `buf->len`
equals `buf->size` while adding null terminator.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The font existence is checked at the time of linking,
The check at initialization is no longer necessary.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Balsundar Ponnusamy