Replace all existing deprecated API with the recommended alternative
for gsm_mux and uart_mux drivers.
Fixes#34103
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This CL introduces two configuration options which allows a notification
to the power management module that the UART console module is in use
now. If the interval of console module doesn't receive any input message
exceeds expired timeout, the power management module is allowed to enter
sleep/deep sleep state and turn off the clock of console module.
This mechanism gives a window in which the users can organize input
message if CONFIG_PM is enabled.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Currently there is no way to distinguish between a caller
explicitly asking for a semaphore with a limit that
happens to be `UINT_MAX` and a semaphore that just
has a limit "as large as possible".
Add `K_SEM_MAX_LIMIT`, currently defined to `UINT_MAX`, and akin
to `K_FOREVER` versus just passing some very large wait time.
In addition, the `k_sem_*` APIs were type-confused, where
the internal data structure was `uint32_t`, but the APIs took
and returned `unsigned int`. This changes the underlying data
structure to also use `unsigned int`, as changing the APIs
would be a (potentially) breaking change.
These changes are backwards-compatible, but it is strongly suggested
to take a quick scan for `k_sem_init` and `K_SEM_DEFINE` calls with
`UINT_MAX` (or `UINT32_MAX`) and replace them with `K_SEM_MAX_LIMIT`
where appropriate.
Signed-off-by: James Harris <james.harris@intel.com>
This also makes it into arch_printk_char_out() which gets linked
in place of the weak symbol version, meaning printk() is usable
as soon as the stack is set up.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Convert driver(s) to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Put everything inside an if, we should not see anything related to
uart_mux in generated .config if it is not enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The mcumgr header files are now in include/mgmt/mcumgr/, so reflect this
change in the UART console implementation.
Fixes#30261.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When PPP is muxed, using uart_poll_out resulted in each byte getting
wrapped in a muxing header. This led to UART bombardment which
can quickly cause some modems to hang and panic. This was observed
regularly using a SIMCOM7600E modem.
A perfect fix would involve rewriting ppp.c, uart_mux.c and
modem_iface_uart.c to all use another UART API, but that would be more
invasive by several orders of magnitude than this one, which utilizes
the fact that the uart_mux implementation of uart_fifo_fill does NOT
require ISR context. Since the Zephyr UART API states that the behavior
of uart_fifo_fill outside of ISR context is implementation defined, this
should be kosher.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
These changes enable applications to restart the networking stack which
was previously not possible without rebooting the device. This was a
major show-stopper because it made power management impossible, and
furthermore made it impossible to recover from a bad modem state without
rebooting.
This has been verified to work on a SIMCOM7600E modem, both with and
without CONFIG_GSM_MUX enabled.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Add console over Inter Processor Mailboxes (IPM).
This is useful for AMP processors like ADSP found on up_squared board.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The conversion last year mixed up uart-pipe with uart-mcumgr. Revert
to the pre-conversion relationship.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ringbuf claim API returns pointer to contiguous area. In cases when data
in ringbuf wraps the end of internal buffer, then single call to claim
data is not enough to get all data - there is remaining part on the
beginning of internal buffer. Those remaining bytes will need to wait
for next ISR handler to trigger workqueue. Theoretically this means that
data on the beginning of ringbuf can wait there forever.
Consume data from ringbuf in a loop, stopping only when claiming results
in empty buffer. This will make sure that there is no stale data in the
ringbuf.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This patch removes unused Kconfig option from console
subsystem. If application wants to wait until the console
port is connected, enabled and ready to receive data
it should use uart_line_ctrl_get() API function and
check for DTR flag.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
usb_enable() must be called once by the application.
The application may want to register usb_dc_status_callback
and trace usb status codes (usb_dc_status_code).
After this patch all pre APPLICATION messages will be dropped
as USB console device is enabled in the application.
Application waits for console device until its ready by checking DTR
flag - uart_line_ctrl_get(). This function could be dropped but then
some log messages that were generated before USB device is ready
could also be dropped.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This set of functions seem to be there just because of historical
reasons, stemming from Kbuild. They are non-obvious and prone to errors,
so remove them in favor of the `_ifdef()` ones with an explicit
`CONFIG_` condition.
Script used:
git grep -l _if_kconfig | xargs sed -E -i
"s/_if_kconfig\(\s*(\w*)/_ifdef(CONFIG_\U\1\E \1/g"
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to be able to add more entries under 'subsys/mgmt', move the
current contents of it, which relate exclusively to MCUMgr, to its own
folder.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Of course IPM drivers now provide their device instance. There are 2
drivers using IPM callbacks as well, so they get the imp device instance
pointer now through the callback.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It was already using uart_irq_callback_user_data_set below, now it also
uses uart_irq_callback_user_data_t as callback type, so let's normalize
the callbacks.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Some Kconfig defined devices may be defined using dt_chosen_label
function. Since there is no way to ensure a device enabled in dts
is also defined in Kconfig, it may happen that instance is not
actually defined.
In this case device_get_binding might return 0, leading to undefined
behavior in the function that calls it.
When not already done, systematically check return of function
device_get_binding on devices defined through dt_chosen_label macro.
Trigger ASSERT when required and return error when possible.
Fixes#20068
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Many chips have only one serial port. When the serial port is occupied
by other devices, there is a lack of a console to output debugging
information. Semihosting can provide a console. The disadvantage of
semihosting is that a debugger must be connected, so it can only be
used for online debugging.
Signed-off-by: ZhongYao Luo <LuoZhongYao@gmail.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Instead of global workqueue, use own one so that the users of this
driver can more conveniently use global one. This means GSM modem
can work better with the UART muxing driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create support for muxed UARTs which are attached to a real
UART and which use GSM 07.10 muxing protocol to create virtual
channels that can be run on top of the real UART.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support to GSM 07.10 muxing protocol which is used to
share the same UART for PPP and AT commands among other things.
This allows e.g., the modem to send SMS and have PPP connection
active at the same time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Telnet console was move as a shell backend and is not anymore part of
console drivers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
usb-device.h must be included only if CONFIG_USB_UART_CONSOLE is
defined, otherwise it is not used and will pull a lot of usb code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Peter Bigot