Today, there is a build target is added for each runner: flash, debug,
debugserver, attach.
And those runners will have a dependency to Zephyr logical target that
is built before invoking `west <runner>`.
This design has some flaws, mainly that additional dependencies directly
on the target will not be built when running `west <runner>` directly.
That generator expressions cannot be used for the DEPENDS argument.
Instead, the build target `<runner>` will not have any dependencies, and
will raise a build error if a dependency is added to the target.
Due to how `add_dependencies()` work, this must be done as a build time
check, and not configure time check.
`west <runner>` will invoke a build before executing the runner, and
this way ensure the build target is up-to-date, which again removes the
need for a dedicated `west_<runner>_target`.
It also minimizes the risk of developer errors, as developers no longer
need to consider the need for adding additional dependencies.
If a custom target is part of the default `all` build, then it's ensured
to be up-to-date.
Fixes: Issue reported on slack.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Some targets require *strip* command. This command was not
being set when selecting llvm toolchain.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
When compiler results are piped through a non-terminal (e.g. ninja)
the compiler disables colour diagnostics. Using `-fdiagnostics-color`
forces the compiler to enable colour output. This flag is set for
clang and gcc when `ZEPHYR_BUILD_COLOUR_DIAGNOSTIC` environment
variable is set when a clean build is started.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
The parameter can be used to limit the ram and rom reports to a
certain depth. The resulting graphs with depths of e.g. 3 or 4 are
visually easier to grasp.
Signed-off-by: Detlev Zundel <dzu@member.fsf.org>
Use -march=armv8.4-a to compile zephyr on cortex-R82.
Because Cortex-R82 has not been enabled in GCC 10.x currently.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
Add arm fvp emulator in order to use ninja run or west build -t run.
Add armfvp in order to run twister.
Set env ARMFVP_BIN_PATH before using it,
e.g. export ARMFVP_BIN_PATH=<path/to/fvp/dir>
NOTE: ARMFVP_BIN_PATH is the dir path.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
The system include directory might include spaces on windows, so quote
it.
Partially part of fix for #32111
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The usage of EXTRA_DTC_FLAGS was removed in commit
269f350487
If ninja was used and e.g. menuconfig is called, when more than one
element is in EXTRA_DTC_FLAGS, calling "ninja menuconfig" failed.
E.g.
west build -b lpcxpresso55s28_ns -t menuconfig samples/hello_world
resulted in and error. This is fixed with this commit.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Split ARM and ARM64 architectures.
Details:
- CONFIG_ARM64 is decoupled from CONFIG_ARM (not a subset anymore)
- Arch and include AArch64 files are in a dedicated directory
(arch/arm64 and include/arch/arm64)
- AArch64 boards and SoC are moved to soc/arm64 and boards/arm64
- AArch64-specific DTS files are moved to dts/arm64
- The A72 support for the bcm_vk/viper board is moved in the
boards/bcm_vk/viper directory
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add initial support for the Cortex-M55 Core which is an implementation
of the Armv8.1-M mainline architecture and includes support for the
M‑profile Vector Extension (MVE).
The support is based on the Cortex-M33 support that already exists in
Zephyr.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixes: #33138
Board alias and deprecated board handling is setting the BOARD variable
after zephyr_boilerplate_watch(BOARD) has been executed.
This results in the board changed warning.
This commit moves the zephyr_boilerplate_watch(BOARD) code below the
board alias and deprecation handling.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
-P is an option that was inherited from the old MetaWare compiler.
[ccac foo.c -P] is actually a shortcut for: [ccac -E foo.c -o foo.i].
In new version of mwdt, -P option can't redirect the output. we need
to use -E option, which works in all versions.
-P: Preprocess the file and write it to <src>.i (C) or
<src>.ii(C++). No compilation is performed.
-E: Run preprocessor only.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
`west` is an optional tool.
Although `west` is optional, a developer might be working with both west
and non-west based projects, like
- vanilla Zephyr (using west)
- downstream project (not using west)
and thus have west installed, but not always in use.
In the downstream project scenario not using west, then running CMake
will print the following error:
```
FATAL ERROR: no west workspace found from "<path>/zephyr";
"west topdir" requires one.
Things to try:
- Change directory to somewhere inside a west workspace and retry.
- Set ZEPHYR_BASE to a zephyr repository path in a west workspace.
- Run "west init" to set up a workspace here.
- Run "west init -h" for additional information.
```
This commit sets `WEST` CMake variable to `WEST-NOTFOUND` when west is
found but Zephyr is not in a west workspace (`west topdir` fails)
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
With the introduction of #32556 changing the BOARD now prints a warning.
Zephyr provides `zephyr_file()` to look up overlays and Kconfig
fragments for a specified board, and it used to be possible and safe to
do:
```
function(my_func)
set(BOARD <local_scope_board>)
zephyr_file(CONF_FILES ...)
endfunction(my_func)
```
As the BOARD inside `my_func` is locally scoped, this is safe to do.
But with introduction of #32556 a warning is now printed when running
CMake.
Therefore `zephyr_file` has been extended to allow for optional BOARD
and BOARD_REVISION arguments.
If BOARD is not given as argument the current BOARD in the build system
will be used.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Watching of specific Zephyr CMake build variables ensure users cannot
accidentally set important variables, such as BOARD, SHIELD, CONF_FILES
late in the build process.
This was also added to zephyr_check_cache() function.
However, the BOARD provided by the user may look as `<board>@<revision>`
and will be kept in the cache in that form.
However, the BOARD value from cache is spit into internal build
variables as: BOARD=<board> and BOARD_REVISION=<revision>.
However, this is done after `zephyr_check_cache()` which then triggers
the variable watch to trigger, and printing a warning when using board
revisions.
Therefore WATCH is now optional for `zephyr_check_cache()` and watch for
BOARD variable will be enabled when boilerplate has completed all board
handling.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
We don't use xcheck (we disable it by passing '-Hnoxcheck' to
linker) so let's avoid xcheck object linkage as well by
passing '-Hnoxcheck_obj' option.
'-Hnoxcheck_obj' option implies the '-Hnoxcheck' option.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Remove duplicates from ZEPHYR_MODULE_NAMES only if that list
exists. That avoids cmake error "list sub-command REMOVE_DUPLICATES
requires list to be present" if ZEPHYR_MODULE_NAMES is empty.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Some toolchain variants come with no clang support, so do not assume
clang by default and enable this using the enviornment variable
XCC_USE_CLANG.
export XCC_USE_CLANG=1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
People frequently do things like setting BOARD_ROOT to
/my/module/boards/arm/my_board when it should be set to /my/module.
Similar misconfigurations happen for SOC_ROOT.
Emit warnings in these situations to try to point users in the right
direction.
A similar change could be made for DTS_ROOT, but that is trickier
since at least one directory (the application root) is legitimately
added to it that does not always contain dts/ or include/
subdirectories.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
To remove the need of empty config files, the `board_check_revision()`
now accepts a list of valid revisions.
As example:
```
board_check_revision(
FORMAT MAJOR.MINOR.PATCH
VALID_REVISIONS 0.1.0 0.5.0 0.10.0
)
```
The code is still compatible with the `<board>_<revision>.conf` changes
so that if different revisions of a board has Kconfig differences, then
there is no need to also specify the list of valid revisions.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Make sure the flags in EXTRA_DTC_FLAGS are valid for the version of dtc
we have and only invoke dtc with flags it supports.
Fixes#32644
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixes: #32269
This commit is a followup to #31877 where the `${shield_dir}/${s_dir}`
was adjusted to `${SHIELD_DIR_${s}}` to ensure only including shields
and not boards in list of known shields.
An `if(EXISTS ${shield_dir}/${s_dir}...)` was missed in this process
which causes #32269. This is corrected in this commit.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Several variables must be set by the time boilerplate.cmake is run.
This includes BOARD, SHIELD, CONF_FILE, and DTC_OVERLAY_FILE.
It's not always clear to users that this is the case, and we sometimes
see attempts to modify these variables in app CMakeLists.txt files
after find_package(Zephyr ...) lines, where they will have no effect.
This causes confusion.
Add a new extension function, zephyr_boilerplate_watch(), which traps
attempts to set these variables and prints a noisy warning. Use it
from boilerplate.cmake on the variables mentioned above.
This will hopefully make it clearer at build time why the changes are
being ignored.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add ability to build a UF2 (https://github.com/Microsoft/uf2)
image as an additional output type. This leverages the code
partition offset for the UF2 base address, and a configurable
UF2 family ID.
Includes an unmodified (except for headers for licensing, pylit
disabling) version of the uf2conv.py script copied the UF2
format specification repository, used to convert the bin to UF2.
Origin: UF2 file format specification reference utilies
License: MIT
URL: https://github.com/microsoft/uf2/blob/master/utils/uf2conv.py
commit: 587abb8b909266e9b468d6284f2fbd425235d1b5
Signed-off-by: Pete Johanson <peter@peterjohanson.com>
Treat shield directories containing a dts subdirectory as a DTS root
directory.
This allows shield specific devicetree include files and bindings to be
stored under the shield dts subdirectory.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The following two lines are duplicated in boilerplate.cmake
```
zephyr_file(APPLICATION_ROOT BOARD_ROOT)
list(APPEND BOARD_ROOT ${ZEPHYR_BASE})
```
This commit removes one set of the duplicated lines.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
'-Wexpansion-to-defined'
Warn whenever 'defined' is encountered in the expansion of a macro
(including the case where the macro is expanded by an '#if'
directive). Such usage is not portable. This warning is also
enabled by '-Wpedantic' and '-Wextra'.
This is enabled by default in llvm but not in gcc. Given that it is 'not
portable', lets disallow this in gcc and keep both compilers in sync.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fixes: #23449
This commit adds additional OUTPUT and BYPRODUCTS to custom command
and targets in the Zephyr build system.
This ensures that files produced during the build will be removed again
when invoking ninja clean / make clean.
The generated syscalls headers include folder is added to the syscall
target using ADDITIONAL_CLEAN_FILES property.
However, this property is new in CMake 3.15, so will not work when using
older CMake with ninja.
For CMake versions <=3.15 the ADDITIONAL_MAKE_CLEAN_FILES property is
used. However, this only supports Makefile generator.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #30713
Now using the common script `verify-toolchain.cmake` for verifying
toolchain settings.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Since EXTRA_DTC_FLAGS will be ';' seperated if we pass that as is if
there are multiple items in the list we'll get an error. Sanitize
EXTRA_DTC_FLAGS by replacing ';' with ' ' before we call gen_defines.py
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This allows users to overrule a module from command line.
As example, the Zephyr build system loads the module FOO from
`modules/FOO`, but user has a custom FOO locally at `custom/FOO` and
would like to use this module instead of manifest specified.
If user does `-DZEPHYR_EXTRA_MODULES=custom/FOO` the following error
will be seen:
```
The binary directory
build/modules/FOO
is already used to build a source directory. It cannot be used to build
source directory
custom/FOO
Specify a unique binary directory name.
```
Removing duplicates from the list allows a user to use
`-DZEPHYR_EXTRA_MODULES=custom/FOO` and thus replace `modules/FOO` for
the current build.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #26522
Now searching for Kconfig.shield instead of recursively looking for
overlay files.
Globbing recursively for overlay files also picks up board overlays,
which leads to errors in the shield handling, as user could wrongly
specify certain boards as shields.
Also it led to wrongly list some board as shields, as reported
in #26522.
The folder containing a Kconfig.shield is then used when looking up
overlay files, as all overlay files in that folder represents a shield.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This is a follow-up to commit 77ecd6837d.
Add missing check that looks for a revision specific overlay located
in the `<app>/boards/` directory similar to how overlays and Kconfig
fragments are handled.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #30553
The `;` in a list must be escaped when used as for execute_process and
add_custom_target, as those functions are using `cmake -E env` to setup
correct environment before executing kconfig and menuconfig.
This commits escapes `SHIELD_AS_LIST` variable list correctly before
using it.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Calling cmake/pristine.cmake now requires SOURCE_DIR and BINARY_DIR as
arguments.
This ensures that pristine.cmake can evaluate if pristine is requested
on in-source builds, and bail out in such case with an error message.
All uses of `pristine.cmake` has been updated to use the new arguments.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This adds the correct compiler and linker flags to
support software floating point operations. The flags
need to be added to TOOLCHAIN_*_FLAGS for GCC to find
the correct library (when calling GCC with
--print-libgcc-file-name).
Note that software floating point needs to be turned
on for Newlib. This is due to Newlib having floating
point numbers in its various printf() functions which
results in floating point instructions being emitted
from toolchain. These instructions are placed very
early in the functions which results in them being
executed even though the format string contains
no floating point conversions. Without using CONFIG_FPU
to enable hardware floating point support, any calls to
printf() like functions will result in exceptions
complaining FPU is not available. Although forcing
CONFIG_FPU=y with newlib is an option, and because
the OS doesn't know which threads would call these
printf() functions, Zephyr has to assume all threads
are using FPU and thus incurring performance penalty as
every context switching now needs to save FPU registers.
A compromise here is to use soft float instead. Newlib
with soft float enabled does not have floating point
instructions and yet can still support its printf()
like functions.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The introduction of Zephyr module glue code in the Zephyr repository
introduces a Kconfig variable in the form of:
`config ZEPHYR_<MODULE_NAME>_MODULE`.
All Kconfig variables go into `autoconf.h`, therefore it is necessary
to sanitize the Kconfig variable, so that it does not contain special
characters. To ensure consistent variable name, then the module name
will be sanitized in all variable use in both Kconfig and CMake.
The sanitization is done be replacing all special characters with an
underscore, `_`.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #28847
This commit fixes two places that was causing gen_relocate_app to fail
in windows.
gen_relocate_app.py now splits only on first `:` in
`<MEM_REGION>:<file>`.
Windows contains `:` in path, thus only first `:` is valid for splitting
mem region and file path.
Second part of the issue is fixed in CMake where `'` was used for
quoting of command arguments.
This causes a file not found on Windows because the final `'` would be
treated as part of the filename. Similar the first `'` would be treated
as path of the mem region name.
This is fixed by using `"` for quoting, which works correctly on all
platforms.
gen_relocate_app.py:403: UserWarning: File: .../kernel/sem.c' Not found
Note the stray `'` ^^^
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
In bash a '&&' cannot follow directly after a '&'. So a task that is
run in the background should be enclosed in (curly) braces.
This:
```
west build -b qemu_x86 -d build/server samples/net/sockets/echo_server\
-- -DOVERLAY_CONFIG=overlay-qemu_802154.conf -DPCAP=capture.pcap
west build -t server -d build/server
```
works correctly after this fix.
Fixes#29793
Signed-off-by: Daniel Noom <ggatw@outlook.com>
