This adds very simple peripheral application that supports
Device Information Service only and doesn't support pairing.
Change-Id: Iaec1317a8894db11388408d3f65af8a38d1618c3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This was not building due to bt_l2cap_create_pdu API change.
CC net/bluetooth/smp_null.o
net/bluetooth/smp_null.c: In function 'bt_smp_recv':
net/bluetooth/smp_null.c:59:2: warning: passing argument 1 of 'bt_l2cap_create_pdu' from incompatible pointer type [enabled by default]
buf = bt_l2cap_create_pdu(conn);
^
In file included from net/bluetooth/smp_null.c:32:0:
net/bluetooth/l2cap_internal.h:136:17: note: expected 'struct nano_fifo *' but argument is of type 'struct bt_conn *'
struct net_buf *bt_l2cap_create_pdu(struct nano_fifo *fifo);
Change-Id: I5fd8ce63da09af1c123b1092624d48edc009756b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch adds document with current supported PICS for PTS 6.3.
Change-Id: Ib87d9432087225612b01d849eced6ad5c2064f0b
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds document with current supported PICS for PTS 6.3.
Change-Id: I1eb62d500fb8b1bb9ec9162f9b0196858fe22b0a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Analyze stack when sending single ACK packet.
Change-Id: Ifd3a54f0d1ad9a644363563fa9b8bea05b895fa9
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If there is no packet to be sent after timeout we have to send ACK for
last received packet.
Change-Id: I30bbc4ae1a257f9a7351dc5a5d2f1269740ce447
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add initial code for three-wire (H5) Bluetooth uart driver.
At the moment the driver is EXPERIMENTAL. To test use following
method with qemu:
Run btproxy with three-wire emulation patches:
$ sudo tools/btproxy -d --pty -3
Opening pseudoterminal
New pts created: /dev/pts/21
Opening user channel for hci0
Notice that new device created: /dev/pts/21, use it with qemu -serial
parameter.
Run qemu target with following parameters:
$ make qemu 'QEMU_EXTRA_FLAGS=-serial /dev/pts/21'
Change-Id: I51579ffd8088583df9106689a03b2a0b4aa9e4cb
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
BT_STACK depends on BT_STACK_DEBUG_EXTRA, therefore moving it there.
It also allows to use BT_STACK in drivers, at the moment only
Bluetooth stack uses it.
Change-Id: I41e0e0d49dae6abef2dc3a8d1d109127787d3db0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove extra line and correct style according to common style.
Change-Id: I5fc9434edce44e52b51fc40866638c0899985b1b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This is in preparation for LE SC only mode support where slave LTK
support is not compiled in.
Change-Id: Ia30ca08010f8aa42752c4a422fd0ddc1fbdb4f31
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Make sure the name reflects that it is used only for legacy pairing.
Change-Id: I757311991e9f879f377978b8adb02c7f9758b6b2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
All legacy pairing code is now separated in dedicated helper functions
(with 'legacy' prefix). Main code flow is LE SC oriented and legacy
pairing is always handled as exception from LE SC code:
if (!atomic_test_bit(&smp->flags, SMP_FLAG_SC)) {
return legacy_foo(smp);
}
This is in preparation for enabling LE SC only mode.
Change-Id: I89705e6b780014417adaed41bd3beaf4791d8d3f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This function is not used outside of smp.c file.
Change-Id: Ib2158330959f2b4b1d63695480e82ac506243ab8
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
In order to support more standard descriptors, the PF macro and helper
function are added.
Change-Id: I52db3c32f40f39b9c6bfdb9573d0a614d0f3295e
Signed-off-by: Louis Caron <louis.caron@intel.com>
In order to support more standard descriptors, the UD macro and helper
function are added.
Change-Id: Ic9a82658668107b40abc5c98002fe5091dc10f08
Signed-off-by: Louis Caron <louis.caron@intel.com>
This patch replaces bt_gatt_attr_func_t with bt_gatt_discover_func_t
to be used as a type of discovery callback. The reason is
bt_gatt_attr_func_t don't return bt_conn which could be used
later on to issue other commands and to application to know
from which connection this results come.
Change-Id: I1f26c72ad5c8a0b97485a337c7005d34281586d7
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Read Multiple Characteristic Values command handler
to the tester. It allows to test if GATT Client can read multiple
values from a GATT Server.
Change-Id: I994ffac73eb8e6c0a7696dc41304efd9f01c35a4
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Long Write Characteristic Value/Descriptor command handler
to the tester. It allows to test if GATT Client writes long values properly.
Change-Id: I788707b0a043ecad6be32d9e1f8d536765ebf41a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Write Characteristic Value/Descriptor command handler
to the tester. It allows to test if GATT Client performs write
operation properly.
Change-Id: I3afe167c7ca2789df7d288bbc06ffc8479240da8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Read Long Characteristic Value/Descriptor command handler
to the tester. It allows to test if GATT Client can read long value from
a GATT Server.
Change-Id: I1c2060f7ecd45ca18ed5f9e0747121236b283631
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Read Characteristic Value/Descriptor command handler
to the tester. It allows to test if GATT Client can perform read
attribute value from a GATT Server.
Change-Id: If95b8d2d3a5a62048bb6371ae80b2834c20d88e1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Signed Write Without Response command handler to the tester.
It allows to test if GATT Client can perform signed write operation without
acknowledgement form Server.
Change-Id: I14757e6a52abf87bed68103b2e6fbff200fb6bb8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Write Without Response command handler to the tester.
It allows to test if GATT Client can perform write operation without
acknowledgement form Server.
Change-Id: I3663e2e01c0fabfd75e4bedab0955700e3003522
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Discover All Characteristic Descriptors command handler
to the tester. It allows to test if GATT Client can perform discovery of
characteristic descriptors within specified range.
Change-Id: Ieb04b47168249d8d76eab840b4f54b8b6b450792
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Discover Characteristics by UUID command handler
to the tester. It allows to test if GATT Client can perform discovery
of characteristics based on known UUID.
Change-Id: Iab78ea7e5bc85e1fadc46b7e8f5b28ee4b9db16d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Discover All Characteristics command handler to the tester.
It allows to test if GATT Client can perform discovery of all
characteristics contained within specified range.
Change-Id: Ib70abaf1365fe4a73757507148723e66881b01de
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Find Included Services command handler to the tester.
It allows to test if GATT Client can perform relationship discovery.
Change-Id: I76c12fcd5e79d906b4e29b926a82a2022e505c40
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Discover Primary Services by UUID command handler
to the tester. It allows to test if GATT Client can perform discovery
of primary services based on known service UUID.
Change-Id: If5788c6f23481c7b4af85834bf8b113a97a4b66d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Needed headroom depends on type of the UART driver, change it
accordingly.
Change-Id: Ic9bf5f08a49be6823fce5eff8139d5f949b313ca
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Include expected opcode to print together with received opcode.
Change-Id: Iacc73c12f22fe0585e2753d709646bacd3e73d32
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
We use fiber_delayed_start() for starting delayed fiber. Make use of
fiber_delayed_start_cancel() instead of
fiber_fiber_delayed_start_cancel().
Change-Id: I2399290496ed2a2b21b2a780d884881839f36767
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds implementation of passkey entry command in tester
application.
Change-Id: I0624ee9f899102284490a82f5bb0a68bb342640a
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This adds implementation of pair command in tester application.
Change-Id: I55545bdf99e2828c17ec716069e925940f15d019
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This adds implementation of setting io capabilities command in tester
application.
Change-Id: I21ae68633fb74d78db6e5622e1ee518ef0eed632
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch adds stubs for SM commands defined in GAP.
Change-Id: I5aef256ade5a100eb0a582c5d9bd5eb8d01611f2
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch separates helper for converting address type to btp
specific.
Change-Id: Ied723e01f5548b10e063a6771f8824c0c35b4682
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch removes redundant tester_rsp_full public function with
wrapped tester_send function.
Change-Id: Iba517ed194e02045ca952b00b952c7608592fbbd
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
BTP Client received success response from the tester application too early,
so that next command was blocked due to pending ATT Request
Change-Id: I598c0e9e90984cac07f8b4ea265b0d6d69d3d18d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Szymon Janc