The HAS_SYSMPU option is just selecting NXP_MPU option,
which could be also controlled through menuconfig.
This commit removes the HAS_SYSMPU option and replaces
its usage by NXP_MPU option.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The ARM_MPU_IMX_RT option is just selecting ARM_MPU option,
which could be also controlled through menuconfig.
This commit removes the ARM_MPU_IMX_RT option and replaces
its usage by ARM_MPU option.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The ARM_MPU_NRF52X option is just selecting ARM_MPU option,
which could be also controlled through menuconfig.
This commit removes the ARM_MPU_NRF52X option and replaces
its usage by ARM_MPU option.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The ARM_MPU_ENABLE option is just selecting ARM_MPU option,
which could be also controlled through menuconfig.
This commit removes the ARM_MPU_ENABLE option and replaces
its usage by ARM_MPU option.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The STM32_ARM_MPU_ENABLE option is just selecting ARM_MPU option,
which could be also controlled through menuconfig.
This commit removes the STM32_ARM_MPU_ENABLE option and replaces
its usage by ARM_MPU option.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
If user enables VLAN support, then the sample application will
create two extra VLAN network interfaces for testing purposes.
The application can be compiled like this for VLAN support:
cmake -DBOARD=qemu_x86 -DOVERLAY_CONFIG=overlay-vlan.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for VLANs which are disabled by default.
The application can be configured to use the VLANs by setting
the IP addresses properly in config file. The VLAN support in
this sample application is only meant for testing multiple network
interface handling.
The application can be compiled like this for VLAN support:
cmake -DBOARD=qemu_x86 -DOVERLAY_CONFIG=overlay-vlan.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for VLANs which are disabled by default.
The application can be configured to use the VLANs by setting
the IP addresses properly in config file. The VLAN support in
this sample application is only meant for testing multiple network
interface handling.
The application can be compiled like this for VLAN support:
cmake -DBOARD=qemu_x86 -DOVERLAY_CONFIG=overlay-vlan.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user enables VLAN support, then the sample application will
create two extra VLAN network interfaces for testing purposes.
The application can be compiled like this for VLAN support:
cmake -DBOARD=qemu_x86 -DOVERLAY_CONFIG=overlay-vlan.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the destination address to select the proper network interface
when binding. The default network interface cannot be used here
as then the packet might be sent to wrong network interface.
Fixes#9935
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The current method relies heavily on the linker/compiler to
do the correct operation. Which is to eliminate the code that will
never get called. This posses a problem if the build even changes
by a smallest fraction.
The current patch will enforce proper inclusion of the code at the
pre-processing stage. Thereby not relying on the compiler/linker to
do the right thing.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
There are GPIO controllers that can control more than 32 pins.
The pin_mask is no longer adequate in this case. This wraps
the pin_mask in a union together with a field named 'pin'.
The driver is responsible for choosing whether to use
pin_mask or pin.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Sets the HPET timer frequency (enabled by default) to 19.2MHz.
And also sets the local APIC timer frequencies according to
the SoC variant.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are currently three SoC variants for the UP Squared board:
Pentium, Celeron and Atom. This adds a board option to specify
for which variant is being built.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This re-applies a patch that was merged in pr #6989, but then
accidentally reverted in a bad merge conflict resolution in pr #6842.
The actual behaviour of CONIG_FP_SOFTABI has not been matching the
documenation. The Kconfig documentation states that floating point
instructions should be generated, but this Kconfig option has been
turning off floating point instructions instead.
This commit causes floating point instructions to be generated when
CONFIG_FP_SOFTABI is enabled, as was originally intended and
documented.
This commit can cause regressions if users have been relying on the
actual behaviour instead of the documented behaviour.
Kconfig documentation:
config FP_SOFTABI
help
This option selects the Floating point ABI in which hardware
floating point instructions are generated but soft-float calling
conventions.
GCC documentation:
Specifying ‘soft’ causes GCC to generate output containing library
calls for floating-point operations. ‘softfp’ allows the generation of
code using hardware floating-point instructions, but still uses the
soft-float calling conventions. ‘hard’ allows generation of
floating-point instructions and uses FPU-specific calling conventions.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Extended shell to support wildcard characters: * and ? and expand
commands accordingly.
Increased default stack size.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Library will be used by new shell implementation.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Added commands for getting current status and controlling which log
messages are forwared to available backends.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
New shell support features like:
- multi-instance
- command tree
- static and dynamic commands
- multiline
- help print function
- smart tab (autocompletion)
- meta-keys
- history, wildcards etc.
- generic transport (initially, uart present)
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The drivers/pinmux/dev directory doesn't containe any CMakeLists.txt
file, preventing to enable the PINMUX_DEV option. Fix that by providing
one.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
'use-prop-name' is not documented.
Update dts/bindings/device_node.yaml.template to fix this.
Document that 'type' attribute is not used.
Fixes#9971
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The spi project configuration was incorrectly enabling i2c, which causes
a cmake failure if a board supports spi but not i2c. Found by CI when
adding spi support to the mimxrt1050_evk board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables an instance of the lpspi peripheral, configures the pinmuxes,
and updates the board documentation accordingly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Introduces a new mcux lpspi shim driver to be used on the imxrt soc.
This shim driver leverages heavily from the mcux dspi shim driver
because the MCUXpresso SDK provides similar APIs for the lpspi and dspi
peripherals.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add support for nRF boards by using the software-based PWM driver. The
prescaler has to be configured so that the clock runs slower in order to
make the on-board LED blink in the way it is described in the Readme.
Signed-off-by: Johannes Hutter <johannes@proglove.de>
The __reset vector is using the 'b' instruction to jump to _PrepC. 'b'
can only jump 2KB on Cortex-M0 platforms so this causes build failures
when _PrepC happens to be too far away from __reset.
To resolve this we use 'bl' instead as it can jump two thousand times
further[0].
This can also be resolved by porting the reset vector to C or by
placing the _PrepC function in a dedicated section that the linker
places next to __reset.
[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0489e/Cihfddaf.html
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
A confusing warning has popped up since 3.13. It can be observed as
so:
Zephyr version: 1.13.99
Parsing Kconfig tree in /home/sebo/zephyr/Kconfig
Merging /home/sebo/zephyr/samples/hello_world/prj.conf
warning: tag 'zephyr-v1.13.0' is really 'v1.13.0' here
-- Generating zephyr/include/generated/generated_dts_board.h
This warning is more confusing than useful so we suppress stderr from
'git describe' when the command runs successfully.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add a new command in the shell which can be used to set the channel
map by specifying a 37 bit bitmask written as a five byte hex array.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add functionality for setting the host channel classification in
the controller using the HCI command.
This closes issue #9851
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fixes the indentation for some code blocks and notes
through the "getting started" instructions.
The main effect is that an ordered list
is no longer broken by a note block.
Signed-off-by: Iván Sánchez Ortega <ivan@sanchezortega.es>
CI is failing sporadically with a corrupted
ToolchainCapabilityDatabase.cmake file.
To gain insight into how the file is corrupted we print it to the log.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
When running combined build on nRF5 with disabled VS command it is
possible to simply read static random address from FICR in host.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Piotr Zięcik