usb mass example need usb_dc_ep_read_wait/continue API.
test usb mass storage with RAM DISK on stm32f4 series.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Its possible we have dashes in interrupt names that we need to convert
to underscores when we generate defines. Make sure we do that otherwise
things aren't going to build.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixed implementation to disallow setting Bluetooth device
address under active advertising or scanning states.
Fixes LL.TS.5.0.2 conformance tests:
LL/CON/INI/BV-01-C [Connection Initiation]
LL/SEC/ADV/BV-01-C [Advertising With Static Address]
LL/SEC/SCN/BV-01-C [Random Address Scanning]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The following drivers are in the process of support getting their I2C
name, bus, address params from device tree. However if a given board
that supports device tree doesn't have one of these sensors we can't
build it.
To address this we add a dummy dts.fixup at the application level with
provides values for the defines we'd normally get from the dts
generation.
Fixes: #5722
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move to use an if HAS_DTS_I2C_DEVICE instead of depends on so that the
Kconfig sybmols don't even show up if HAS_DTS_I2C_DEVICE is true.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Conditionally compiled changes to the NRF52 HAL so it can
run on simulated HW on the native port.
(HW models are not included in this commit)
All changes are under ifdefs and therefore will not have any
effect on normal builds
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
De-referencing the pointer from net_buf_user_data(buf) as a pointer to
an enum causes issues on qemu_x86 because the true size is 8-bit, but
the enum is 32-bit on qemu_x86. So we put in a temporary cast to 8-bit
to ensure only 8 bits are read from the pointer.
This fixes a regression from d3304dc508
that broke BT on qemu_x86.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
When the ZEPHYR_GCC_VARIANT-variable is not set properly no
message is printed, whereas this small change will help users
to easier understand why things are not working. Here: they forgot
to set an ENV-variable.
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
This documentation is needed for developers who are porting new boards.
Fixing #5577
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Refactor mayfly based execution context solution out into
the HAL folder. This opens up the possibility to use
tasklets (if and when kernel gets the support) style
execution contexts.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Removed CONFIG_FLASH_PAGE_LAYOUT because it is already selected
by NFFS kconfig itself. Some other keywords were duplicated.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
CONF_FILE was overwritten by boilerplate.cmake so not proper
settings were took for tests. NRF5 flash driver had changed
its name to one defined by DT (see #5773) - which causes
incompatibility witch previous settings.
This patch solves this problems.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Applies to #4008 and #5159 for this board. Problem is that the
button interrupt callback was only firing once. Solution is to
set the pin pull up flag to GPIO_PUD_PULL_UP.
Signed-off-by: Anders Pitman <tapitman11@gmail.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Some boards do not generate .bin files by default, this file is however
needed when generating ram/rom reports, so in case it is not present,
create it.
Fixes#5784
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The old HAL and MDK have been removed from the source tree.
Since RADIO HAL is not yet present in nrfx, the "nrf_radio.h" file
was temporarily moved to "nrfx/hal" folder. It will be replaced with
the proper file from nrfx in its next update.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit adds a glue layer that adapts nrfx to be usable in Zephyr
as a host environment and files with static configuration of nrfx
drivers for several supported SoCs.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
nrfx is an extract from the nRF5 SDK that contains solely the drivers
for peripherals present in Nordic SoCs, for convenience complemented
with the MDK package containing required structures and bitfields
definitions, startup files etc.
Origin: nrfx
License: BSD 3-Clause
URL: https://github.com/NordicSemiconductor/nrfx/tree/v0.8.0
commit: b7cfe970b45ad7cc9c36b62ee620508e9e2c7fb5
Purpose: Provide peripheral drivers for Nordic SoCs
Maintained-by: External
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add a simple UDP server application that will receive UDP data
and print various statistics like number of packets received and
dropped, amount of bytes received, and how many packets / sec
we were able to receive.
Currently the sample only provides a config file for FRDM-K64F board.
Note that this sample should not be run in QEMU as the performance
is very bad there because of SLIP link between Linux host and QEMU.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The GPIO unit on the SAM0 is called 'PORT' which conflicts with the
name used in this sample. Rename to LED_PORT instead.
Signed-off-by: Michael Hope <mlhx@google.com>
This moves and merges the existing board-level dts.fixup files
for STM32 L4 SOC family into one soc family level dts.fixup file.
No new fixup blocks have been added, only fixup blocks, that were
part of at least one board level dts.fixup file are present in
soc family level dts.fixup file.
disco_l475_iot1 boards fixup blocks for devices connected via SPI
and I2C stay in board level dts.fixup file, because they are board
specific.
Contributes to #5707
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
This moves and merges the existing board-level dts.fixup files
for STM32 F3 SOC family into one soc family level dts.fixup file.
No new fixup blocks have been added, only fixup blocks, that were
part of at least one board level dts.fixup file are present in
soc family level dts.fixup file.
Contributes to #5707
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
This moves and merges the existing board-level dts.fixup files
for STM32 F1 SOC family into one soc family level dts.fixup file.
No new fixup blocks have been added, only fixup blocks, that were
part of at least one board level dts.fixup file are present in
soc family level dts.fixup file.
Contributes to #5707
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
This moves and merges the existing board-level dts.fixup files
for STM32 F4 SOC family into one soc family level dts.fixup file.
No new fixup blocks have been added, only fixup blocks, that were
part of at least one board level dts.fixup file are present in
soc family level dts.fixup file.
96b_carbon boards fixup block for Bluetooth HCI device via SPI
stays in board level dts.fixup file, because it is board specific.
Contributes to #5707
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
This moves and merges the existing board-level dts.fixup files
for STM32 F0 SOC family into one soc family level dts.fixup file.
No new fixup blocks have been added, only fixup blocks, that were
part of at least one board level dts.fixup file are present in
soc family level dts.fixup file.
Contributes to #5707
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
Convert Atmel SAM0 flash driver to use device tree to get the flash
controller name and base address.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Changed the default behavior for when we run sanitycheck to match the -R
flag that turns on assertions. Introduced a --disable-asserts option if
we desire to explicitly turn of asserts.
This matches behavior that our CI builds have been doing and addresses
part of #5726.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We allow the application to have its own dts.fixup. The main use for
this right now is for the build all test to define dummy values for
defines we expect to be generated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adds pinmux defines to use I2C2 at PB10/PB11 for
stm32f0-based boards.
Needed for stm32f072b_disco board to use extension
connector
Signed-off-by: Daniel Wagenknecht <wagenknecht@clage.de>
Fixes a bug where in Connection Parameter Request was
initiated by slave role while Encryption Setup had been
started by the peer master.
Fixes: #5823
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This patch reworked logging so that the logging levels are more
finely graded and the locations with non-critical error handling
(below usb_ep_set_stall's) are logged with SYS_LOG_WRN.
Also cleanup, add log domain and fix indents.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
For SoCs that don't support vector table relocation in hardware, may not
support bootloader like mcuboot.
We introduce a way to relocate vector table in software by forwarding
the control of incoming IRQs to a new vector table which address is save
at fixed SRAM address.
User can change the data in that fixed SRAM address in order to relocate
vector table in software way.
Signed-off-by: Ding Tao <miyatsu@qq.com>
Cortex-M0 do not have the Vector Table Base Address Offset Register, so
Cortex-M0 vector table address can not be changed.
But in some Cortex-M0 SoCs like STM32F0 series, they have some mechanism
that can remap the vector table address to the start address of SRAM.
Use this flag to indicates whether current Cortex-M0 SoC support such a
remap or not.
Signed-off-by: Ding Tao <miyatsu@qq.com>
We want to move to use a common FLASH_DEV_NAME across the various flash
drivers. So samples, tests, or other code can be a bit more generic. So
replace CONFIG_SOC_FLASH_NRF5_DEV_NAME with FLASH_DEV_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove SoCs part dependency of CLOCK_STM32_PLL_PREDIV1 config since
it will only be used on parts having an HSE oscillator, ignored
otherwise.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Rename some legacy upstream and downstream interfaces in
radio_* namespace to ll_* namespace for consistency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduce flash controller nodes for STM32 SoCs that are supported in
the flash driver. This is a precusor to converting the flash driver on
stm32 over to using device tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In order to be able to build MCUboot for nRF51 we require the flash
driver name in the nRF51 soc.h header.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
qianfan Zhao