Add the st,static-prescaler DTS property to the
stm32u5 family on the LPTIM1.
Also present on lptim3, 4 but not defined yet.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The stm32 devices shows a x2 factor on the LPTIM1,3,4
clock source but it acts as a prescaler.
The max lptim counter (timebase) is counting 4 sec
In that case, the LPTIM count unit is double.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add a st,static-prescaler optional property to DTS
of the stm32 where the LPTIM has a x2 factor on
its clock input.
This property is present or not depending on the stm32.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Expands kconfigfunctions to include checks for value existence in
an array property by nodelabel, or a chosen's boolean prop value.
Signed-off-by: Stephen Stauts <stephen.stauts@nordicsemi.no>
A variable was defined directly after a label in two case statements,
resulting in build warning with certain compilers.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
arch_dcache_range() function does not exist anymore, nor K_CACHE_WB
macro. Removing it entirely.
arch_dcache_flush_range() signature changed, so relevantly applying
these.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fixes two issues with the JIT scheduler:
Rescheduling of primary advertising packets for extended advertising
when using the JIT scheduler did not work, since the done events for
the primary events never made it into the reschedule logic
The EVENT_DONE_EXTRA_TYPE_ADV_AUX event (for auxillary packets) could
cause a "reschedule" for a primary event that was actually sent
successfully (causing it to be sent twice)
Signed-off-by: Troels Nilsson <trnn@demant.com>
Because posix emulated execution is significantly faster than posix
emulated timer and benchmark finishes before even the first tick occurs.
Signed-off-by: Alp Sayin <alp.sayin@amd.com>
Needed because benchmark finishes faster than a tick, especially on
emulated platforms where tick rate is 100Hz. Output units are also updated
to print numbers with less digits.
Signed-off-by: Alp Sayin <alp.sayin@amd.com>
Stack sizes need to be dependent on something arch specific such as
idle stack size because they're smashing their stacks.
Signed-off-by: Alp Sayin <alp.sayin@amd.com>
This prevents a configuration error by selecting the console if
the UART MCUmgr transport is used, which is actually a dependency
for this transport.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Update sdmmc framework to use sdmmc_wait_ready when accessing card in
SPI mode. this will allow cards that do not return to ready to be polled
for busy status until the SD data timeout expires
Fixes#52931
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Recently introduced MISRA-C CI check complains about use of a duplicte
tag, so, shorten the variable from shell->sh to avoid same name as the
structure.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Will be replaced by APIs:
- openthread_state_changed_cb_register
- openthread_state_changed_cb_unregister
Signed-off-by: Nick Ward <nick.ward@ftpsolutions.com.au>
Add a new callback list structure for state change information.
These APIs are meant to eventually replace the single callback API
provided by openthread_set_state_changed_cb().
This will allow multiple users to gain information about
OpenThread stage changes.
Note CONFIG_OPENTHREAD_MAX_STATECHANGE_HANDLERS
with OpenThread's otSetStateChangedCallback() API can also be
used to enable registration of multiple callbacks of this type but this
cannot be modified if a certified OpenThread binary is used in the
build.
Signed-off-by: Nick Ward <nick.ward@ftpsolutions.com.au>
Disables having USB enabled for boards that configure USB CDC for
console, shell or logging at bootup in applications that enable USB
to prevent a conflict arising whereby USB is registered from
multiple points and later calls fail.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
There is no need to block the thread for a second.
Let it sleep for 100 milliseconds, which should be enough
to set the host baud rate.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
USB_TRANS_NO_ZLP flag has no meaning for usb_transfer() in
host-to-device direction (USB_TRANS_READ).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
audio_iso.c should only be compiled if we require any streams,
so it is now guarded by CONFIG_BT_AUDIO_STREAM.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
warning: format '%d' expects argument of type 'int', but argument 3
has type 'size_' {aka 'long unsigned int'} [-Wformat=]
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
During flash operation, you have to disable XiP which force function
to be located in RAM. On top of that, the function `flash_put_cmd_addr`
is time critical so we need to declare as inline. For some reason,
sometimes the function was not really inline. Changed it to
ALWAYS_INLINE fixed the bug.
Signed-off-by: Mathis Raemy <mathis.raemy@gmail.com>
After several fixes of the re-ordering logic in TCP, the receive queue
works as intended and cleans itself up properly. Previously the default
timeout was 100 ms, which pretty much disables it for real applications.
Increase the timeout to 2 seconds to actually enable it for in practice.
This should help pass much more of the Maxwell Pro tests.
This is the first step before removing the timeout completely.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
This removes the tinycbor module and replaces references in it
e.g. in sample text to use the zcbor replacement.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
In case that CONFIG_BT_AUDIO_UNICAST_CLIENT_ASE_SNK_COUNT or
CONFIG_BT_AUDIO_UNICAST_CLIENT_ASE_SRC_COUNT is set to NULL, the
unicast client implementation in the shell would have compile
warnings, since the arrays would be 0 and we would attempt to
access it some places (or rather the compiler/linker would
think that, but it would never happen at runtime).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The stm32l562e_dk and b_u585i_iot02a boards have same external NOR
memory. This harmonize both definitions and fix total partition size
to correct 64MB.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Array 'days_in_month' of size 12 may use index value bigger then
count of its elements.
Signed-off-by: PawelX Dobrowolski <pawelx.dobrowolski@intel.com>
Add IS_BIT_MASK() macro for determining whether a value is set bits
continuously from the LSB.
This macro is not dependent on bit-width and works in contrast to
BIT_MASK() and BIT64_MASK().
IS_SHIFTED_BIT_MASK() is a version of IS_BIT_MASK() that allows setting
the start bit of continuous bits.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Changes one of the callback register/unregister functions to use
2 events OR'd together instead of 2 events registered separately,
this is to help test that grouped events are working.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Joakim Andersson