So that for both the simulated nrf5340 and real HW nrf5340dk
we build both network and application core images.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
So that for both the simulated nrf5340 and real HW nrf5340dk
we build both network and application core images.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add support for the simulated nrf5340 and nrf52 in these samples.
And enable building in twister both for these and for the
already supported nrf5340dk.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Maxim MAX20335 is a PMIC with Ultra-Low IQ Voltage Regulators and
Battery Chargers for Small Lithium Ion Systems.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Tomasz is actively involved in Zephyr's ACPI support, so add him as a
collaborator to the subsystem.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
axp192 is used by the display controller and gpio hog subsys
thus we need to set this priority to the smaller value.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Add basic ACPI test application. Initially there are only tests for one
ACPI table (MCFG) and fetching the ACPI PRT, but this is already a good
start for caching regressions on the supported boards.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This test assumes it can use all configured
NRF_RTC_TIMER_USER_CHAN_COUNT,
But the sync RTC code uses one while it synchronizes.
Let's just disable it the sync rtc.
This fixes an issue where the test fails for a simulated
nrf5340.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The workqueue test may intermittently fail, with errors such as:
work_1cpu_test_1cpu_system_schedule: (elapsed_ms <= max_ms is false)
long 102 > 101
Disabling PM makes the issues go away, and it is what this patch does.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Instead of those set, use the default ones
for the MFD/REGULATOR_AXP192_INIT_PRIORITY/GPIO_AXP192_INIT_PRIORITY
that are set to the 80/86/81 values correctly. Adjust the
GPIO_HOGS_INIT_PRIORITY only to be executed after GPIO driver.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Save secondary dsp context when it is powered off in idle thread
and restore it when the secondary dsp is powered up. The algorithm
is aligned with ace platform.
Tested on a tgl platform.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Improves the documentation about how CDP 128, 129 and 130, as well as
Models Metadata Page 128 are created, as well as which functions the
application will have to call to store the correct contents in the
pages.
Signed-off-by: Ludvig Jordet <ludvig.jordet@nordicsemi.no>
Adds a note that an additional Kconfig needs to be selected if a
serial MCUmgr transport is used
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Settings which defaults to `y` but is architecture related should have
a arch dependency for safety reasons.
Thefore add `if SPARC` to the SPARC_CASA Kconfig to ensure this setting
is only enabled on the sparc arch.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fix a bug on cavs platform that secondary core is not powered off
by SET_DX ipc message sometimes. Secondary core is set into idle
state when switching to SOF_OFF state and then halted by primary
core. The interrupt is enabled before entring idle state, so the
secondary core may be woken up by interrupt and soc_cpus_active
is set to true before it is halted by hardware power gating. This
result to error when SOF check soc_cpus_active after the secondary
is halted.
This patch doesn't enable interrupt before idle entry to avoid above issue.
Signed-off-by: Rander Wang <rander.wang@intel.com>
When both the memory base address & its size are zero, the
assertions test will be comparing an unsigned int against zero
which result in compilation warning, and will be raised to
error in Twister
Fix them with more conditional compilations.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Fix build for IMXRT11xx SOCs. The ARM MPU header was missing for the CM4
board overlays, add the required header so the sample can build.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Locate common mpu code together with other arm / nxp mpu code in the
arch folder where it logically belongs.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The pca9685 driver assumes the chip will be in "restart" mode
after putting it to sleep. This is not necessarily the case, which
can cause setting the prescaler to fail.
This fix allows the precaler to always be set and only restart the pwm's
when the chip was actually in restart mode after being put to sleep.
Signed-off-by: Jaap Versteegh <j.r.versteegh@gmail.com>
Fix MCUBoot error for LPC55S69 "slots are not compatible".
Use the standard slot naming,
used by TFM-enabled Zephyr platforms.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Added chat script and initial config to support Telit ME910G1.
Needed to edit power_pulse pin timing in accordance to datasheet.
Signed-off-by: Jeff Welder <Jeff.Welder@ellenbytech.com>
This is a partial revert of one-line from commit 06cfbd4159 ("drivers:
power_domain: Introduce a gpio monitor driver") which not just
introduced a new driver (no problem with that) but also changed the
initialization priority of another, unrelated and existing power domain
driver without even trying to compile it:
https://github.com/zephyrproject-rtos/zephyr/pull/61166#issuecomment-1780959157
```
west config manifest.project-filter -- +sof
west update
west build -b intel_adsp_ace20_lnl modules/audio/sof/app/
ERROR: /soc/ssp@28100 POST_KERNEL 43 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@29100 POST_KERNEL 44 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@2a100 POST_KERNEL 45 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@2b100 POST_KERNEL 46 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@2c100 POST_KERNEL 47 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@2d100 POST_KERNEL 48 < /soc/dfpmccu@71b00/io0_domain 51
```
Also note a reviewer (@ceolin) expressed concerns about this unrelated
change but it was ignored:
https://github.com/zephyrproject-rtos/zephyr/pull/61166#discussion_r1357908984
Using `CONFIG_KERNEL_INIT_PRIORITY_DEFAULT` here may be "bad" for some
reason(s) and maybe it should be changed in the future, but it's nothing
compared to breaking _compilation_ of code that has been validated for
months and been released in production
(https://github.com/thesofproject/sof-bin/releases/tag/v2023.09)
So the very urgent thing is to very quickly revert to the previous state
to unblock development. Then we can discuss what is the better thing to
do here.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Portfolio object created string buffers for Identity resources
that was overlapping on some cases.
Don't calculate pointers by hand, allow compiler to calculate it.
Fixes#64634
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Extend the previous support of creating object instances by allowing
creation of resource instances as well.
Similarly, add support for deleting.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The existing driver and sample:
- drivers/bluetooth/hci/rpmsg
- samples/bluetooth/hci_rpmsg
are no longer correctly named, since they now use the IPC subsystem to
send and receive data. The IPC subsystem can use RPMsg as a transport,
but that is one of several selectable backends.
I initially wanted to deprecated both the BT_RPMSG Kconfig option as
well as the zephyr,bt-hci-rpmsg-ipc chosen node in Devicetree. However,
this proved to be undoable in the case of the Kconfig option. This is
because it's a choice option, and those have special behavior. In
particular, the only practical way to deprecate would've been to keep
the old Kconfig option outside the choice (much like it's done in this
commit) but then also add a 'depends on !BT_RPMSG' on each of the
remaining choice symbols *except* on the new BT_HCI_IPC one. This, however,
only works correctly for .conf files. If a board instead sets the
default BT_HCI_BUS_TYPE in the Kconfig.defconfig file then the Kconfig
tree parsing would fail, because it'd try to set it to a value
(BT_RPMSG) that is no longer part of the choice.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
it8xxx2 uses a custom linker script, which was not updated on
dfb3674c4c. This patch naively updates it
to support DEVNULL_REGION.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
The mcumgr SMP UDP configs struct was causing a unique tag name
violation (rule 5.7).
The struct name has been changed from configs to smp_udp_configs.
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
mcumgr's SMP UDP transport was unnecessarily using a potentially large
amount of ROM space due to static initialising fields in a
config struct that also contains buffers/stacks.
This has been changed to instead initialise fields in the start
function, reducing ROM usage by ~5K in the default configuration
with IPv4 and IPv6 enabled.
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
Mark .noinit section as NOLOAD and move it
next to the other NOLOAD sections. This way
it is removed from a generated image that is
embedded in the rt595 app image.
Signed-off-by: Mike J. Chen <mjchen@google.com>
Implementation of PM in the driver requires PM to be enabled. This was
enabled in the SoC until now and was recently removed.
Fixes#64608
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix examples for HEAP_LISTENER_ALLOC_DEFINE()
and HEAP_LISTENER_FREE_DEFINE().
Delete misused input heap_id variable.
It caused incorrect log output.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Unify spelling of CAN Flexible Data-rate abbreviation to "CAN FD" instead
of "CAN-FD". The former aligns with the CAN in Automation (CiA)
recommendation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Define the storage_partition in the internal flash
instead of the external NOR qspi flash,
so the testcase can PASS on the disco_l4754_iot1 board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Alberto Escolar Piedras