Static variables that don't strictly need to be initialized at
boottime should be declared with __noinit. This makes a considerable
difference especially for large buffers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a testcase.yaml configuration to spi_loopback test to include
it into sanitycheck.
Fixes#4576
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
This restores the board specific configurations that were present
before moving the test to using KConfig.
<board>.conf files from boards subdirectory get merged with
prj_base.conf file.
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
Convert this test to using KConfig instead of conditional compilation.
Standard configuration is provided by prj_base.conf and KConfig
default values.
Remove prj_<board>.conf files.
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
The old ARMV6_M Kconfig option has been removed, and so to correctly set
the dependencies for SW_VECTOR_RELAY we need to use the new
ARMV6_M_ARMV8_M_BASELINE.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In the case of an unexpected PDU we need to send the right response.
This was already taken care of for PB-ADV, but not for PB-GATT.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Provisioner might have missed our earlier Link Acknowledgement, so
if we receive another one with matching Link ID and link.expect state,
simply send another acknowledgement.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When sending a segmented message, the state could get stuck if the
advertising bearer fails in transmitting and we don't detect that it
happened. Add a send_start callback for all packets so we can always
know if sending fails.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When both PB-ADV and PB-GATT are enabled, the PB-ADV code (prov.c)
uses the bt_mesh_proxy_get_buf() API to get a net_buf_simple buffer.
Unfortunately this function also suffers from the same issue that was
fixed by commit 2b273444c1.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In net_app_init_client(), the remote port is set after an initial
set of checks based on the remote_addr's assigned family.
However, if the peer_addr_str is a host name which needs to be
resolved via DNS, the family won't be set yet, and the port is
left as 0.
To fix this behavior let's move the port assignment after the
DNS lookup section to be sure that the remote sa_family is set.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
As discovered in https://github.com/zephyrproject-rtos/zephyr/issues/5952
...a duplicate call to k_delayed_work_submit_to_queue() on a work item
whose timeout had expired but which had not yet executed (i.e. it was
pending in the queue for the active work queue thread) would fail,
because the cancellation step wouldn't clear the PENDING bit, causing
the resubmission to see the object in an invalid state. Trivially
fixed by adding a bit clear.
It also turns out that the behavior of the code doesn't match the
docs, which state that a PENDING work item is not supposed to be
cancelled at all. Fix the docs to remove that.
And on yet further review, it turns out that there's no way to make a
test like the one in the linked bug threadsafe. The work queue does
no synchronization by design, so if the user code does no external
synchronization it might very well clobber the running handler. Added
a sentence to the docs to reflect this gotcha.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Courtesy of thomsten on IRC, add a link to a handy RTT viewer written in
Python and cross-platform.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Describe how to disable the UART console to avoid unexpected
redirections that will prevent the console output to go through RTT.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove unused _k_thread_single_start() as this logic is
now moved to _impl_k_thread_start().
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This patch fixes a hole in the stack guard configuration. The initial
branch to main is missing the stack guard configuration.
Fixes: Issue #3718
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds documentation on the design and implementation of stack
objects for architectures which utilize MPU backed stack and memory
protection.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch fixes calculations for the top of the interrupt and main
stacks. Due to power of two alignment requirements for certain MPUs,
the guard size must be taken into account due to the guard being
counted against the initial stack size.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adjusts the calculation of the overflow size for the kernel
stack tests which read/write to areas below the current user stack.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support for userspace on ARM architectures. Arch
specific calls for transitioning threads to user mode, system calls,
and associated handlers.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds a configure_mpu_user_context API and implements
the required function placeholders in the NXP and ARM MPU files.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the STM32 ccm_bss, ccm_noinit, abd ccm_data sections
to the list of allowed sections so the sanity check passes.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
Configure ccm size and address via dts. According to the DT
specification, the unit-address of a node must match the
first address specified in the reg property of the node.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
The STM32 has special Core Coupled Memory, ccm for short, that can
only be accessed through the CPU and can not be use for DMA.
The following 3 sections have been added.
- ccm_bss for zero initialized data
- ccm_data for initialized data
- ccm_noinit for uninitialized data
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
Allow for any toolchain variants to be useable with sanitycheck without
the need for them to be registered.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move toolchain definitions into toolchain/ and move compilers to
compilers/
Usage of toolchain- for everything was confusing, there are the actual
compiler related definitions and there is the toolchain/SDK related
configs, so keeping them separate helps understand the different and
prevents confusion.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We want to support other toolchain not based on GCC, so the variable is
confusing, use ZEPHYR_TOOLCHAIN_VARIANT instead.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When we added system call support to dma_start/dma_stop we forgot to
include <syscalls/dma.h> to get the full proper magic implemented.
Adding the header in fixes builds when system call support is not
enabled and using dma support.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Difference being that the data is not, then, allocated from the pool.
Only the net_buf is.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
bt_gatt_discover_params parameter shall remain valid as long as the
procedure is in place.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The conversion to the new net_buf_simple API was done incorrectly
here. The buffer initialization should use net_buf_simple_init()
instead of net_buf_simple_reset(), so that buf->__buf gets properly
initialized (and not left pointing at NULL).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's a risk of a deadlock if we use the same pool for ACL fragments
as we use for general ACL TX buffers: all TX buffers are queued up,
and we try to segment one of them, a segment buffer will never become
available. To work around this risk, introduce a dedicated fragment
pool.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Refactor ticker execution context dependency out into HAL
folder. This decouples ticker from mayfly, enabling porting
towards a more tasklet (if and when kernel gets the support)
style execution contexts type implementation support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Convert the mesh code to use the new net_buf_siple APIs. This has the
benefit of saving 4 bytes off the stack due to the not needed pointer.
Also update the publication context helpers to map to the new
net_buf_simple API in an intuitive way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If context is bound to IPv6 unspecified addresss and some port
number, then unspecified address is passed in TCP reset packet
message preparation. Eventually packet dropped at the peer.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Zephyr doesn't have luxury to create re-transmit timer per packet. So
it has different methods to handle packets in queue. But re-sending
packets on valid ack messages causing issues.
E.g. A TCP node sent two packets (packet-1, packet-2). Peer replied
two ACKs (ACK-1 and ACK-2), and these two ACK's are at rx_thread
queue. Now ACK-1 is handled and reference of packet-1 is freed
from sent list. Then if condiftion (valid ACK and connection
state is ESTABLISHED) notices that, sent list is not empty.
Restart the timer, modify sent flag and resend packets in a
list. Here packet-2 is sent again, even though ACK-2 is already
received. Situation is worse if there are more packets in the
list.
So only start the re-transmit timer in-case queue is not empty. It
allows rx_thread to handle all incoming packets (in this e.g ACKs).
When the re-trasmit timer expires, it sends the packets which
are left in queue.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In case of failed to get source address from the net packet,
release the assgined tcp backlog entry. Otherwise it will
never be freed.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
k_delayed_work_cancel(&context->tcp->fin_timer) called twice
immediately one after other.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Application should normally declare a bt_uuid with proper type and then
use bt_uuid_cmp.
Fixes#5162
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
RFC 7252, sec 4.8 [https://tools.ietf.org/html/rfc7252#section-4.8]
The default MAX_RETRANSMIT is 4, current implementation only
retry 3 times. Update next_timeout() to return one more retry.
Also, add a TODO for random generated initial ACK timeout
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Two docs listed in the Samples an Demos TOC had the same title displayed
in the board-specific samples section, "Power Management Demo". Give
both sample docs a more specific title.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The existing implementation assumed DNS resolv callback will be
called just once, but that's not always the case (apparently,
for multi-homes hosts or something). So, apply array bounds
checking (and do pointer arithmetic only after it, as the C
standard otherwise warns of "undefined behavior"). In such a case,
the port number wasn't set in each entry too, so rework how it's
done.
The issues discovered while resolving archive.ubuntu.com.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
As per current policy of requiring supervisor mode to register
callbacks, dma_config() is omitted.
A note added about checking the channel ID for start/stop, current
implementations already do this but best make it explicitly
documented.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Yannis Damigos