Improve the documentation of the ARMv8-M MPU convenience macros
for setting up MPU regions at boot time, stressing that the
macros intend to be used for non-overlapping, fixed MPU regions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit enhances the documentation of the mpu_config
element in include/arch/arm/cortex_m/mpu/arm_mpu.h, stressing
that it intends to store information for fixed MPU regions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove an inline explanatory comment for the thread
stack region type that is obsolete. The comment had
been been erroneously kept in after the enumeration
of MPU region types was refactored and cleaned up.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When the code partition is not at the beginning of the flash, the load
offset is wrongly computed. The address in the device tree is already
relative to the beginning of the parent node, ie the beginning of the
flash memory space. There is therefore no need to subtract it.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a section to optionally install the Chocolatey packages required to
build the documentation in .pdf format on Windows.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to make PDF generation work on Windows, search for a generic
Latex package and use full quotes for the latexmk environment variable.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This patch is equivalent to 7b0ce85242,
but applied to more boards. As stated in the previous commit message:
This change aims at fixing 'unit_address_vs_reg' warning in arm based
boards. This warning pops up when a node name is made up with an
address (node_name@xx) but does not contain a reg property. This case
was encountered for led nodes for instance, where a reg property has
no meaning. Fix this by changing node_name@xx to node_name_xx which
removes the guilty '@XX' syntax but preserves node_name uniqueness.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The node name parsing for the _LABEL #define does not parse the unique
node portion in the same fashion between @<unit_address> and _<number>.
This change normalizes the two modes.
Signed-off-by: David Leach <david.leach@nxp.com>
1. Command handler can return command exectution status as int.
2. Existing command handlers rework.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This PR fixes: #10195.
Function _vprintk when used cannot parse '*' what
a as result causes dereferencing bad pointer.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Adds getaddrinfo and freeaddrinfo to the offloaded API.
Signed-off-by: Joakim Andre Tønnesen <joakim.tonnesen@nordicsemi.no>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Every board that uses dts-enabled spi drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_SPI_PINS and
HAS_DTS_SPI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Every board that uses dts-enabled gpio drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_GPIO_DEVICE and
HAS_DTS_GPIO.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Every board that uses dts-enabled spi drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_SPI_DEVICE and
HAS_DTS_SPI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Every board that uses dts-enabled i2c drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_I2C_DEVICE and
HAS_DTS_I2C.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a board-specific dts overlay and fixup file to the arduino_101
environmental sensing sample, in preparation for making the sensor
drivers require dts.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Extending logger to support logging transient strings (with %s).
With dedicated call (log_strdup), string is duplicated to a buffer
from internal logger pool. Logger implicitly manages the pool.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Argonkey board building has been recently broken by a LSM6DSL sensor
driver fix (see commit: a013ce3bf0).
The board configuration file must now enable HAS_DTS_GPIO_DEVICE macro
instead of HAS_DTS_SPI_DEVICE.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
It is very inconvenient to maintain an application that both runs on a
Zephyr board and an out-of-tree board.
It forces one to write build scripts like this in the app:
if(BOARD STREQUAL my_out_of_tree_board)
set(BOARD_ROOT some/out/of/tree/board/path)
endif()
To avoid this we change the semantics of BOARD_ROOT. Instead of it
being a path to the board root it is now a prioritized list of board
root directories. Zephyr will append ZEPHYR_BASE to BOARD_ROOT.
This ensures that Zephyr boards can be used when the out-of-tree board
directory can not supply the requested board.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The documentation has been setting the environment variable
KERNELVERSION to the PROJECT_VERSION of the documentation. But
PROJECT_VERSION is not set during the documentation build so this has
no effect.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Change the format of KERNELVERSION as it exists in Kconfig to match
it's format elsewhere. Specifically, change from a string format
"1.10.3" to a numerical format.
This format change is a backwards-incompatible change. Any out-of-tree
Kconfig sources that were accessing KERNELVERSION with
$(KERNELVERSION) will need to be ported.
This change is to fix a bug. KERNELVERSION should have always been in
a numerical format. It should have been in a numerical format because;
KERNELVERSION is in a numerical format as a CMake variable and as a C
macro.
The purpose of having KERNELVERSION available in Kconfig is to have
configuration depend on the version, but this is only possible if it
exists in a numerical format[0].
[0] A string comparison of two semver strings does not always result
in a correct version comparison.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The last parameter is 'period', we should not pass duration twice.
Doing so makes zephyr hang with current mainline when it is chosen to be
the Grand Master.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Completely remove the last_sync_receipt_timeout time. It is not part of
the standard (see 802.1AS-2011, 10.2.11 for the complete list of
variables for this state machine). Additionally this extra variable was
never really initialized so the calculated duration made no sense.
Just start the timer based on the regular sync receipt timeout time
interval from the port data set.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This commits adds a possibility to select PTP clock accuracy through
KConfig.
The chosen accuracy should reflect the capabilities of the used
hardware.
See IEEE 1588-2008, chapter 7.6.2.5 for more details.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Implements GMCAP-1, GMCAP-2, and GMCAP-3 and their dependencies from
802.1AS-2011. See Annex A.10 for more details.
The Grand Master Capability can be turned on and off through KConfig.
Note: the correction field in FUP packets is not yet properly
calculated. There is a TODO left in the code, near which some parameters
are zeroed to make the correction field be set to 0. This mimics the
behavior of openAvnu (a Linux gPTP client). For full compliance the
field should be calculated and set properly.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Optimize memory usage of enums that are used within structs.
Reorganize the affected structs to avoid holes.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
SyncReceiptTime should use an ExtendedTimestamp (with fractional
nanoseconds precision). Add a struct with the definition of the needed
type and convert that variable.
The struct representing the ExtendedTimestamp is named
net_ptp_extended_time to keep consistency with the existing net_ptp_time
which is used for regular PTP timestamps.
See 802.1AS-2011 chapters 10.2.3.4 and 6.3.3.5 for more reference.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
There are other ClockMasterSync state-machines (to be implemented).
Current name would either cause conflicts or be too ambiguous.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This splits L2CAP commands under 'bt' to 'l2cap' removing 'l2cap-'
prefix from the commands:
l2cap - Bluetooth L2CAP shell commands
Options:
-h, --help :Show command help.
Subcommands:
connect :<psm>
disconnect :[none]
metrics :<value on, off>
recv :[delay (in miliseconds)
register :<psm> [sec_level]
send :<number of packets>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This splits BR/EDR command under 'bt' to 'br' to reduce the command
list and at same time cleaning the mix between different bearers.
In addition to that also remove "br-" prefix for the commands:
br - Bluetooth BR/EDR shell commands
Options:
-h, --help :Show command help.
Subcommands:
auth-pincode :<pincode>
connect :<address>
discovery :<value: on, off> [length: 1-48] [mode: limited]
iscan :<value: on, off>
l2cap-register :<psm>
oob :
pscan :value: on, off
sdp-find :<HFPAG>
rfcomm-register :<channel>
rfcomm-connect :<channel>
rfcomm-send :<number of packets>
rfcomm-disconnect :[none]
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
KCONFIG_AUTOHEADER is an environment variable that was used by the C
Kconfig tools to determine where the autconf.h file is. After the
migration to python this environment variable became unused.
This patch removes the deprecated env var.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Maureen Helm