Warning comes during compilation about missing prompt, this sets
the prompt for this SoC.
Change-Id: If8b422d6a870eb99c219ab872924875eb04fba0c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Static function was declared after it was used.
Change-Id: I7872d9aedef34d0e1e68e6475bea8afcd0496f69
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
All patches should have Signed-off-by line in commit message as
described in doc/collaboration/code/changes.rst.
Change-Id: Iba6bad47115fd5323a096fa58c2d0d8c5ec9db75
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use a default priority to avoid Kconfig blocking when priority
is not set in SoC or Board.
Change-Id: I4edda47b955a7ee834f04dc40d0decbd8dee6305
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample just prints 'Hello World', Nothing else.
Change-Id: I93af3fdc2de342e878bc038f937e7f1ad2231bd3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample is more than just a hello world, it demonstrates basic
kernel functionality that deserve to be its own sample.
A simplified Hello World sample will replace this one.
Change-Id: I9120daa1923f99def994e484783abe04db5b14eb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds a sample app to utilize the PWM on Arduino 101 via the pwm_dw
driver. Refer to the source file header for more information.
Change-Id: I0ad0f24242185b7b99e66445629d676ffde0bba3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds a driver to utilize the DesignWare timer IP block
to do PWM.
Change-Id: I11ba689350b664209ad2440e3001e57eb38fd982
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Change the terminology in the documentation and use board instead
of platform where applicable.
Change-Id: I812598e1948ee7df8739e5cc9029278e9e849c7f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is a generic Atom configuration that can be inherited by boards
with Atom SoC like the minnowboard.
Change-Id: I06ab999062be7811d14755fd34440dee8f8b81ed
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
No need for the same SoC configuration with different names. Use IA32
as the "SoC" for qemu_x86 "boards".
Change-Id: Iee00538701c5ece14d0c3df637b0aaa54790f0e2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use a real board name that can run this kernel instead of a generic
name. Basic functionality exits on this board with Zephyr.
Setup of the board is mostly similar to what we have in galileo (EFI
based)
Change-Id: Ic8554f26dcac0dbbbb6d35d863482f6207dc63c5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Using LOAPIC Timer as default since it is the default for most target
X86 systems.
Change-Id: I71c9b307839ebcf46fb28e1b709089de600af83f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previous it was renamed in favor of Qemu, now that we have board support
we move this to the original name and derive a qemu board out of the
platform.
Change-Id: Ia8769b27defa0a39503ecf2e6ec7fc6304b6ff49
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit also renames boards and makes naming consistent between
board name and defconfig files.
quark_d2000_reference -> quark_d2000_crb
quark_se_test_sss -> quark_se_sss_ctb
quark_se_test -> quark_se_ctb
Change-Id: Ibe6a5102edb987fe1d6ce32c8c392a87d45d6951
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We had one pinmux per platform with support for multiple boards.
This moves pinmuxing to boards as first step. Common functions that
are exposed by the API need to be moved to driver while keeping the
muxing configuration with the boards.
Change-Id: I2b4fabf663db98d644abcb5d51ba83adc6f74541
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Galileo pinmux configuration and reboot code belong into
the board and not the SoC.
Change-Id: If862178569438a8901902088bd085275416c25ef
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Define boards based on platforms/SoCs and define them under boards/.
Also unify the naming of all platform, SoC and board files and use
platform.h for platforms and board.h for boards.
Change-Id: Icfeb96479ab5800aca98c80a79bdc3cecd645314
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Galileo board is based on the X1000 SoC, so move galileo to
boards and create this SoC instead, inheriting all SoC related code
and configuration items.
Change-Id: I9b39f1b44644775ee48acae284b82bae7876fffb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
According to the schematic, SPI1_M_ should be properly mapped out
on the pinmux. This should enable the SPI1_M functionality on the
Arduino / Genuino 101 board now.
Change-Id: Ided0147e7c2d835aa58fdc5860e7ca7f55d9e566
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating the pinmux to use a local static table for each pin select
option. Instead moving to a static series of function calls that
move the data from the RAM section to the ROM section.
This impacts only the Quark D2000 and the Quark SE chips. It does
not show any impact to the basic_minuteia tests.
All said we see small changes that amount to some values like:
test platform ram_%_change rom_%_change
======================== ============ ============ ============
microkernel:footprint-max quark_se-x86 -0.01 0.0
microkernel:footprint-reg quark_se-x86 -0.02 -0.01
microkernel:footprint-min quark_se-x86 -0.07 -0.02
nanokernel:footprint-max quark_se-x86 -0.02 -0.01
nanokernel:footprint-max quark_d2000 -0.01 -0.01
nanokernel:footprint-reg quark_se-x86 -0.03 -0.01
nanokernel:footprint-reg quark_d2000 -0.02 -0.02
nanokernel:footprint-min quark_se-x86 0.04 0.01
nanokernel:footprint-min quark_d2000 -0.07 -0.04
Change-Id: Ib69403eced60a8c784887dca9dd1954ce73a3e70
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently the Quark SE and Quark D2000 platform are only included
through the use of a compile fence one level higher in the Makefile.
Adding in a secondary compile fence to ensure if that check ever
changes, we won't be in trouble.
Change-Id: I5e39faffb4289f80901c0264a50a3e770db3388a
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Initial import of the pinmux configuration for the Quark_D2000 series
boards. Some minor tweaking of default values may be needed depending
upon expected usage scenarios.
Change-Id: I3b22219546a6534c7c695d0917a35f6f46b03cf1
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adding support for the pinmux pins to set the pullup and input enable
registers. On the Arduino_101 board some pullup pins specifically can
be used to cause a reset for the Arduino sketch being run. Its use on
other pins is currently being investigated.
Change-Id: Id3293a4da84ea5bf553bf62ccb12782cb88503a5
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Naming convention should follow the IP_noun_verb concept. In this case,
renaming several functions from (for example) pinmux_set_pin to
pinmux_pin_set, while also correctly naming the function to their
specific tasks.
This is being done to make way for the ability to change the input
value, pullup value, and the slew as well.
Change-Id: Iec6f1723a48f80b66f3cea44df9bb6925972f6af
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Extending the public interface of the pinmux to allow the end user
to set a pin as an input/output and to pull up the value on
a specified pin.
Change-Id: Ie0a3b6432dd8c7d7a02f32e3d22049bdd99f1410
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
First step for adding the new board layer. Create configurations for the
various boards we support on x86 under boards with the new Kconfig variables
defining them.
The board selection is optional, that means you will be able to run
make menuconfig
and create your own .config and select any SoC.
Change-Id: If08e88e9675d13f0f0501ef6750b9424b15f5dc8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This variable (CONFIG_BOARD) will store the textual form of the
platform name and will be used for locating files related to the
board in the source tree.
Change-Id: I3c8a05ed428451a6785799a5492f0dd14682f208
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move SECONDARY init level from essential pseudo-fiber
to the idle task, so the device initialization routines
may use interrupts and wait for interrupts.
Change-Id: I5afa92d8b304de5b295450f0a8a761385b7c2566
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
When an app fail to run, windows show a pop-up with the errors.
To avoid this pop-up we disable this feature by default
Change-Id: If21f3aaf37555052874ee8e29310e955124d2cb0
Signed-off-by: Louise Mendoza <yonattan.a.louise.mendoza@intel.com>
This patch fixes some outdated or invalid comments and adds some
clarification of GATT Discovery procedure.
Change-Id: I91994917bea246a2d112df65123a3e6dec42ee92
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
bt_gatt_discover function doesn't take user data and therefore
bt_gatt_discover_func_t is not providing any user data. It was
always providing discovery parameterts used so just match that
in function definition.
Change-Id: I90086285d02e2ef50be1d5d25299bb1c6819fdd7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If pairing is rejected due to unsatisfying auth requirements
pending response buffer should be freed.
Change-Id: I8bbdad5fac8cd6dbcd674c7ad9725cf44ef79004
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds peripheral sample application that is configured
in LE SC Only Mode. It tries to set security level to FIPS right
after connection is created. Two paired devices are supported.
Change-Id: I78f3e3eeaf552c52f982035168e967016858a00b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch introduce new Kconfig option that is used to indicate if
device should operate in Secure Connection Only Mode. Enabling this
option removes support for LE Legacy Pairing.
Change-Id: If224b6786f4c840959fe87a31f0224bc1e21f90e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
We can calculate the length with strlen() and there should be no need
to consider anything else except nul-terminated C strings.
Change-Id: I02ec4b1dddbb1bd457f035926c86b27f4c2ab050
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Daniel Leung