Use the RV32M1 SoC intmux driver initialization priority set by
Kconfig. Change the default to match the default value of 40 used
before.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
I often wish I had a short and Zephyr-specific place to point people
to when they're asking for help in ways that make it hard to help
them.
Add one.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This is a bit wordy. Let's let the bold text and links stand on their
own; anybody looking at a README on GitHub or in technical
documentation probably knows what these things mean.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The struct _caller_saved is not used. Most architectures put
automatically the registers onto stack, in others architectures the
exception code does it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The struct _kernel_ach exists only because ARC' s port needed it, in
all other ports this was defined as an empty struct. Turns out that
this struct is not required even for ARC anymore, this is a legacy
code from nanokernel time.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
added three missing LEDS for stm32f4_disco, in order to run the
samples/basic/disco application on the stm32f4_disco
Signed-off-by: Jan Sturm <jansturm92@googlemail.com>
Add a simple Coccinelle script that counts identifier lengths and
prints out a warning if it is longer than 31 characters.
The script can be run with:
spatch -D report --very-quiet \
--include-headers --recursive-includes \
--cocci-file $ZEPHYR_BASE/scripts/coccinelle/identifier_length.cocci \
--dir $ZEPHYR_BASE \
kernel/
Where '--include-headers' and '--recursive-includes' can be omitted
if neede.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Be a bit more friendly to users, by providing some hints
about possible reasons why a command line option was not
understood.
Also describe in the help message that which options are
avaliable depends on what has been selected in this build.
Fixes: #15046
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Use the improved HMAC_PRNG test from TinyCrypt version 0.2.8,
(commit 6e0eb53fc8403988f97345e94081b0453f47231d),
that was imported into Zephyr in
commit 06d0b6a694.
Rewrote part of the test code to use the ztest asserts and
test_utils.h functionality.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Enables the pyocd runner on mimxrt1060_evk and mimxrt1064_evk boards
using the generic cortex_m target. Note that this target is not capable
of programming flash, therefore can only load an application to internal
SRAM (set CONFIG_CODE_ITCM=y and CONFIG_DATA_DTCM=y) or attach to an
application already programmed to flash by other means (e.g., DAPLink
drag-and-drop).
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
In non-secure Trustzone application dedicated flash non-secure
partition are used instead of regular one, which become secure
partition in Trustzone collaboration model.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The Harness handlers for tests were parsing the realtime stream out of
qemu pipes by recompiling and executing every regex for every line (!)
of output from the simulator. That's a significant CPU load, and it's
(1) in a separate thread not tracked by the JOBS limit and (2)
happening at the worst possible time and contending with the qemu
process for host CPU cycles that it needs to hit its (real world)
timer targets on time.
Compile them just once, please.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Same deal as in commit 4638652214 ("Kconfig: Use 'default' instead of
'def_bool' in Kconfig.defconfig files"), fixing new stuff that got
introduced since then.
Some symbols, like ALTERA_AVALON_PIO, are only defined in
Kconfig.defconfig files, and so need the def_bool.
Motivation (from the note at the end of
guides/kconfig/index.html#common-shorthands):
For a symbol defined in multiple locations (e.g., in a Kconfig.defconfig
file in Zephyr), it is best to only give the symbol type for the "base"
definition of the symbol, and to use 'default' (instead of 'def_<type>'
value) for the remaining definitions. That way, if the base definition
of the symbol is removed, the symbol ends up without a type, which
generates a warning that points to the other definitions. That makes the
extra definitions easier to discover and remove.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
I does make sense to use index only after we make sure it is valid,
issue is found in harness tests.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
To support mass storage over USB in RAM we need a board with
sufficient RAM. Fix failing tests for boards with low memory.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Instead of checking for -EINVAL check that return is not successful
since USB device may return other error code.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enable harness so we can execute smoke tests on the hardware with
command line:
sanitycheck --device-testing --device-serial /dev/ttyACM0 -p <BOARD>
-T samples/subsys/usb/hid
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add configuration, dts and documentation for the MINI-M4 for
STM32 board based on the STM32F415RG SoC.
See https://www.mikroe.com/mini-stm32f4 for more details.
Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
In stereo case the pdm stream continuosly alternates 1-bit from
the left channel with 1-bit from the right channel. In this case
we need first to demultiplex channels bits on byte basis.
Then the Open_PDM_Filter library has to be called twice, one for
each channel.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
If SDK_VERSION for whatever reason is unset cmake will end up in an
inifite recursion loop, which for me crashed using cmake version
3.13.4 and exits with an error using 3.14.1.
This may happen if ZEPHYR_TOOLCHAIN_VARIANT is set to "zephyr", but
ZEPHYR_SDK_INSTALL_DIR is invalid (or unset).
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
This commit adds CAN support for nucleo F746zg.
Furtermore CAN was added in stm32f7.dtsi and pinmuc_stm32f7.h
CAN_RX: PD0, CAN_TX: PD1
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Add support for pulsing the hardware reset pin of the FXOS8700 high
during initialization.
According to the datasheet, this is required for the I2C/SPI bus
auto-detection logic to work properly if the VDD/VDDIO power
sequencing order cannot be guaranteed.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
2 identical packages were defined for stm32f412 SoC, invariant "g".
Merge them in new sinclge stm32f412Xg.dtsi.
Update matching boards accordinlgy.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Splitting a string like 'foo="bar=baz"' on '=' will give ['foo', '"bar',
'baz"'] instead of the intended ['foo', '"bar=baz"']. split() with
maxsplit=1 to avoid potential issues.
Not seen in practice. Just some future safety.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The 'Shell Options' menu contains just the 'menuconfig SHELL' menu in
the menuconfig interface.
Remove the 'Shell Options' menu and put 'menuconfig SHELL' directly in
the top-level menu instead. Also change the prompt from "Enable shell"
to just "Shell", to make it consistent with "Logging".
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Previously, symbols not defined with 'menuconfig' with children weren't
listed in the children's menu paths. It was deliberate, but it's
probably an anti-feature in retrospect, because it can make it harder to
find stuff by following the menu path.
Don't try to be clever and just list all the parent nodes in the menu
path.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update Kconfiglib and menuconfig to upstream revision 90c5573c19, to get
these commits in:
Warn for unquoted argument to 'source', etc.
Print a warning suggesting to add quotes for things like
source foo/bar/Kconfig
menu title
prompt unquoted
Example warning:
Kconfig:32: warning: style: quotes recommended around
'lib/Kconfig.debug' in 'source lib/Kconfig.debug'
That quoteless syntax is supported for compatibility with old
versions of the C tools. It only works for a single word.
==================================================================
menuconfig: Include all parents in menu paths
Previously, symbols not defined with 'menuconfig' with children
weren't listed in the children's menu paths. It was deliberate, but
it's probably an anti-feature in retrospect, because it can make it
harder to find stuff by following the menu path.
Don't try to be clever and just list all the parent nodes in the
menu path.
==================================================================
menuconfig: Fix display issue for optional-prompt menuconfigs
_shown_nodes() needs to check whether invisible 'menuconfig' symbols
with optional prompts have visible children, so that they can be
shown outside show-all mode. Previously, only 'config' symbols were
checked.
==================================================================
menuconfig: Remember last saved/loaded path and improve
_conf_changed
Remember the last path that was manually saved/loaded instead of
reverting back to standard_config_filename() (e.g. .config).
Remember the path to the last saved minimal configuration separately
as well.
Also improve the _conf_changed behavior when loading a .config
within the interface. Instead of always treating it as needing to be
saved, check if it's outdated, like for the .config file loaded on
startup.
Also make the exit message ("No changes to save", etc.) always
include the target .config file, which is helpful. Previously, only
the save message did.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Henrik Brix Andersen