The esp_8266 shield was added without owner on #24710. Add myself as
an owner of esp_8266 shield files.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Exercise the public macros as well as device_map().
This test has a whitelist for whatever reason; add
mps2_an385 so that the !DEVICE_MMIO_IS_IN_RAM stuff
is tested.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This gets a little complicated as the driver could be
using PCI-E MMIO, MMIO specified by DTS, or I/O ports.
This driver doesn't use struct uart_device_config any
more.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Good example of the NAMED variants of the MMIO macros, since
an existing inheritance mechanism already took the first-member
slot of the dev_data/config structs.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fairly straightforward example of how to deal with PCIe.
The code considers whether a particular instance is PCIe
or not on a per-instance basis, so DEVICE_MMIO_ROM is not
conditionally defined.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A hack was required for the loapic code due to the address
range not being in DTS. A bug was filed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The ethernet driver no longer continues to try to initialize
itself if PCIe probing fails.
This device is always PCIe so we don't need to reserve ROM MMIO
storage.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This driver code uses PCIe and doesn't use Zephyr's
device model, so we can't use the nice DEVICE_MMIO macros.
Set stuff up manually instead using device_map().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Three variants provided:
- Drivers with one MMIO region to manage
- Drivers with multiple MMIO regions to manage
- Drivers or driver-like code which doesn't use Zephyr's device
model
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This currently only supports identity paging; there's just
enough here for device_map() calls to work.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This will be the interface for mapping memory in the kernel's
part of the address space, which is guaranteed to be persistent
regardless of what thread is scheduled.
Further code for specifically managing virtual memory will end up in
kernel/mmu.c.
Further defintions for memory management in general will end up
in sys/mem_manage.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This config indicates that a memory management unit is present
and enabled, which will in turn allow arch APIs to allow
mapping memory to be used.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add a small section that describes the existance of the coding
guidelines page and links to it, in order to raise awareness of the
effort towards complying with those.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Link to the coding guidelines from the main contribution guidelines
page, so that users are aware of the guidelines.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Aside from the MISRA-C derived Coding Guidelines, add a list for
additional ones that are not a subset of a standard.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fixing issues with recent versions of breathe 4.19.2:
WARNING: Unparseable C cross-reference: 'struct device'
Invalid C declaration: Expected identifier in nested name, got keyword:
struct [error at 6]
struct device
------^
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We still have cases where qemu crashes are not being correctly captured
in the on-screen summary, however they are captured in the final
generated report.
Fixes#26679
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change the default behaviour of the flash partition choice when no
matching compatible is found. The new default is the grandparent node
of the fixed-partition.
As the grandparent node is what the jedec_spi_nor and nordic_qspi_nor
compatibles were selecting, remove these as separate checks.
This allows the flash_map API to be used for implementations of the
flash API other than the 3 originally specified (soc_nv_flash,
jedec_spi_nor & nordic_qspi_nor).
Fixes#26397
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Disable test with long AD data being set, as 251 byte
Advertising PDU is not yet supported.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed memory corruption when using uninitialised previous
PDU to populate current PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix typo in logged Kconfig option name that is missing in used
configuration. This one was mostly problematic for developers wanting to
find such option in source tree using grep - NET_SOCKET_OFFLOAD was not
found in Kconfig files.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Resolves a corner case where the segmented sending would be rescheduled
before the segments were done sending. This would happen if the
processing of each segment took longer than the retry delay. The
consequence of this was that some segments were resent multiple times at
the cost of other segments, occasionally causing a loss of transfers.
Rearranges, realigns and documents seg_tx structure bitfields in
transport.c. Removes bitwidth of counter fields, and collecting all flag
fields into one byte.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
...instead of GNU binutils to extract DWARF information.
This is now a bit more portable across OS and toolchain.
One bouns is that this nows with on qemu_x86_64.
A few differences are:
() z_mrsh_* which are aliases to handler_no_syscalls() are now
dropped as they are mapped to the same address, so that they
are not counted multiple times.
() Static functions and variables with same names should now be
attributed to the correct source files instead of being
accumulated into the same symbol of one file (e.g. multiple
thread_entry() in kernel tests).
() The totals for ROM and RAM are calculated from the
corresponding sections. Previous script includes the debug
sections as total ROM size which is not entirely correct.
Fixes#22996
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enforce support for Read RSSI command if BT_CONN and BT_HCI_RAW are
selected. According to the Bluetooth specification, support for the
Read RSSI command is mandatory if the Connection State is
supported. BT_HCI_RAW indicates that the controller is an
independently qualifiable module and not part of a combined
host/controller build. This change avoids a configuration that cannot
be possibly qualified.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Change fixes storing subscriptions in settings. CCC write can interrupt
the ccc_delayed_store. Without the change, new CCC was not stored in
non-volatile memory and the work that stored CCC was not resubmitted.
That resulted in lost subscription after reboot.
Fixes: #26862
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Refactor implementation to perform enable and started state
updates at consistent places in code.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
1. Add code change to the test_permission_inheritance() to let it
test that child thread can't access parent thread object. Now that test
tests one more related to it feature.
2. Add new Doxygen tags with informative descriptions about the kernel
objects tests. That will make reading and understanding kernel object
tests code easier.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Add bond_deleted callback so that the application can keep track
of when bond information is deleted in the stack.
Bond information can be deleted by the application through bt_unpair
or automatically by the stack in some cases, e.g when
CONFIG_BT_KEYS_OVERWRITE_OLDEST is enabled and the oldest bond
is overwritten.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adding just the cache flush function for x86. The name
arch_cache_flush comply with API names in include/cache.h
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Add advertising option for undirected one-time advertising, and
directed advertising using identity, and peer direct is RPA option.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allow calling bt_le_adv_start with no connection object available
when not the option BT_LE_ADV_OPT_ONE_TIME has been set. In this
case the advertiser will be restarted once there is a connectable
advertiser object available.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Gerson Fernando Budke