SAADC peripheral for nRF54L Series allows to choose internal
voltages as positive inputs and samples shall showcase that.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
SAADC peripheral for nRF54L Series allows to choose internal
voltages as positive inputs.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Split header files containing symbols denoting SAADC inputs
so that only supported inputs can be used for given device.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
All the remaining modules uses LOG_MODULE_REGISTER(<module>, <log level>)
Lets update the logging registration as the other modules are doing it.
Signed-off-by: Kiara Navarro <sophiekovalevsky@fedoraproject.org>
In the test scenario without alarms, it might
be the case that counter is already running and
it will not match the expected tick.
This adds a tick offset into the expected value
based on current counter reading.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Force capture call so that timer counter value is updated
accordingly.
This also adds get_value_64 counter API function.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
When Proxy advertising or PB-GATT Advertising Enabled and use a same
advertising sets.
As adv\_start will call multi HCI Command will cause syswork_q yield.
At same time, if another thread(BT RX) all schedule\_send will cause
unable send mesh message, because ADV\_FLAG\_ACTIVE was be set, but
ADV\_FLAG\_PROXY not set currentlly.
Add ADV\_FLAG\_SCHEDULE\_PENDING indicate mesh buf has been pendings
but not scheduled, so when proxy advertising enable, let's take again,
as we can't break or terminated adv\_start, so we must waiting proxy
advertising enabled.
But after https://github.com/zephyrproject-rtos/zephyr/pull/68558
The `k_work_is_pending` always true in `send_pending_adv`, which cause
unable to send more mesh message until more mesh message comming
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Move myself from maintainer to collaborator.
I am not active enough on Zephyr to take on the role of maintainer.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
The FW blobs are contentious topic in OSS, so, add a provision to use
external tooling (e.g., NCS) to handle FW blobs for advanced usecases
(e.g., storing in external flash).
This won't be used upstream, only built-in or build-only are supported.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The smp library implements de/serialization of SMP messages.
The smpclient library implements the serial, BLE, and UDP
transport layers for Windows, Linux, and macOS.
Signed-off-by: JP Hutchins <jp@intercreate.io>
When try to start SAP on channel 12 with region code US, the channel
check will fail and calls supplicant_send_wifi_mgmt_ap_status() with
iface->owner is NULL, which causes DUT hang. Set iface->owner when
enable the SAP can fix this issue.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
The Drivers using Pinctrl should be turning Pinctrl on
this should not be the responsibility of the board. This
commit removes CONFIG_PINCTRL from the boards side for nxp boards.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
1. optimized the logic for buffer usage in async api
2. skip timeout flush when the remaining counts is 0,
as this will trigger dma_callback to process.
3. remove scatter mode, as we are not using this mode
4. trigger after dma_reload.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Modifies the CS bitfields that are used for accessing HCI
event data to take platform endiannes into consideration.
Signed-off-by: Burak Gorduk <burak.gorduk@nordicsemi.no>
Adds HCI support for LE CS subevent result continue
event and the reassembly logic for the partial results.
When subevent results are completed or the subevent is
aborted, the user callback is invoked with a buffer
pointing to the HCI event buffer, so no copy is done.
When subevent results are incomplete, then a reassembly
buffer is allocated from a fixed sized pool. This buffer
is used for the reassembling of the subevent result
containing all of the step data, which is then passed
to the user via the callback. kconfigs have been added
to set the size and the count of the reassembly buffer.
Signed-off-by: Burak Gorduk <burak.gorduk@nordicsemi.no>
Following the footstep of GCC/Clang cmake code to remove
TOOLCHAIN_LIBS, xcc also has it removed and utilizes
something similar to c_library to link the HAL library.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Shuffling of ld/lld on C library linking cmake code causes
issue with XCC as the HAL library is not being included in
linking. So make XCC to use xt-ld linker cmake code such
that the HAL library is included.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Removing the routine z_ready_thread_locked() as it is not
used anywhere. It was a leftover artefact from development
that previously escaped cleanup.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
As per board porting guidelines, the board image should be named after
the board.
This commit implements the changes for boards found to be non-compliant.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add ethernet phy header to ethernet group
Add ethernet.h to ethernet group
Add net/mdio.h to mdio group
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Don't attempt to take a mutex if operating from inside an ISR. The only
expected use-case where this should occur is when attempting to reboot
via `tfm_platform_system_reset` from an exception handler.
Fixes#79687.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Request calibration on ADC samples to improve the accuracy of the ADC
outputs and therefore the final measured current.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Instead of relying on INCBIN macros which do not properly add
dependencies, e.g., modifying FW file doesn't trigger rebuild.
Use the Zephyr cmake tooling to load the FW patch file as a header.
This also improves memory report where the patch target is clearly
visible instead of a hidden section.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This reverts commit e2e96acebf.
This will be properly fixes by adding a target for nRF70.bin and
removing INCBIN approach.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Nikodem Kastelik