When running echo-server in the Zephyr device (either a real
device or qemu), set the IPv6 address to be 2001:db8::2.
The host IPv6 address should be set to 2001:db8::1 in this case.
Change-Id: Ia967cecabece4b06a2f5a12b11c68a9de4aeb2af
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The prj_slip.conf file should be used for qemu-to-host
communication only. It is not usable for testing between
two qemus.
Change-Id: Id06813a1b36f33f585e06df3f29479891ea3d2d8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the CONFIG_NET_TESTING option should be only enabled
if we have Qemu-to-Qemu communication, clearly tell this
in the Kconfig help for that option.
Change-Id: Id1c65d17fb9859ead767294b2f43dd7b57b007ac
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix the correct location of net-tools project files to
samples/net/README file so that the user can test the
echo-server and echo-client apps using SLIP and Qemu.
Change-Id: Ic34fa6e67da916c63e4f138e1e0def5d7632c80c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
640 bytes seems too short, raising to 800 bytes.
Change-Id: I8c3418787939369e24fe47c23b0558c36f05af2c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Debugging messages in 6lo are enabled as well.
Change-Id: I8fea044216e3c4e60d742ebc7256489832ae09ac
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Only meant to be used while debugging deeply. Thus needs to be enabled
by hand in the source code.
Change-Id: Idf4e33154fee0e3d7e1da64708e1c7b4d790d790
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Packet is compressed after its ll part has been computed when sending.
And it is then decompressed after the ll part has been validated when
receiving.
Change-Id: Ifebbd5727623e94f1c2273f2211ba0f109ac4a8f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Buf ll addr need to point to the right place, depending whether it's a
plain address field (thus with the pan ID) or not.
Change-Id: I9897b1f9bec0f7cecd01517c69c3bdefe2bc204b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When there is no compressed header following IPv6 one,
the type of such header is set after tc/flow information.
Using it relevantly to set IPv6 nexthdr field.
Change-Id: I78d5ae8b8377f9bed6b682fa070f2b5fe28dd3ee
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is a minor fix where it has to continue decompressing the
header instead of ending it after getting src address.
Change-Id: Ice46ec62b8de07927624b275c2a98158d37316fb
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Also removing a superfluous label.
Change-Id: Ie27e868fe3328162bb3f42312dd2cfcc230aa509
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The given buffer might have an ll part already filled in, so handling
its content if any.
Also reordering the local variable declaration according to Zephyr's
style.
Change-Id: Iaf9c117d39c90d5f71ca3aad02a52ea9d9b34223
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fixing as well minor Kconfig issues related to IEEE 802.15.4
fragmentation.
Change-Id: I4edd3db4501563a473b7cdf15da8262b8443c0ac
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
For consistency as well as for helping when grepping etc.
Change-Id: Ib5e6b3369e510dd2b996f735d801c2b80291ad7f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If compression header watermark is not found, it will successfully
return as it's not an error. It just means there is not uncompression
work to do.
Using NET_ASSERT() to check the argument validity as well.
Change-Id: I907f3f197d59d7ddb546860d232d6ca20a4445e3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_core.h is loading sys_log.h as well, so we need to be
first in order to setup some local definitions.
Change-Id: Ife482bd21e314aa5a5e88433eb8f9a560f9d53a6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to control the state of this routine, as this
will be ran only once.
Change-Id: I2f9f04012d793787ba56ef6403f8a92e8e1b073e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is only meant for the new IP stack.
Change-Id: I643b0556f87423f09555274749db93397ef66c59
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Reassembly IEEE 802.15.4 fragments as per it's datagram size
and datagram tag. Uncompress IP header fragment as soon as it
arrives. Size matches only after uncompression of IP header with
total length.
Support added for multiple IP packet reception. Default is one full
IP packet at a time. Cache size can be modified via Kconfig option
(NET_L2_IEEE802154_FRAGMENT_REASS_CACHE_SIZE).
Note: If you increase the size by 1 means, you should have N number
of data buffers available at max.
e.g. One full IP packet (1280 MTU) needs 15~16 data fragments means,
multiply size by same number of fragments. It requires more memory.
Offset based reassembly yet to be done (fragments can come in any order
[e.g. mesh]). Now assuming that fragments are in right order.
Change-Id: I17baee30a1087eb9ec6dc25f03ed64bbe0df2917
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If IPv6 packet exceeds IEEE 8021.15.4 payload, it should be
fragmented as per RFC 4944 and RFC 6282.
Change-Id: Ic02c3089a510a8f6ffe3c3cd4537284a06ac1453
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add support for IPv6 header dispatch (without IPv6 compression
and uncompression). Only IPv6 dispatch header will be added at the
beginning of the buffer.
Change-Id: I7400a4dd115ac3b4b3d9deecd3cdb9ea292573fb
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
6lowpan compression and uncompression done on original
input buffer. So no need to return paramter as net_buf *.
If the compression or uncompression fails, unref the buffer
as it cannot be used further.
Change-Id: I64f496e22b2008a91a358fff65de1b87659cd9eb
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
UDP length was wrongly set and test count was hardcoded.
Change-Id: Iade959e1b8c3580b43aa2a9ff1fc10eb5a462f2f
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The neighbor index only works when indexed over neighbor pool
as that takes into account the additional data that is embedded
after the net_nbr struct.
Change-Id: I3a5b971beccb24735e75dd87bfefc75bebba30dc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code tried to access the neighbor via index but this does
not work as there is embedded data after the net_nbr struct.
Change-Id: I3efe325266ac244d82f2c713ed5530eeb0e6a363
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the received IPv6 router advertisement contains prefix
address options, set the validity of the prefix and expire
them when needed.
Change-Id: I7026d2101bd9eca1f90688c14d5c6aaa66e4af5e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to use target address when checking whether
the IPv6 neighbor cache as the destination address is
typically a multicast address and it will never be in
the neighbor cache.
Change-Id: I13ba90e164393a7ab92bcb388a9d1d83f849fd4b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is no pending data when IPv6 neighbor advertisement
is received, then do not try to use NULL pointer and send
bogus data.
Change-Id: I3225e0ffbfdfcd6f2cb3789af0b3a7158ffca24d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IPv6 neighbor discovery reachability timer support
was missing.
Change-Id: I54e934b65abe2e99b11762ad29f43b69a8a97754
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add utility function that cleanups the neighbor cache.
Change-Id: I77363566469c4f9d0410c08b5a3009bbe8d1b96e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As we know the network interface, use it when creating
initial entry in neighbor cache.
Change-Id: Ife022ffbdf0e8fb84253091b4072aebcee026e34
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We allocate a neighbor entry when neighbor solicitation is received
from peer.
Change-Id: I837262af1ccfba42d52075f32cb15f402b483f55
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not try to send invalid packet that does not have
link layer address set.
Change-Id: I48292fbd57841d069e00c57028b4be53eba4e732
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Install a timer that will drop pending packet if we have not
received NA in timely manner.
Change-Id: I32b133314603a9a1b52d304eb8631f5b174e26f5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of macros use inline functions to access the data so
we can catch wrong pointer type kind of errors.
Change-Id: I281a4c902cd98e71b77d2f555b2edbe56ecceea3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The nbuf.h was not included by net_private.h
Change-Id: I51daf4fecded6347ffcc9cf2be44a6d94319220c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Jukka Rissanen