Removes alwa-nordic from the following paths:
/tests/bluetooth/bsim_bt/bsim_test_mesh/
/tests/bluetooth/mesh_shell/
This is done by adding new definitions for those paths, inheriting the
owners of the previously matching rule, but without alwa-nordic.
PavelVPV is added to both entries.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Section numbers do not match between v1.0 and v.1.1 so refer only to
those by their names which stay the same.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Check if __STDC_VERSION__ is defined before referencing it. This will
prevent a compilation failure when __STDC_VERSION__ is not defined for
any reason.
Signed-off-by: Rob Barnes <robbarnes@google.com>
New filter "TOOLCHAIN_HAS_NEWLIB == 1" was applied
because of following chain of dependencies:
LOG_MIPI_SYST_ENABLE=y --> CONFIG_MIPI_SYST_LIB --> \
--> REQUIRES_FULL_LIBC --> NEWLIB_LIBC.
Not all compillers announced in Zephyr support NewLib.
Signed-off-by: Nikolay Agishev <agishev@synopsys.com>
This commit adds missing binding file for the ite,it8xxx2-usbpd.
Without this file, the DT_HAS_*_ENABLED macro wasn't defined and
couldn't be used in the Kconfigs.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
in some builds there is need to pass different value for -i parameter
and current code will override it to 3
Also in rimage i parameter is by default set to 3
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
These tests turn on mbedtls and require ajusting min flash
requirements to prevent twister from trying to build them on
platforms without required amount of flash.
Fixes: #51421
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
This check makes no sense outside of the upstream zephyr CI and
causes downstream CIs, which are forked from the upstream, to fail.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Only enable the TF-M Audit Partition in the TF-M regression tests when
Library model is used.
This is not supported in IPC model and produces a Kconfig warning.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the TF-M library mode explicitly instead disabling IPC model and
relying on this selecting Libray model in the choice.
This is a follow-up on the TFM_IPC being put into a choice selection
when SFN model was added.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Spin locks must be in coherent memory for cavs. Initially this variable
was at the compilation unit scope but warnings about it being unused
from a twister run lead me to move it to be in the ifdef scope in the
function.
Move it back into the compilation units scope and wrap it in an
ifdef to ensure its not labeled as unused.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
This patch updates my status on areas where unfortunately I no longer
have time or interest to contribute:
- Removed my collaborator status from STM32, display, sensors, kscan,
PWM and hal_ti
- Downgraded my status from maintainer to collaborator for the GD32
platform
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Without this define, the structure iis2dh_device_config
is defined incorrectly.
The structure is defined in iis2dh.h file as follows:
struct iis2dh_device_config {
struct spi_dt_spec spi;
struct i2c_dt_spec i2c;
uint8_t pm;
struct gpio_dt_spec int_gpio;
};
without the macro
the structure is defined as
struct iis2dh_device_config {
uint8_t pm;
struct gpio_dt_spec int_gpio;
};
which results in accessing the wrong data when
calling iis2dh_init_interrupt
function (or any other functions in this file)
Signed-off-by: Mehdi Zemzem <mehdi.zemzem2@gmail.com>
Remove inclusion of moved and non needed header.
Other unneeded headers have been also removed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This adds the SMP groups to a separate heading and makes them visible
in the contents list so that they can be selected without having to
go to a specific page to find them.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Update twister to support running QEMU platforms with sysbuild, by parsing
domains.yaml and executing the "run" target of the default application.
This will allow twister to test QEMU targets with sysbuild. It is assumed
that QEMU targets will add any external images they need in the build
phase
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Ensure that QEMU_PIPE variable is set when using sysbuild. This is required
because twister will use the "main" sysbuild application as the target for
"ninja run" when testing QEMU targets, which means that the "main" build
must be aware of any QEMU_PIPE setting passed by twister at build time.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Since twister can make use of domains.py as well, refactor west's use
this file so that domains.py can be moved to a generic library folder.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Exclude scripts/pylib/build_helpers from default gitignore behavior of
ignoring all directories whose names begin with build, as this directory
is used for build helper scripts shared by west and twister.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Linking fails on ubuntu 22.04 because of multiple definitions of the `fff`
global, which is defined by `DEFINE_FFF_GLOBALS`.
Only define it in the tests' `main.c` instead of the mocks.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
buf.c have been providing net_buf pool allocator and dealocator
for SMP packets: mcumgr_buf_alloc and mcumgr_buf_free.
The functions have been moved to smp.c and renamed
smp_packet_alloc and smp_packet_free, respectively.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
SMP buffer allocation functions have been moved to smp/smp.h,
and buf.h has been removed.
Definitions of cbor_nb_reader and cbor_nb_writer have also been moved.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit moves functions used for initialization of CBOR encoding
and decoding to the only unit that is supposed to use them.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add the alias of GY271 in it8xxx2_evb.overlay. Modify the
testcase.yaml, as the GY271 is magnetic sensor, not accelerometer
and remove the harness.
Signed-off-by: Hu Zhenyu <zhenyu.hu@intel.com>
If 2 ASEs shared the same CIS and the first ASE had the CIS
connected before the second ASE was QoS configured, then
the CIS was missing either the TX or RX pointer, causing
it to be considered unidirectional by the ISO layer.
This commit fixes this issue by configuring the (static)
pointers at an earlier time, so that the RX and TX QoS
pointers are always valid.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename timer object instance create funciton `timer_create` to fix a
name collision regression with a POSIX function in `timer.h`. The issue
was introduced with commit 73a637eda0 when
first including`timer.h` into `lwm2ms.h`.
Signed-off-by: Marc Lasch <mlasch@mailbox.org>
The API documentation currently lists two entries with the same name
"IEEE 802.15.4 Library". This change fixes this by separating the
network library from its net management library.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Move runtime checks to use arch_num_cpus() and build checks
to use CONFIG_MP_MAX_NUM_CPUS. This is to allow runtime
determination of the number of CPUs in the future.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Move runtime checks to use arch_num_cpus() and build checks
to use CONFIG_MP_MAX_NUM_CPUS. This is to allow runtime
determination of the number of CPUs in the future.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Move runtime checks to use arch_num_cpus(). This is to allow
runtime determination of the number of CPUs in the future.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Add #ifdef CONFIG_SMP around code that only needs to exist when
SMP is enabled.
Also include ksched.h to get decleration of z_sched_ipi.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
This configuration option gives the possibility to not enable
the fs backend on startup.
Backend can be enabled in runtime using log_backend_init and
log_backend_enable functions.
Implementation is based on log_backend_net.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
DNS SD test suite does not really make use of IP connectivity, so
there's no need to configure IP addresses.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As the UDP test suite is mostly intended to run over loopback, use
loopback addresses and skip configuration of other addresses.
For the test cases that use fake Ethernet iterface the configuration
is done manually anyway, so just rename the symbols to avoid
collission.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As the TLS test suite is intended to run over loopback interface, use
loopback addresses and skip configuration of other addresses.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As the TCP test suite is intended to run over loopback interface, use
loopback addresses and skip configuration of other addresses.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Aleksander Wasaznik