We should not set PLLSRC bits here. It is done by
LL_PLL_ConfigSystemClock_* functions which are called later.
Also, PREDIV1 setting should not be restricted to HSE only.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
This commit adds the PWM LED definition in the board device tree for
the on-board LED connected to the pin PC18.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the device tree TCC (Timer/Counter for Control
Applications) peripheral definitions for the Atmel SAM D5x and E5x
series SoCs.
The SAM D5x/E5x series SoCs have five instances of the TCC peripheral:
TCC# Channels Waveform Output Counter Size
0 6 8 24-bit
1 4 8 24-bit
2 3 3 16-bit
3 2 2 16-bit
4 2 2 16-bit
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This is necessary to avoid collision between drivers that calls
NET_BUF_POOL_DEFINE with the same name.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Description was updated so reflects fact that this
option activates SW_VECTOR_RELAY_CLIENT feature now.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Define vector relay tables for bootloader only.
If an image is not a bootloader image (such as an MCUboot image)
but it is a standard Zephyr firmware, chain-loadable by a
bootloader, then this image will not need to relay IRQs itself.
In this case SW_VECTOR_RELAY_CLIENT should be used to setting the
vector table pointer in RAM so the parent image can forward the
interrupts to it.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Co-authored-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
test_reporting_testsuite.py: Adding testcases for reporting
functions of Class testSuite.
test_testsuite_class.py: Testcase for add_instances function
conftest.py: Added fixture for instances_fixture
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Modifying discard_report function to fix the check for
self.discards dictionary in try block. self.discards
is None is dead code which didnot check if the dictionary was
empty. Changed it to if not self.discards.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
GICv3 is now support for SGI generation and test case is updated
to use GICv3 apis. bcm958402m2_a72 can be enabled now.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
This commit is a cleanup in two test samples.
In both samples, the following line of code were found:
set(DTS_ROOTS ${CMAKE_CURRENT_LIST_DIR})
Firstly, it is not needed to set `DTS_ROOT` in samples, as the sample
folder is always added to `DTS_ROOT`.
Secondly, the variable is named `DTS_ROOT`, but the samples used a
misspelled version `DTS_ROOTS`, which means that variable has never
had any effect.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Attempt to perform fs_read, fs_write, fs_seek, fs_tell, fs_truncate
and fs_sync on file that has been closed, prior to attempt, would cause
NULL pointer dereference.
With this fix, such operations would instead return -EBADF.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
If fs_close gets invoked on closed file (e.g. double close) it would
cause NULL dereference and system crash. Instead now it will just
return with success, as the file is already closed anyway.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Enable internal DAC to ADC loopback on the NXP TWR-KE18F
board.
Increase the ADC sample time to 5 microseconds since there is no
buffer between the DAC and ADC.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add a Kconfig option for enabling the DAC test output. On the NXP
KE1xF the DAC test output is internally routed to ADCx SE23.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add support for STM32L0X using the generic STM32 backend. This is
quite a significant change since the L0 series uses a slightly
different flash controller. Refactor the generic backend to better
support different block sizes and the L0's register interface.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Several STM32 chips have identical chip-specific code that has been
duplicated in different source files. Unify the F0x, F1x, and F3x to
use a single implementation.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
- Report build errors as errors, not test failures
- Do not try and build/run tests with build failures
- Fix issue with empty reports when running --only-failed
- Report build errors in the detailed and target reports
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The conversion from cycles to nanoseconds was using the incorrect
macro which resulted in microseconds instead. So fix it by
using the correct macro.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
ZEPHYR_SDK_INSTALL_DIR will be set as an internal CMake variable when
using the Zephyr SDK.
The Zephyr SDK zephyr/host-tools.cmake will ensure to set the CMake
ZEPHYR_SDK_INSTALL_DIR variable to the environment setting, or the
install directory in case the CMake package was used.
Users not using the environment variable will experience the following
error:
```
Linking C executable zephyr/.../bootloader/bootloader.elf
FAILED: zephyr/.../bootloader/bootloader.elf
<path>/xtensa-zephyr-elf/bin/ld: cannot find -lhal
```
This commit ensures code build correctly both when setting the
environment variable ZEPHYR_SDK_INSTALL_DIR, and when using Zephyr SDK
CMake `find_package(Zephyr-sdk)`
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Too much traffic is causing this workflow to generate noise and
conflicting labeling. Disabling for now while we investigate.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Save link key to settings_subsys, no need to re-pair after restart.
Overwrite old pairing records with aging counts.
Signed-off-by: ZhongYao Luo <LuoZhongYao@gmail.com>
The hci-cmd currently accepts only a 1 byte parameter. This
disables use of commands that requires more than 1 byte,
for ex. the feature exchange that requires a 16 bit parameter.
This commit allows a datafield parameter up to 65 bytes long.
65 bytes comes from the nr. of parameters for the
HCI_LE_Generate_DHKey command
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Friend Request is also transmitted over local queue and
if both Friend and LPN features are enabled then we would
try to establish friendship with ourselves.
Fixes MESH/NODE/FRND/LPN testcases.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
The hardcoded value was arbitrary and interfered with message cache
mechanism causing invalid behavior and PTS test to fail.
Fixes MESH/NODE/RLY/BV-02-C.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
According to Mesh Profile Test Specification we should still
relay messages with DST address that is RFU.
Fixes MESH/NODE/RLY/BV-01-C.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Key refresh procedure was ignored on non-primary subnet.
Mesh Profile Specification v1.0.1:
3.10.4 Key Refresh procedure
"This procedure is used when the security of one or more network
keys and/or one or more of the application keys has been compromised
or could be compromised."
"It is possible to update each NetKey independently of all other
NetKeys. A Key Refresh procedure for one NetKey can be in a different
phase to another Key Refresh procedure for other NetKeys."
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Reset provisioning bearers when bt_mesh_reset() is called. Accept
another provisioning attempt after link close.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
This value was used quite often in the file so adding a
descriptive name should improve readability.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
The comparison of a current tx link transaction id caused
us to not send ack and in effect fail provisioning.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
ringbuf claim API returns pointer to contiguous area. In cases when data
in ringbuf wraps the end of internal buffer, then single call to claim
data is not enough to get all data - there is remaining part on the
beginning of internal buffer. Those remaining bytes will need to wait
for next ISR handler to trigger workqueue. Theoretically this means that
data on the beginning of ringbuf can wait there forever, or simply to
the next timeout in PPP stack when data traffic continues.
Consume data from ringbuf in a loop, stopping only when claiming results
in empty buffer. This will make sure that there is no stale data in the
ringbuf.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Claimed ringbuf bytes were parsed until first frame was detected, but
remaining data in the claimed area was just ignored / lost.
Continue parsing bytes to the end of claimed area after each detected
frame.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Ilya Tagunov