Nordic Semiconductor's Microcontroller Development Kit
provides a set of low-level header files that describe
the different hardware registers and peripherals of
Nordic ICs.
This new version adds support for the nRF52840 IC.
Origin: Nordic MDK 8.11.1
URL: http://www.nordicsemi.com/eng/Products/Bluetooth-low-energy
Maintained-by: External
JIRA: ZEP-1418
Change-Id: I76793f8f2bb1e588ed5244bd19a020bad021839b
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The new Nordic MDK redefines certain UART signal names for backwards
compatibility with the new nRF52840 IC.
This patch addresses the potential name conflict between the redefined
signals and the existing variable names defined in the UART driver.
JIRA: ZEP-1418
Change-Id: I559d9335d2eeaa0a88d3f261b70508a1c98b989d
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In preparation for the new Nordic MDK and nRF52840 IC support we switch
to using the SERIES config instead of the old "NRF52" macro that will be
deprecated in the new MDK.
JIRA: ZEP-1418
Change-Id: I563f025c9db9b7497116c5af23814d95c720f836
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use a short name for this option CONFIG_OBJECT_TRACING.
Change-Id: Id27de7ef9ca299492b6b7d2324d9f5bcf8059a31
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Also remove mentions of unified kernel in various places in the kernel,
samples and documentation.
Change-Id: Ice43bc73badbe7e14bae40fd6f2a302f6528a77d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Reorganise and cleanup Kernel Kconfig options and group options of the
same area under Menus to ease readability and to have a better structure
when using menuconfig.
Change-Id: Ic6b39730297861367abd345ede35e41c046c099d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move those into a separate Kconfig file and include them instead.
Change-Id: Ifa25d6ec92937080ad5970af7ca5c3f07ddec961
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
rename NANOKERNEL_TICKLESS_IDLE_SUPPORTED to
TICKLESS_IDLE_SUPPORTED and remove nanokernel occurances in Kconfig
files.
Make TICKLESS_IDLE depend on hardware that supports it.
Change-Id: I6a2e4fb0f7cf4b45475b48e71823ea089ee98759
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Also remove some old cflags referencing directories that do not exist
anymore.
Also replace references to legacy APIs in doxygen documentation of
various functions.
Change-Id: I8fce3d1fe0f4defc44e6eb0ae09a4863e33a39db
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
PRINTK was conflicting, reanme to DBG.
Jira: ZEP-953
Change-Id: If5d6ef385c5ed223f6f7eae9bde887ae4a1b946a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
That module is not used anymore: it was introduced pre-Zephyr to add
some kind of awareness when debugging ARM Cortex-M3 code with GDB but
was never really used by anyone. It has bitrotted, and with the recent
move of the tTCS and tNANO data structures to common _kernel and
k_thread, it does not even compile anymore.
Jira: ZEP-1284, ZEP-951
Change-Id: Ic9afed00f4229324fe5d2aa97dc6f1c935953244
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
TinyCrypt 0.2.5 was released a few hours ago:
https://github.com/01org/tinycrypt/releases/tag/v0.2.5
This patch updates some TinyCrypt files, solving the following issues:
- Decryptions using ccm mode can incorrectly fail
- Minor style issues in code documentation
Change-Id: I606cde179888aad7a52fd277d73973f2347d8882
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
If we have Bluetooth or GPIO SCH we need multithreading right now
so disable any platforms that enable these features from running
this test.
Change-Id: I1ea35636e1382aac0f266fe73441619f9ac00d53
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The K64F board has the ENET ethernet driver. Behavior consistently
with other driver selection logic and default the KSDK ethernet driver
on if ETHERNET drivers are enabled.
Change-Id: I2fbed7fdef22d75cf163b61b3e0530ce00d988f0
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
And also remove now obsolete ARCH_HAS_TASK_ABORT.
ARC does not need the options either.
Change-Id: Ie52d63178a367ce12b911dacfe2d389f4f75ed2d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The system work queue spawns a coop thread to hanlde the work items. If
it is spawned before the kernel is up and the initialization dummy
thread's priority is lower, there will be a context switch into the
system work queue's thread at that time, before the kernel is ready to
handle this.
Change-Id: I879659ab58231c5a5cfaa34f2f65c2eccab99142
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Legacy applications still need that, otherwise kernel objects are not
configured correctly. Will be removed later.
Change-Id: I22df10e4adcc11f035f9813bea8c93dd1a560a1d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove CONFIG_BMI160_TRIGGER_SOURCE_GPIO from prj config
file. It is not being used any more.
Also change CONFIG_STDOUT_CONSOLE to CONFIG_PRINTK. The
whole sample is using printk instead of printf.
Change-Id: I4ac7db37da1e45aed2457ace9e82385e37143c36
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
After commit 71c7c01819 about buf pool, we
started to get spurious behaviors on various places of the code on
different boards (a101, frdm...) BUT on qemu. Basically, outgoing ip/udp
packets were full of garbage. Or sometimes it was the abilitty to parse
incoming packet that was happening.
The difference between qemu and actualy boards is - afaik, at least, let
me know if I am wrong - that qemu provide initialized memory (full of
0s). Following this asssumption, this patch just reset the nbuf right
after it got allocated. And all started to work again as thought.
It's in fact a good thing to reset nbuf memory. Even before the above
commit: after being used more than once, a buffer would have ended up
with old content, and this could have been generating a bug. So let's be
on the safe side and always intialize nbuf content.
Change-Id: I50647d9e9b82a4ed340a5ceb0d69409b0194dddd
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Carles Cufi