This cleans up the exception handling by removing the table declaration
from xtensa_intr_asm.S, and removing the unused
_xt_set_exception_handler() function.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The Xtensa port was the only one remaining to be converted to the new
way of connecting interrupts in Zephyr. Some things are still
unconverted, mainly the exception table, and this will be performed
another time.
Of note: _irq_priority_set() isn't called on _ARCH_IRQ_CONNECT(), since
IRQs can't change priority on Xtensa: while the architecture has the
concept of interrupt priority levels, each line has a fixed level and
can't be changed.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Dynamic IRQ allocation has been yanked from Zephyr a few releases ago,
so there's no point in keeping these options available.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The random number generator from ESP32 uses noise from Wi-Fi and
Bluetooth radios. If these are off, a pseudo-random number is
generated instead; this is currently the case, but even though it's a
black box, it's arguably better than returning a timestamp as a
pseudo-random number generator.
According to the ESP32 Technical Reference manual, the RNG passed the
Dieharder Random Number Test suite (version 3.31.1)[1], but nothing has
been said about the quality of the PRNG.
The RNG register is read directly; no effort is made to use its
contents to feed an entropy pool in a way that's similar to /dev/random
on POSIX systems, as no such subsystem exists on Zephyr at the moment.
[1] http://webhome.phy.duke.edu/~rgb/General/dieharder.php
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Zephyr's watchdog API is badly designed in the sense that it's a 1:1
abstraction on top of whatever Quark D2000 expects for its watchdog,
instead of expecting a generic timeout value.
This implementation tries as much as possible to calculate the watchdog
timeout in a way that's compatible with a Quark D2000 running at 32MHz;
a comment in adjust_timeout() explains this in more detail.
Jira: ZEP-2296
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This provides basic GPIO support, with interrupts, and the ability to
read and write to ports on a pin-by-pin basis.
Jira: ZEP-2286
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This implements a driver for the pin multiplexer as present in the ESP32
SoCs.
All APIs are supported.
Jira: ZEP-2297
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
According to the "ESP32 Technical Reference Manual", the ESP32 SoC
series supports up to 6 functions per GPIO pin. Add PINMUX_FUNC_E and
PINMUX_FUNC_F.
Jira: ZEP-2297
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
- board name olimex_stm32_p405
- CPU STM32F405RGT6 Cortex M4
- LED/BUTTON support
- Console on USART2 with 8n1 115200 baud
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
This patch adjusts the ARM MPU implementation to be compliant to the
recent changes that introduced the opaque kernel data types.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch always defines the ARCH_THREAD_STACK_XXX macros/functions
regardless of the MPU_STACK_GUARD usage. Only use MPU_STACK_GUARD when
determining the minimum stack alignment.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Following test changes, log info have changes and previous log info
with stack guard present shows an mpu error not caused by a stack
overflow caught by mpu stack guard feature.
Signed-off-by: Michel Jaouen <michel.jaouen@st.com>
This test launches several threads. Only last thread will overflow the
stack and an mpu exception will occur. The other threads are regulary
suspended, this triggers access to kthread structure. This tests is
failed on st and nxp platform, if 32 bytes alignement is not set.
Signed-off-by: Michel Jaouen <michel.jaouen@st.com>
The mimimum mpu size is 32 bytes, but requires mpu base address to be
aligned on 32 bytes to work. Define architecture thread macro when
MPU_STACK_GUARD config to allocate stack with 32 more bytes.
Signed-off-by: Michel Jaouen <michel.jaouen@st.com>
The alignment went off because of the move to use internal fixed-size
integer types (instead of standard int types).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It used to be that there was a fairly empty "Bluetooth Drivers" menu
entry in the drivers menu. This entry was present even though there
was no drivers/bluetooth code being compiled in.
With this patch "Bluetooth Drivers" will no longer be present when
BT_CONTROLLER is enabled.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The CONFIG_BT_WAIT_NOP define is used only by
zephyr/subsys/bluetooth/host/hci_core.c.
It is also the only config in drivers/bluetooth that is in use when
BT_CONTROLLER is enabled. Moving it into the bluetooth subsystem
allows us to restructure the drivers/kconfig code such that the entire
Bluetooth driver menu option is omitted when the BT_CONTROLLER is
enabled.
Moving it will also mean that all configs in drivers/bluetooth will
now be related to configuring the source code in drivers/bluetooth.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
In the stm32_gpio_flags_to_conf function the configuration
values of the GPIO pin are shifted two times. One in the
stm32-pinctrlf1 header and one in the function. This patch
removes one of those shifts.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
shell_exec expects a string that is null-terminated but if line passed
to strncpy is equal or bigger than the buffer it will not produce a
null-terminated command.
Jira: ZEP-2474
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The value of the PTE (starting_pte_num) was not
calulated correctly. If size of the buffer exceeded 4KB,
the buffer validation API was failing.
JIRA: ZEP-2489
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Added function helps setting the longest possible rx and tx buffers for
single SPI transfer. Each of these buffers is a continuous memory
region. It is useful for example when peripheral supports easyDMA.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
If the device has multiple network interface, then we must not
blindly use the default one but get the IEEE 802.15.4 network
interface when setting radio parameters in the shell.
Jira: ZEP-2432
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print route information by groupping them for each network
interface like this:
IPv6 routes for interface 0xa8007140
====================================
IPv6 prefix : 2001:db8::212:4b00:0:3/128
neighbor : 0xa80065e0
link addr : 00:12:4B:00:00:00:00:03
IPv6 prefix : 2001:db8::212:4b00:0:1/128
neighbor : 0xa8006660
link addr : 00:12:4B:00:00:00:00:01
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add "net rpl" command to net-shell which will return both static
RPL configuration from Kconfig, and dynamic run time configuration
of the nodes and parents.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create net_rpl_foreach_parent() function that will traverse
through all the parents and return their information via callback.
This is needed by net-shell in later commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If debug level was low but debugging was activated, then some
of the debug variables were left unused.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_rpl_repair_root() and net_rpl_set_root_with_version()
functions were static which prevented global repair when using
an instance id. Making those functions global allows RPL network
repairing from shell for example.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The commit b14586c3ca ("net: rpl: RPL route entry was fetched
too late") dropped the DAO packet too early which prevents the
RPL root node functionality. Rework the earlier commit so that
Coverity issues are fixed but the RPL DAO message is also properly
handled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Johann Fischer