This command can list and install SDK.
Run 'west sdk install' to install the SDK.
Run without any parameter, installing
specified by SDK_VERSION in the source tree.
'west sdk' to show installed SDK information.
This command is just a wrapper for SDK's setup command,
but it simplifies the installation process. It will be a good
improvement for onboarding first-time users.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Removes calling k_busy_wait() and uses k_msleep().
Updates polling rate of EEPROM busy status after read request to 1 ms, as
recommended by the app note.
Signed-off-by: Jakub Topic <jakub.topic@anitra.cz>
The tests manually include sources that are normally conditionally
included (ie based on kconfig values) in the stack.
The tests should be fixed by the original authors.
For now, force-on the hidden kconfig that enables the log options.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
`OTS_CLIENT=y` and `OTS=n` is a valid config.
Since the logs weren't conditionally included, this flew under the radar
for a while.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
- got rid of "Others" menu
- JK I made a new one: "Common"
- moved all host-related opts to "Host" instead of "Others"
- moved all audio-related opts behind `if BT_AUDIO`
- moved only controller kconfig to controller/Kconfig.ll_sw_split
- it had a dependency there already
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Having all the configs be visible by default clutters the menuconfig
view. Make them visible only when the corresponding subsys or module is
enabled.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Commit 698a0c3193 changed the bluetooth_api
section title, which made the reference in the Coding guidelines turn into
"API", which is confusing.
Use a fixed title for that reference to fix the issue.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
There was hardcoded value for user_data which is no longer valid.
Use proper CONFIG_BT_CONN_TX_USER_DATA_SIZE for that.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Align all sensor drivers that are using stmemsc (STdC) HAL i/f
to new APIs of stmemsc v2.6
Requires https://github.com/zephyrproject-rtos/hal_st/pull/21
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Fix warnings generated when performing sensor drivers build test
due to typos in i2c DT definition.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
All the network related shell activities should be under
network shell so moving it to "net bridge ..." command.
Add this information to migration guide.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Remove the references to the breathe extension in the
Schematic of the documentation build process graph and
the filtering expected warnings section.
Signed-off-by: Simon Hein <Shein@baumer.com>
The generated HTML was broken, even though the rst files themselves
contained the correct URLs. Update to a different format which should
generate the right output.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
set high_bandwidth and use the cfg->mps to set
ep_init.maxPacketSize because NXP MCUX controller
driver supports additional transaction bits in
maxPacketSize.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Instead, use the helper to get the size field from the MPS value.
MPS value may contain information about additional transaction
per microframe (bits 12..11).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Make driver aware of High-Bandwidth endpoints both in Completer and
Buffer DMA mode. In Completer mode TxFIFO must be able to hold all
packets for microframe, while in Buffer DMA mode space enough for two
packets is sufficient.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
DMA is capable of packetizing transfers on its own and the driver
doesn't need to check available TxFIFO size when scheduling DMA
transfer.
Split packets on DWORD boundary when writing more than one packet to
TxFIFO in completer mode.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add macros for converting between Max Packet Size and total payload
length. Allow drivers specify whether endpoint supports high-bandwidth
interrupt and high-bandwidth isochronous transfers.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Use COND_CODE_1() instead of UTIL_AND() to make it possible to only
define the HID_MPS_LESS_65_ macros up to value 64.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
wMaxPacketSize in endpoint descriptor is stored in little-endian order,
but the mps parameter passed to functions is in host order.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This adds a kconfig option to force
tx blocking on serial. This way only rx
will use the interrupt.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
To prepare for supporting flexcan, can node should be
renamed to canxl to support both flexcan and canxl
Signed-off-by: Tu Nguyen Van <tu.nguyenvan@nxp.com>
The received messages are put into the FIFO one by one in the
order, the hardware will return the queue index for current
message. So use the index instead of reading always from 0.
Signed-off-by: Ha Duong Quang <ha.duongquang@nxp.com>
CONFIG_BT_CONN_TX_USER_DATA_SIZE is now used for callbacks in the host.
We don't want to limit ourselves to that, so change the wording to be
more generic.
In the future, the plan is to not use user_data at all, removing the
need for the kconfig altogether.
Also rename the structure that was referenced in the docstring.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
/zephyr/soc/intel/intel_adsp/ace/power.c:46:9: warning: implicit
declaration of function 'cache_data_flush_range'; did you mean
'sys_cache_data_flush_range'? [-Wimplicit-function-declaration]
46 | cache_data_flush_range((__sparse_force void *)
| ^~~~~~~~~~~~~~~~~~~~~~
| sys_cache_data_flush_range
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The symbol DCACHE_LINE_SIZE was not being defined in Intel ADSP
targets.
It fixes the following problem:
/zephyr/soc/intel/intel_adsp/ace/power.c:30:29: error:
'CONFIG_DCACHE_LINE_SIZE' undeclared here (not in a function); did you
mean 'XCHAL_DCACHE_LINESIZE'? 30 | uint8_t
adsp_pending_buffer[CONFIG_DCACHE_LINE_SIZE]
__aligned(CONFIG_DCACHE_LINE_SIZE);
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In SoC imxrt1010, edma channel has separate interrupt entry,
not like the rest of in-tree imxrt SoC series
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Power off the SD card in `DISK_IOCTL_CTRL_DEINIT`, instead of only
waiting for the card to be idle then doing nothing. This is a safer
state for `DISK_IOCTL_CTRL_DEINIT`, which is documented as preparing the
disk to be removed from the system. It also has the advantage of
lowering power consumption while de-initialized.
Signed-off-by: Jordan Yates <jordan@embeint.com>
This commit ensures that the state of the address can be changed from
the Deprecated state to the Preferred state.
Additionally, an issue with improper memory comparison size for the mesh
local prefix has been fixed.
Signed-off-by: Łukasz Duda <lukasz.duda@nordicsemi.no>
The .bin & .hex build output is optional and can be disabled by
CONFIG_BUILD_OUTPUT_BIN/HEX.
Add support for the mandatory .elf build output
to the jlink runner flash command.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Added the battery level status char to bas service
as per bas_1.1 spec. Added BSIM test for BAS service
to test the NTF/INDs of BAS characteristics.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
dhcv4 server was not providing the dns server details to the
client because dns option was handled. Added the dns server
option to be send to the client as response form dhcpv4 server
Signed-off-by: Muhammad Haziq <muhammad.haziq@zintechnologies.com>
TOKITA Hiroshi