Added default configuration files for nrf5 boards so the sample
is building with expected features for these boards.
Would be greater to use OVERLAY_CONFIG instead of files addition,
but that doesn't work from CMakeLists.txt scope.
fixes#24442
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Change the board defconfig to use the provided 24MHz Crystal instead
of the internal resonator.
This improves the clock precision and stability.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Change the board defconfig to use the provided 24MHz Crystal instead
of the internal resonator.
This improves the clock precision and stability.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Fixes the nxp and silabs i2c drivers to decode fast and fast+ mode bus
speeds as 400 kHz and 1 MHz respectively.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
When legacy advertising enable command is issues,
the BT_ADV_ADVERTISING has to be set, because this
flag is checked in many scenarios to see if the
advertising is ongoing or not.
Signed-off-by: Ahmed Shokry <ahmed.shokry@synopsys.com>
Fixing ICFGRn register access with `sys_{read,write}32`
since this register is not byte-accessible.
Type of `val` changed to u32 to match reg width.
Fixes#24339
Supersedes #24422
Signed-off-by: Bartlomiej Flak <flakbartlomiej@gmail.com>
The following PR's #23941#23601 was merged using old boilerplate
inclusion.
This commit updates those tests to use find_package(Zephyr)
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
extern "C" is missing.
This commit adds conditional extern "C" for cpp to
the beginning of the file and brackets the cpp template with
extern "C++"
Signed-off-by: Steven Slupsky <sslupsky@gmail.com>
Update manifest to a version of EDTT that supports receiving this
response in the unknown command response test (HCI/GEV/BV-01-C).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When receiving an unknown command send the unknown command response
as a command status event instead of a command complete event.
A command complete event has no status field, although by convention
all command parameters has a status field as the first parameter the
command status event seems like the more fitting option.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The variables with the STATIC type aren't read.
The commit 877fc59e30 introduce the read of CMAKE_PROJECT_NAME
which could be defined in CMakeCache.txt file like that:
CMAKE_PROJECT_NAME:STATIC=MyProject
If STATIC type is not managed, the CMAKE_PROJECT_NAME isn't set and
CMake is always force to run again
Signed-off-by: Julien D'Ascenzio <julien.dascenzio@paratronic.fr>
The SPIM driver has been converted already. Convert the SPI and SPIS
drivers too. Leave existing Kconfigs in place.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Check the return of i2c_burst_read return and in case of error return
early and propagate the error.
Fixes: #23294
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Now the ARC SecureShield related features are experimental. The ARC
normal application cannot run alone, need the secure service example to
initialize the context and boot.
Here move ARC normal related configurations out of board dir to
avoid the impact of CI test and the confusion to users.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The code generally invoked qspi_wait_for_completion() within a locked
region without verifying that an operation was successfully initiated.
This caused a deadlock whenever the operation failed, e.g. because the
data buffer was not 4-byte aligned. Update that function to take the
result of the operation and either wait for completion or release the
lock, depending on its value.
Also uniformly use the correct type for Nordic HAL error values, and
refactor the erase module so that the correct values are displayed in
the diagnostic when something goes wrong.
Also check the alignment requirements for the flash address and
transfer size, which are highly constrained on this device. This
driver also requires 4-byte aligned data buffer; this is checked in
the Nordic HAL.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Convert from using dts_fixup.h based macros to DT_INST macro. This
lets us remove the dependancy on dts_fixup.h for this driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Changes to Kconfig vs devicetree resulted in uart1 being enabled,
which steals the test pins away from the test.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Instead of various series compatibles, use single stm32 generic
compatible as reference for stm32 flash driver.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add option for low power node automatically subscribe
all-nodes-address to friend sub list.
Fixes: #24009
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
It is useful to know which test fails to semaphore timeout so
add line number of the failing test to assert print.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In tcp_endpoint_cmd() we allocate and then almost immediately
destroy the allocated endpoint. This is quite inefficient so
use a endpoint from stack in the compare.
Separate endpoint allocation from value setting so the caller
can decide how the endpoint union values are set.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Reworked usart_sam driver to utilize new DT_INST macros as part of
this rework we also now get pin ctrl/mux configuration information
from the device tree instead of via Kconfig and defines in soc_pinmap.h
We remove defines from dts_fixup.h and soc_pinmap.h and associated
Kconfig symbols that are no longer needed due to getting all that
information from devicetree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Reworked uart_sam driver to utilize new DT_INST macros as part of this
rework we also now get pin ctrl/mux configuration information from the
device tree instead of via Kconfig and defines in soc_pinmap.h
We remove defines from dts_fixup.h and soc_pinmap.h and associated
Kconfig symbols that are no longer needed due to getting all that
information from devicetree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a set of macros that will create a struct soc_gpio_pin
initialization based on data extracted from device tree. This should
allow replacing the static data in soc_pinmap.h with data coming from
devicetree instead.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add pinctl support for the SAM UART and SAM USART devices. We update
the UART and USART bindings to have pinctrl-0 bindings that are expected
to have 2 phandles to the RX & TX pinctrl nodes.
The pinctrl nodes will have an 'atmel,pins' property that describes the
GPIO port, pin and periphal configuration for that pin.
We add sam*-pinctrl.dtsi files with all the various pin ctrl
configuration operations supported by the given SoC family. These
files are based on data extracted from the Atmel ASF HAL
(in include/sam<FAMILY>/pio/*.h).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The atmel,pins property will be utilized to describe pin mux
configuration. The property will be a phandle-array in which the
phandle points to the given GPIO port the pin is on, the pin number, and
the mux configuration.
This change updates the atmel,sam-gpio binding to support that
phandle-array and updates the associated SoC dtsi files as well.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Cell ID resource was not initialized properly in the Connectivity
Monitoring object, making it unusable from the application.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Move to the new devicetree API and stop using DT_WDT_0_NAME fixup
macros. All existing in-tree SoCs with fixup names are still supported
here via compatible. The watchdog0 alias is also still supported.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Move to the new devicetree API and stop using DT_WDT_0_NAME fixup
macros. All existing in-tree SoCs with fixup names are still supported
here via compatible. The watchdog0 alias is also still supported.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Convert one old style DT_INST_n_..._LABEL macro that got missed to
DT_INST_LABEL(n).
At the same time move driver to also use DT_INST_FOREACH.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When the STM32L4x SoC goes into STOP mode, the SPI device is disabled.
This cause the pins to not be drived anymore (i.e. they are floating)
except through their pull-up or pull-down.
From the logical point of view, the NSS pin is held high by a pull-up
so it's not a problem if the other pins are floating. However those pins
are floating input for the slaves, which increase their power
consumption.
The solution is to hold the state of the pins through a pull-up or a
pull-down. This is already done for the NSS and MOSI pins, but not for
SCK. Fix that by using pull-down on the SCK pin the same way it is
already done for the MOSI pin.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Most of the MISO and MOSI SPI pins of STM32L4 SoCs are configured with
a pull-down except PE14 and PE15. Change them for consistency.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Andrzej Puzdrowski