27fa6d9163
samples: littlefs: add support for H3ULCB and Salvator XS M3
...
Add support of R-Car H3ULCB and Salvator XS M3 boards to
littlefs sample.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
2024-05-01 10:55:11 -04:00
1dc2ca873d
boards: esp32: SDHC support for esp_wrover_kit
...
Configuration files to enable SDHC in esp_wrover_kit
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
2024-04-30 18:23:06 +02:00
919baf84d6
samples: fs: fat_fs: RAM disk in SRAM region for nrf52840dk
...
Add overlay, for nrf52840dk, that reserves RAM in internal
SRAM using the DTS definition.
The sample with such region can be built with the config
file nrf52840dk_nrf52840_ram_disk_region.conf, but, instead
of automatically allocating memory, the Disk driver will
use the pre-defined region provided by the DTS overlay.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
2024-04-25 18:07:16 -04:00
d5e321516a
samples: fs: fat_fs: Add RAM disk sample for nrf52840dk
...
Add configuration for nrf52840dk that allows to create RAM
disk; this configuration does not reserve special region
in RAM using DTS but uses automatic buffer allocation, by RAM
Disk Drivers, according to RAM disk specification in DTS.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
2024-04-25 18:07:16 -04:00
4a4d7584ff
boards: rename and update esp32 related conf and overlay files
...
There are several esp32-based boards that its conf and overlay
files are missing proper renaming to match cpu cluster.
This also removes all _SOC_ name from files.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
2024-04-23 15:36:13 +02:00
9d2cbf6217
samples: subsys: fs: stm:32 fix misuse of zephyr,sdmmc-disk compatible
...
"zephyr,sdmmc-disk" compatible stands for binding with sdmmc subsys which
is not compatible and not used with current STM32 sdmmc driver.
Declaring this compatible is a no op on STM32, so remove it.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
2024-04-18 11:10:36 +02:00
5a0ecb9641
flash: Move dependency on FLASH_PAGE_LAYOUT where it belongs
...
The commit adds dependency on Kconfig FLASH_PAGE_LAYOUT to subsystems
that really require it:
FCB, NVS, LittleFS
and removes direct selection from '*.conf' files where no longer
needed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
2024-04-10 10:01:40 +02:00
5cd077029e
samples: board: esp32: rename board config to meet proper cpu cluster
...
This sample conf and overlay file regarding esp_wrover_kit should
be used only for procpu.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
2024-04-04 13:14:27 -05:00
68a7057513
soc: nxp: imxrt: Prepare imxrt6xx soc for AMP support
...
imxrt6xx are dual core devices featuring an ARM Cortex-M33
core and an Cadence Xtensa HIFI4 Audio DSP.
Currently only m33 core is supported. In order to support
the Cadence DSP we need first to do some code-reorganization
for m33.
We start by moving all cm33 related code to its own directory
and introduce the cpuclusters property in soc.yml file.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
2024-04-03 15:41:16 +01:00
84638156c7
samples: subsys: fs: littlefs: add stm32 configs & tests
...
Add & fix configs & test cases for stm32 boards.
Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com>
2024-03-11 17:55:08 +00:00
f764763f00
samples: littlefs: add qspi nodes for rak5010_nrf52840
...
add qspi nodes with size of 64MB to LFS with automount.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
2024-03-04 14:05:45 +01:00
8dc3f85622
hwmv2: Introduce Hardware model version 2 and convert devices
...
This is a squash of the ``collab-hwm`` branch which converts all
in-tree boards to hardware model version 2 including build system
changes, board updates and soc conversions.
This squash is a combination of the following commits:
ca214745a1 soc: Remove soc_legacy folder and move ARM Kconfig
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
2024-03-02 16:56:33 -05:00
9e13290f8b
boards: arm: stm32 boards has qspi nor flash node
...
Define the reg and size property for the stm32 boards with qspi inside
Refer to the dts/bindings/flash_controller/st,stm32-ospi-nor.yaml.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
2024-02-02 13:48:18 +01:00
c7ce871a04
tests: exclude `renode` from tests requiring unsimulated peripherals
...
Physical boards work on these tests but some of the required
peripherals are not simulated by `renode`, executing the tests
with renode-simulated board in CI will fail.
Exclude `renode` simulation from these tests.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
2024-01-08 16:17:43 +00:00
1ddb931fa8
samples: subsys: fs: fs_sample: adding support for fat_fs app
...
adding support for fat_fs application agilex5 platform
Signed-off-by: Murlidhar Roy <murlidhar.roy@intel.com>
2023-12-18 15:00:38 +01:00
868489b98e
samples: Enable any which runs in native_posix also in native_sim
...
Enable the remaining samples which run now in native_posix also
in native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
2023-11-20 12:02:48 +01:00
2c5f5bfd0a
samples: fs: fat_fs: support on stm32h747i-disco board
...
This patch allow demonstrating fat_fs sample application on
stm32h747i-disco board with SD card.
Build fs_sample using following command
west build -p always -b stm32h747i_disco_m7 \
samples/subsys/fs/fs_sample
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
2023-11-08 10:08:19 +01:00
ec031029f4
samples: fs: littlefs: sdmmc: remove fstab and fixed partition
...
For littleFS, the fstab entries in DTS are ignored currently.
So remove the overlay entries for the same. Also fixed-partitions
can't be used for sdmmc-disk. So remove the same. We just need to
have sdmmc node with zephyr,sdmmc-disk compatible string to have
littleFS working on disk.
build littleFS sample as follows:-
west build -p always -b stm32h747i_disco_m7 \
samples/subsys/fs/littlefs/ -- \
-DOVERLAY_CONFIG=boards/stm32h747i_disco_m7.conf \
-DCONF_FILE=prj_blk.conf
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
2023-11-07 14:11:06 +01:00
b235372546
samples: fs: littlefs: add sample on stm32h747i-disco board
...
This adds the required conf and dts overlays required for the
application on stm32h747i-disco board.
Also moved CONFIG_SDMMC_STM32_HWFC option from prj_blk.conf to
nucleo_h743zi_blk.conf as that is STM specific option.
Build the application as
west build -p always -b stm32h747i_disco_m7 \
samples/subsys/fs/littlefs/ -- \
-DOVERLAY_CONFIG=boards/stm32h747i_disco_m7.conf -DCONF_FILE=prj_blk.conf
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
2023-11-03 11:45:47 +01:00
4f1cd0e428
doc: Migrate subsys/ code samples to new Sphinx extension
...
This migrates the subsys code samples to the new Sphinx code-sample
extension, making it easier to find relevant samples when browsing
API reference.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
2023-09-21 09:28:31 +02:00
f67dd39bb2
drivers: ramdisk: use devicetree to instantiate RAM disk
...
Rework RAM disk driver to be configured using devicetree and
support multiple instances.
This patch also removes a copy of the RAM disk driver,
tests/subsys/fs/fat_fs_dual_drive/src/disk_access_test_drv.c,
that was there for testing multiple disk drivers support.
Bonus: one SYS_INIT() less and a memory region can be exported to the
host.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
2023-09-18 17:36:50 +02:00
30cd9a22cf
doc: fs: samples: Use new Sphinx extension to document samples
...
Use the new code-sample directive and roles to document the filesystem
samples so that they show up as "Related samples" when browsing the API
documentation.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
2023-09-14 15:07:12 +02:00
7f201f4ccc
samples/tests: littlefs: tag littlefs samples/tests
...
Tag with required module name to make the tests run when the module has
changed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2023-08-24 13:41:26 -04:00
ff9ebcb946
samples: fs: rename shadow variables
...
Rename shadow variables found by -Wshadow.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2023-08-22 11:39:58 +02:00
16183f665e
samples: subsys: fs: create common fs sample
...
Sample for FAT fs is reworked to run also with Ext2 file system
Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
2023-08-03 12:22:01 -04:00
87e40d8b6d
samples: enable flash samples for mr_canhubk3 board
...
Various samples enabled to use the on-board QSPI memory.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
2023-07-26 09:44:14 +02:00
dd733493f5
samples: fs: littlefs: make sample workable for mmc disk driver
...
The LittleFS sample may be used for both SDMMC and MMC disk drivers,
so make it possible to work with different volume disk driver names.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
2023-06-23 09:20:10 +02:00
53843c6464
samples: fat_fs: Add support for MG100 board
...
Add overlay so the sample can be built for the MG100.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
2023-06-19 08:51:27 +02:00
e0e7f5888f
fs/littlefs/sample: Increase stack size
...
Increase stack size to prevent sample crashes.
Fixes #57525
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
2023-06-07 13:38:44 -04:00
04827ba71f
tests/samples: use integration_platforms more where it makes sense
...
Use integration platforms to limit churn and build time in PR CI .
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2023-05-26 17:52:02 -04:00
1120934874
doc: samples: update OVERLAY_CONFIG to EXTRA_CONF_FILE
...
Update rst files to use EXTRA_CONF_FILE instead of OVERLAY_CONFIG.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
2023-05-23 16:40:21 +02:00
a23b316e29
samples: littlefs: remove flash map configs when we use block device
...
We don't need anymore enabling of Flash map for building littlefs
sample with block disk device config.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
2023-05-19 15:53:29 +02:00
93b63df762
samples, tests: convert string-based twister lists to YAML lists
...
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2023-05-10 09:52:37 +02:00
9f0bc06468
samples: mimxrt1010_evk: exclude various tests
...
Disable various samples because they require certain digital signals
from the Arduino header, which are not connected when the board is
shipped and therefore not defined via the connector gpio-map.
Signed-off-by: Stephan Linz <linz@li-pro.net>
2023-05-08 09:58:30 +02:00
4134858868
tests/samples: Replace minimal libc malloc configs with common ones
...
With the minimal C library malloc implementation moving to libc/common, all
of the related Kconfig variables have also changed. Update uses within the
tree.
Signed-off-by: Keith Packard <keithp@keithp.com>
2023-04-27 20:17:24 +09:00
1929eb3af7
drivers: sdhc: add support for using CPOL/CPHA SPI clock modes
...
Make it possible to use CPOL/CPHA SPI clock modes with the SDHC driver.
Some cards require the clock to switch to low when not active.
Signed-off-by: Łukasz Hejnak (LeHack) <lehack-ghub@lehack.pl>
2023-04-26 20:07:53 +02:00
0b90fd5adf
samples, tests, boards: Switch main return type from void to int
...
As both C and C++ standards require applications running under an OS to
return 'int', adapt that for Zephyr to align with those standard. This also
eliminates errors when building with clang when not using -ffreestanding,
and reduces the need for compiler flags to silence warnings for both clang
and gcc.
Most of these changes were automated using coccinelle with the following
script:
@@
@@
- void
+ int
main(...) {
...
- return;
+ return 0;
...
}
Approximately 40 files had to be edited by hand as coccinelle was unable to
fix them.
Signed-off-by: Keith Packard <keithp@keithp.com>
2023-04-14 07:49:41 +09:00
5712fcb9fb
samples/fs/fat_fs: Enable nrf52840dk_nrf52840 for twister
...
nrf52840dk_nrf52840 configurations have been added as build_only
configurations.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
2023-04-07 13:26:18 +02:00
bfd65f290d
samples/fs/fat_fs: Readme update
...
The sample now support's setting up FAT FS on devices without
SD card access and this new ability requires update in documentation.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
2023-04-07 13:26:18 +02:00
e89ffb5a6f
samples/fs/fat_fs: Allow creating entries for demonstartion
...
The commits adds Kconfig option CONFIG_SAMPLE_FATFS_CREATE_SOME_ENTRIES
which causes the sample to attempt to create one file and one
directory, in case if listing does not show anything, just
to demnonstrate how FAT FS operations work on internal flash.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
2023-04-07 13:26:18 +02:00
f079225637
samples/fs/fat_fs: Add support for nrf52840dk_nrf52840
...
The commits adds support for nrf52840dk_nrf52840 with two additional
configurations:
- with FAT FS on internal SoC flash
- with FAT FS on QSPI connected MX25
In case of SoC configuration there is re-configuration of internal
partitions done, doe to need for at least of 64kiB for FAT FS.
The QSPI configuration only defines additional partition on
external device.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
2023-04-07 13:26:18 +02:00
72f2b01e5a
samples: Update fs format sample README
...
Update the README.md to README.rst format and
rephrased parts of the description.
Signed-off-by: Simon Hein <Shein@baumer.com>
2023-04-05 19:32:52 +02:00
bfdaa9ad61
samples: fs: littlefs: Fix typo in overlay selection
...
Corrected DTS_OVERLAY_FILE to DTC_OVERLAY_FILE.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
2023-03-31 09:19:33 +02:00
842c14ceda
samples: fs: enable littlefs sample for LPC55S69
...
LPC55S69 flash requires all writes be in multiples of 512 byte blocks.
Configure littleFS sample for these requirements when building targeting
the LPCXpresso55s69 EVK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
2023-03-02 10:57:31 +01:00
447e2c1859
samples/fs/littlefs: Separate SPI, QSPI and SoC nrf52840dk configs
...
Add support to run the sample on nrf52840dk_nrf52840 using
internal SoC flash, and external mx25 device over QSPI or SPI.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
2023-02-23 09:03:58 +01:00
204758b5d9
samples: fs: littlefs: Add stm32l562_dk and b_u585i_iot02a
...
Add configs and overlays to run boards stm32l562_dk and b_u585i_iot02a.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
2023-01-10 09:23:59 +01:00
792469aae9
yamllint: indentation: fix files in samples/
...
Fix the YAML files indentation for files in samples/.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
2023-01-04 14:23:53 +01:00
9b4aa2d553
samples: fs: Add sample using fs_mkfs function
...
Provide a demo which uses newly added fs_mkfs function.
Signed-off-by: Franciszek Zdobylak <fzdobylak@internships.antmicro.com>
2022-12-05 15:36:00 +01:00
ba7d730e9b
tests/samples: use integration_plaforms in more tests/samples
...
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2022-11-29 16:03:23 +01:00
15cc076126
samples: subsys: littlefs on nucleo_h743zi
...
This commit fixes the overlay file for running the
samples/subsys/fs/littlefs on the nucleo_h743zi platform.
The storage_partition is moved to the qspi_nor flash
instead of the internal flash.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
2022-11-05 19:57:40 +01:00
Mykola Kvach