The test test_thread_monitor fails when a platform enables
the IPC console.
This commit fixes the test to count the IPC console fiber
if it is enabled in the project or the platform.
Change-Id: I9faf9d120b35d9211e558be8f5788885f30c3081
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
This line was missed when the task IRQ APIs were deprecated
by commit a83f895dd5.
Change-Id: I0135eebb2f7bd0991364fdaab8a0a1fd6981d50d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Incorporates the brief discussion of device driver support into
the Device Drivers document, so that the driver material is all
in one place. (Also converts a few unprintable characters in the
latter document to spaces, since they appear to have been used
by accident.)
Removes the empty discussion of networking support, to avoid
duplicating stuff already covered in the Networking document.
Change-Id: Ia5b8a92ade72a0634ee142afb45928016442d7dd
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now use a standard routine for identifying which block set to use,
rather than duplicating the identification code in multiple places.
Change-Id: I2f6577879c23183f3f91e4418d1ea0b2f6eec184
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises algorithm to call an existing routine to free an allocated
block, rather than duplicating the logic to do the freeing.
Also enhances comments to make it easier to understand what is
going on.
Change-Id: Ie7a83a8a2e978e8a685c27e07acb5b70aea37afa
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises algorithm for deallocating an existing block to make it
more compact (and efficient). Address calculation is simplified
and unnecessary error checking is removed (& replaced by asserts).
Also enhances routine name and comments to make it easier to
understand what is going on.
Change-Id: If1803ee09c8f4f73693c0cff9e433a7938f14398
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Enhances comments to make it easier to understand what is going on.
(Doesn't change actual defragmentation algorithm.)
Change-Id: I294f55b8f233d88c01ce30ba9ccff88000dc7936
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Enhances routine name and comments to make it easier to understand
what is going on. (Doesn't change actual allocation algorithm.)
Change-Id: I7d982ed8eeda3a2edd4602c5a10003aa8532457d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises algorithm for allocating an existing free block to make it
more compact (and efficient) by using the same logic to handle the
allocation of any block within a quad-block.
Also enhances routine name and comments to make it easier to
understand what is going on.
Change-Id: I55ca513e6f85df2b548502262e4dbe6bb272596b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Converts check for a request for an impossibly large block
from a run-time check to an assertion. (The run-time check logic
was faulty anyway, since an excessive request would result
in a negative value for "offset", which would then get used
as an array index!)
Also enhances comments to make it easier to understand what is
going on.
Change-Id: I3faa86be177dcbc76912e23fabc2d24724fcba18
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Makes a couple of minor optimizations to initialization algorithm:
- Now initializes block status array for largest size blocks once,
rather than twice.
- Doesn't initialize "count" field of block size descriptors to zero,
since sysgen ensures that this happens automatically.
Also enhances comments for initialization routine to make it easier
to understand what is going on.
Change-Id: I00d907c0f2a86f5b6ea8a63475b40074fe89357c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates memory pool field associated with a capability that was
never implemented. (This field was initialized, but never subsequently
referenced.)
Change-Id: I58cf8c4bb846a66b4c8754654ffc3ff55abcff7f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
No longer necessary since the host tools compile natively now.
Change-Id: Ibe6f66fa79498678bddc25f69f799555d181ea7f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's not clear why this was forced in the first place.
Change-Id: I95c5e21ac0861a7b224ac9715bc5691c97922fe4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We no longer assume pointer sizes are the same between host and
target, and use stdint defintions to size things.
Change-Id: Ie4dc41c60d62931fdb3d1764ade01c16a64d0b54
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Relocates material that outlines the structure of a Zephyr application
so that it appears at the beginning of the "Application Development
Primer". (i.e. The primer now tells the reader the file structure of
an application, then explains how to create these files.)
Revises the description of the MDEF file to make it a bulleted item
(like the other file types are) and improve readability.
Change-Id: I9f003b8317257c927bea752da55cc434f957592c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Debug macro definition at this file was repetitive and has been
superseded by new system logging API. Furthermore it was not being
used on this .c file.
JIRA: ZEP-311
Change-Id: Id5828d1144fa03cc24f100ae94ecc596502c1131
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Clock control drivers are now using new system log macros. also update
the Kconfig variable to be a level rather than a bool.
JIRA: ZEP-311
Change-Id: Ia64e79e4e083df580861f64c661f8dbaa8a3985d
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Relocates material that describes the most fundamental terms used
in Zephyr documentation so that it appears in the "Introducing Zephyr"
document. (i.e. Ensures that the terms are defined before they are
used in the "Getting Started Guide" that follows.)
Transforms the material into a definition list to make it easier
for readers to locate and understand the mateial. Revises the text
to give it a consistent look-and-feel.
Change-Id: I0187d99b1bdac37397a4c907d57bc1f24d7698e7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Relocates the introductory material for Zephyr into a new document,
so that it can be more easily located by users. (Previously this
info couldn't be accessed from the list of documents on the left hand
side of a web page; instead, you had to click on the "Documentation"
tab at the top of the page, which is non-intuitive.)
Change-Id: I1e1f78162a314b958789fcef57fc864336007f3c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Moved the DesignWare ARC EM Starter Kit information from
em_starterkit.rst to the Zephyr wiki.
Change-Id: I2d5343d7bf03c69f5c8365e955dbb86980b4c5d1
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved board content from arduino_due.rst to the Arduino
Due Zephyr wiki article.
Change-Id: I438d674b43836beb45a0690d86327b9526c9eddf
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Used by ARC, ARM, Nios II. x86 has alternate code done in assembly.
Linker scripts had some alarming comments about data/BSS overlap,
but the beginning of BSS is aligned so this can't happen even if
the end of data isn't.
The common code doesn't use fake pointer values for the number of
words in these sections, don't compute or export them.
Change-Id: I4291c2a6d0222d0a3e95c140deae7539ebab3cc3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Change CDC example to read and echo all the received data
before waiting for a new read interrupt.
Change-Id: I21e1646fb20a2c4f7aea2b396b633a4e0ae429fc
Signed-off-by: Adrian Bradianu <adrian.bradianu@windriver.com>
Quark SE USB controller is always storing data in the FIFOs per
32-bit words. Change Bulk Out handler to read data per 32-bit words.
Change-Id: I871278a754895edc5c7a395797b6dab0904bcdf6
Signed-off-by: Adrian Bradianu <adrian.bradianu@windriver.com>
Protect FIFO writes against other USB register accesses.
According to "DesignWare Cores USB 1.1/2.0 Device Subsystem-AHB/VCI Databook":
"During FIFO access, the application must not access the UDC/Subsystem
registers or vendor registers (for ULPI mode). After starting to access a
FIFO, the application must complete the transaction before accessing the
register."
Change-Id: I2aed833acaa2970310b6fd48f41a95bee2182ec1
Signed-off-by: Adrian Bradianu <adrian.bradianu@windriver.com>
Designware, Amtel and Quark SE i2c drivers are now using new system
log macros. also update the Kconfig variable to be a level rather than
a bool.
JIRA: ZEP-311
Change-Id: Iac009b20fb74deb8ce72098378651bbec3b2ef17
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Tags should be separated with spaces no with comma.
Change-Id: I5381200bcd0caf59f3601ec849d698966c734a28
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Groups top-level documents so that related documents are adjacent.
Also re-orders things so that documents for newcomers appear before
documents on more advanced topics.
The rationale behind the resulting order is described below:
Getting Started Guide
- Enables a newcomer to access & try out Zephyr by running a sample
application using QEMU.
Supported Boards
- Enables a newcomer to try out Zephyr by running a sample application
using actual hardware.
- Also lets newcomers know which boards are currently supported.
Zephyr Kernel Primer
Device Drivers and Device Model
Subsystems
- Describes the various components of the Zephyr kernel.
- Lets a developer know what is available when they are *designing* code.
API Documentation
- Describes the various APIs of the Zephyr kernel.
- Lets a developer know what is available when they are *writing* code.
Application Development Primer
- Provides the info needed for a developer to create a new application
using Zephyr.
Contributing Code
- Tells a developer how to contribute code back to the Zephyr project.
- Advanced topic.
Porting Guides
- Provides guidelines for porting Zephyr to a new architecture.
- Advanced topic.
Build System User Guide
- Covers writing Kconfig options, and also contains reference guide.
- Advanced topic.
Change-Id: I8ecb4953c788e843028d1e8778be1ef1aee6c175
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Pushing this to see what fails as its a similar fix to the one Flavio
pushed. Yet in local building with sanitytest not seeing any issues
Change-Id: If42c13b0c1827fe89fb332ac6c40a14a76553330
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Moved the QEMU x86 information from qemu_x86.rst
to the Zephyr wiki. Also corrected a typo in
qemu_cortex_m3.rst.
Change-Id: Ic7ac8a1ab59018f25466c9031ce465973d6bdd8f
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved the QEMU_Cortex_M3 information from qemu_cortex_m3.rst
to the Zephyr wiki.
Change-Id: I4899c562844f8fc90096aea45b14a80f40791239
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved the OLIMEXINO-STM32 information from the
olimexino_stm32.rst file to the Zephyr wiki.
Change-Id: I97aa1b400bd65bbe53bb58e635a789cb325c3795
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved the nRF52-PCA10040 information from nrf52_pca10040.rst
to the Zephyr wiki.
Change-Id: I0069b9e720a39b515c8ca612343e3f3410f4a77a
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
This replaces the use of delayed fiber with delayed work which doesn't
require extra stacks.
Change-Id: I3db0c168baabea2503163e26020bf5e4971ce584
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds initial timeout handling as described in the spec:
BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part A] page 126:
'The value of this timer is implementation-dependent but the minimum
initial value is 1 second and the maximum initial value is 60
seconds. One RTX timer shall exist for each outstanding signaling
request, including each Echo Request. The timer disappears on the
final expiration, when the response is received, or the physical
link is lost.'
Note: As for the actual interval used they are based on the values used
in Linux but in case of disconnect the minimum of 1 seconds was used
to follow the text above.
Change-Id: Ib98899c3ff07334955aee9c8fb53b1b89ba7bf31
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Accourding to the spec request should have a timeout of 30 seconds:
BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part F] page 480:
'A transaction not completed within 30 seconds shall time out. Such a
transaction shall be considered to have failed and the local higher
layers shall be informed of this failure. No more attribute protocol
requests, commands, indications or notifications shall be sent to the
target device on this ATT Bearer.'
Change-Id: I5e5b9fb008d3019831c5f6cc3bd4c2b85dd6b90a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Moved the Minnnowboard Max information from minnowboard.rst
to the Zephyr wiki.
Change-Id: I97c2090e3a76e2ab6a9ab1e5f338fb4c3ffb0715
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved the Galileo Gen1 and Gen1 info from galileo.rst
to the Zephyr wiki.
Change-Id: I2210ab98429efb55be5ef3e47096842dfdbce16e
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Signed-off-by: viggo.jf.intel.com <evanx.couzens@intel.com>
Moved the FRDM-K64F information from frdm_k64f.rst
to the Zephyr wiki.
Change-Id: Ibf5431d21bb82af1b9eebc7b693b88d774247369
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
16 bit handles have to be converted to host order.
Change-Id: Iae5d9d79bacd90cd5b42a98d02165ec75bf1272e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Correct ADC resolution definition and default value in Kconfig.
QMSI uses different definition for sensor. But, Kconfig did not
reflect the difference.
Change-Id: I8e57aa5670bff0e5b29bf0772159834e4b902d88
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Use the function provided in misc/util.h to do the sample
conversion.
Change-Id: I21179982b6001bf79448e4eb289e9cffaf97f3fb
Signed-off-by: Mariusz Ryndzionek <mariusz.ryndzionek@firmwave.com>
Moved the arduino_101_ble.rst content to Zephyr wiki:
https://wiki.zephyrproject.org/view/Arduino_101#Blue
tooth_firmware_for_the_Arduino_101
Change-Id: I361f124967da277aba835f39294a36718cf990a8
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
This allow the PWM QMSI shim driver to implement the set duty cycle
API, and correct the behavior of Set Value
Jira: ZEP-69 ZEP-156 ZEP-158
Change-Id: I47744958fed889116fbb5024343ea00f76ed7706
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The doc build needs not the HTML or Latex documentation generated by
doxygen, as sphinx takes only the XML. Disable them to use less space
and speed up the build.
Change-Id: I51974449262fc5b45c6c2b41aad54365cceac341
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Juan Manuel Cruz