support the configurations which apply for LVDS pads
+ termination resistor
+ current reference control
+ rx current boost
Signed-off-by: Tu Nguyen Van <tu.nguyenvan@nxp.com>
Configures pins for the SPI instance attached to the Arduino connector
to enable using this board with the eval_adxl372_ardz shield.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Configures pins for the GPIOs attached to the Arduino connector to
enable using this board with the eval_adxl372_ardz shield.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Adds a new shield definition for the Analog Devices EVAL-ADXL372-ARDZ
accelerometer shield. This shield provides support for an ADI ADXL372
3-axis accelerometer over an Arduino SPI connector.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
IMXRT1062 bootrom reads boothdr initial vector table
from 0x60001000. In the CMAKE scatter linker scripts we put multiple
sections at offset 0x1000 in the rom. In linkers other than LD, we are
not guaranteed a particular order when placing these.
If we specify FIRST we can count on the .ivt coming first. The other
positions aren't as crucial.
From IMXRT1060RM.pdf 9.7.1
> The location of the IVT is the only fixed requirement by the ROM.
> The remainder or the image memory map is flexible and
> is determined by the contents of the IVT.
Signed-off-by: Robin Kastberg <robin.kastberg@iar.com>
This commit increases the range of value for the
OPENTHREAD_CLI_MAX_LINE_LENGTH option to the maximum allowed.
The previous range may have been insufficient for Openthread vendor CLI
commands.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Use EXTRA_CONF_FILE in documentation .rst/.md files,
that replaced deprecated OVERLAY_CONFIG since the Zephyr v3.4 release.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
.conf files added to enable INPUT_ESP32_TOUCH_SENSOR during sample build.
The absence of these files incorrectly prevented the input_dump sample
build from failing due to missing required hal files.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
The production version of the nRF54L15 SoC is now available, so remove
the initial Engineering A (EngA) preview version.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
A bunch of copy-paste mistakes when adding the nRF54L15 DK added stale
references to the Preview DK (PDK).
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
RFU bits has to be ignored according to the spec; In addition,
some MediaTek devices seems to have it set (by mistake I assume),
so having the check means we cannot sync to these devices
Signed-off-by: Troels Nilsson <trnn@demant.com>
Adding a brief fly-in of the main concepts of the
implementation of link layer control procedures handling
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Currently, the camera fixture test can only tell whether data are dumped
onto memory. This is to check further if the image content is correct.
The algorithm is rather simple: compare the average color of each bar
of a generated pattern with a predefined target in CIELAB76 color
space (which is nearly perceptually uniform).
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The logs that the fixture test are based on are not printed anymore due
to recent changes from "printk" to "LOG_DBG". Change the log level so
that it can work again.
Remove "Capture started" as it is not a relevant test regex. Logs are
sometimes not correctly printed in the console, for example, we can see:
DEBUG - DEVICE: muart:~$ [mapture started
As "Capture started" is a one-time log, fixture test will then fail due
to timeout.
Also, consolidate other regex.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Add a test that checks behavior of
CONFIG_BT_CONN_CHECK_NULL_BEFORE_CREATE Kconfig option.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit adds a warning and a Kconfig option to `bt_conn_le_create`
and `bt_conn_le_create_synced` functions which are meant to warn a user
of a potential leakage of an active connection object.
This change is implemented due to frequent incorrect use of the
connection pointer where a pointer to an existing connection object
is overwritten by `bt_conn_le_create` and `bt_conn_le_create_synced`
functions which in turns leads to sporadic critical bugs. See
https://github.com/zephyrproject-rtos/zephyr/pull/78284#discussion_r1754304535
for more details.
The Kconfig option is introduced instead of always returning the error
to not affect current implementations. However, it is recommended to
keep this option enabled to avoid potential bugs.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Some devices may belong to >1 power domain, so with the current design
this is something not possible to describe. It's worth to note that
Linux also uses the `power-domains` naming scheme, not `power-domain`.
This patch also introduces `power-domain-names` so that each entry in
`power-domains` can be given a name if needed. `#power-domain-cells`
is now required as well.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Current code does no longer support
the non monolithic feature.
Hence, removing unnecessary code.
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
This config will be used to indicate if a platform
has the support for monolithic BT feature.
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
Enabled the MRT at the board level for
mcxn947. Enabled the clocking for the MRT
in the clock control.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Change integration_platform -> platform_allow to not build the
shell test suite for all supported boards.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
This adds promiscuous mode support functions into build for filter
operation when the configuration CONFIG_NRF70_PROMISC_DATA_RX
is enabled.
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
This set of changes brings in promiscuous mode filtering support in
driver. Since, firmware would be unable to filter packets due to
connection issues, the filtering support for promiscuous mode is
moved to the driver.
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
Moved MCUboot trailer's status erase ahead any write operation,
which is step which helps with addition of support for devices
don't require explicit pager erase.
For these kind of devices flattening of mcuboot image status in
the trailer was introduced.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Driver now uses multi-instance PDM nrfx API and
defines PDM device based on available instances.
It also introduces calculating PDM frequency using
prescaler, present on nRF54L15 FP1.
Updated nrfx API version changed to 3.7 to use the
new PDM API.
Signed-off-by: Michał Stasiak <michal.stasiak@nordicsemi.no>
New PDM, some present on nRF54L15 FP1, instances have
been added. Modified condfiguration file for nRF5340,
which now requires PDM0 instance.
Signed-off-by: Michał Stasiak <michal.stasiak@nordicsemi.no>
Added dedicated nrfx configuration files for
nRF54L15 FP1, which differ from ENGA variant with
inclusion of PDM.
Signed-off-by: Michał Stasiak <michal.stasiak@nordicsemi.no>
Doc and .yaml descriptions shall mention retained_mem
in supported features on affected boards.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
retained_mem driver is now compatible with nrf54h20 cpuapp & cpurad.
Also add missing .conf for nrf54l15.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
nRF54H20 cpuapp and cpurad are now compatible with retained_mem,
so explicit list of supported devices can be removed.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Tests for prometheus library support.
It contains integration and unit test
each metric types.
Signed-off-by: Mustafa Abdullah Kus <mustafa.kus@sparsetechnology.com>
The sample uses the Zephyr HTTP server library
and demonstrates the Prometheus metric
server node. Prometheus client library
runs as a pull method. The sample contains
the HTTP request counter and increases
when refresh path of '/metrics' from the browser.
Signed-off-by: Mustafa Abdullah Kus <mustafa.kus@sparsetechnology.com>
Tu Nguyen Van