Make sure the etimers are triggered in main event processing
function in tcpip.c
Change-Id: Ib521b9291c768245a9f35f3502b3b173abe08ee9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The Contiki etimers need polling which is handled by this fiber.
This fiber sleeps until next etimer is to be triggered. If the wakeup
time is long, we wait max 60 sec so that new timers can be triggered
also. This 60 sec timeout might be too long and require tweaking when
we know how the system behaves.
If there are no etimer event in the system, then the timer fiber
will only sleep 2 seconds before checking the timers again. This
interval might need tweaking also.
Change-Id: If34b97073882d8b273941cfb0be36df6aac97cf8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add sample radvd.conf and instructions how to use it in README
file. This is needed if user wants to use IPv6 SLAAC (stateless
address auto configuration) when using qemu setup.
Change-Id: I3c9c34cfcc1bc88117a1c70a5d3ef6b5e56739f1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allocate a new TX net_buf when sending neighbor solicitation
message instead trying to use the existing RX net_buf. This
simplifies and unifies the RX and TX buffer management.
Change-Id: Ia1c42f7fef720ad85fe1c599c3c2ec9ea2c024b5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When sending IPv6 packet, make sure that the net_buf is valid.
Change-Id: I0027f42f307c09b3add42f430abf759bd88d63c5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allocate a separate buffer when sending RS, RA and NS ICMPv6
messages to the network.
The ICMPv6 messages are:
RS = router solicitation
RA = router advertisement
NS = neighbor solicitation
Change-Id: Ibe5a1701f78f72dce6460f77e9f659b16c355640
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Debug prints were missing line feeds + spaces in neighbor
discovery code.
Change-Id: I1373af38cc7eae103d1a1da527430f2eb63e6b7a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User is able to disable IPv6 neighbor discovery.
Normally ND should be enabled but for testing purposes
the ND can be turned off as it simplifies the network
setup.
The default value atm is not to run ND because
we do not have a proper network setup. If user is
running qemu image, then ND should be disabled because
ND does not work properly with tun device.
Change-Id: I0ab7d6ee2ea3bc70918d9adf6f44473f71b3bd29
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Neighbor solicitation message sending had a typo.
Change-Id: Ia2a8b5c0eef60acc093463eb24f33bbe8fb93421
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now we can wakeup properly if there are multiple Contiki etimers
in the system.
Change-Id: I356818f4b79427c9bf26afca31b1a0766760ca3d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The clock_delay() function sleeps now correctly either
in micro or nano kernel.
Change-Id: I1df71b64c5f0b46d963ee117252e41be3ddfb1df
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IP networking depends on CONFIG_NANO_TIMEOUTS and
CONFIG_NANO_TIMERS support so select them automatically
in Kconfig.
Change-Id: Ib3a86ca5a2006da545bed8c13b631d6a8c45ea99
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This variable is not used outside of c file.
Change-Id: I89b34fb6dd2cdd9dd111b6e33829f170d0ba00ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Adds HCI layer event defines to be used by LE Connection Update
Complete event handler.
Change-Id: I5c3502054acd4f838a33c55df8d1eefe1acec6b4
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds possibility of setting advertise mode.
If no advertising mode is set, use default value (discoverable).
Change-Id: I86456ca52ad54a2fd4e4c6443a79087ddeb99ec6
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Bluetooth shell now supports advertising type set while starting
advertise.
Change-Id: I1e672b4c9315368dcef38398834acc5541c1843b
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This makes shell a bit more convenient to use.
Change-Id: I50490eb3cf9434723737a71fb382316876ba6291
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This commands print list of all available commands.
On unknown command only short info about 'help' command is
printed.
Change-Id: I780f4fd8da7292192260a0e0af8815fe4e385ae2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Reduce usage of static variables making code easier to follow.
Also improve robustness in case of too many parameters provided.
Change-Id: I6a3f0162a4fb301479ed36c54ceca2967bb7e389
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If empty input was provided simply reprint prompt instead of printing
uage information. This makes it similar to linux shell.
Change-Id: Ie4d9e1e7cb011ddf14f490188335ddc44289ffcf
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Style fix - add missing brackets for single instruction if statements.
Change-Id: If37f886949fb8587d6973a19bd2df92af03f7a87
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
The minimal/start valid handle value is 1.
Change-Id: Ief3be01d0bf76193350b7632aedebc559d368810
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Use more robust approach when registering shell callbacks. Instead of
allocating maximum number of callbacks use exact memory which is
needed.
Change-Id: I96db75375e8d24df328adc0622c7817a3328f860
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Att data structure passed to read_type callback wasn't set properly
with connection data. This cause parsing att struct set to 0 (casted
in cb, set in att_read_type_rsp). Wrong att data caused parsing wrong
mtu size and whole conn structure.
Change-Id: Ib0aa4b8edca4965afd746e7186a08cfa34e62cf3
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
UUID format in 4-byte hex is more readable format than unsigned int.
Change-Id: I5e7fa3771d628705b9991c0064c102313573b8e4
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
The net/ip/contiki/tools directory was not in proper place
as it contains also non Contiki code. The net/ip/tools is
a more suitable location.
Change-Id: I1eb621680d4247d56d67ea977120f3c67c013599
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The observe client routines need to allocate a net_buf that
will hold the sent UDP data.
Change-Id: Ia04aacdde266aa93de1b9941eeed0c8292ca83b8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When a transaction is retransmitted, we need to allocate a
net_buf that will hold the actual UDP packet to be sent.
Change-Id: Ie0d51694b5531938cd1da5c330a308e3e9fd1764
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add coap_context_connect() function so that client can use
it both in DTLS and normal connections.
Change-Id: Ibd8cff904e79a97f97ed6ff20d92078eff110e35
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use only integer arithmetics when calculating the timeout
value.
Change-Id: Ifc61e1eee4a9a680e9c4f8c89f146417d6cc5ba4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the transaction allocation fails, then print additional
information in order to find the place of the failure.
Change-Id: Idd59969b2c5eff53170b51a471583ec8c837416a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The mid needs to be init from server and client code so
create a new function for it.
Change-Id: I662b64c207ac69288648ffbdc950896edd5ade52
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor etimer and timer Contiki APIs to use the native
Zephyr timers. The Contiki way did not work well anyway
as we do not really have the process concept in Zephyr.
Change-Id: I14743707f3cf43eddfe914717b069204cde4bd65
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The clock_seconds() API returned wrong number of seconds since
initialization.
Change-Id: I4f0f6197327f4ebe12e2c37588d9611ec40d7643
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print additional information about how many net buffers
are available when allocating (get) or de-allocating (put)
them. The prints are only available if Kconfig option
CONFIG_NETWORKING_WITH_LOGGING is set.
Change-Id: I85e6a5813356d8fe00f0ba633c3ebf5379e56bff
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Have a separate network buffer pool for received and transmitted
data. This way incoming packet flood cannot prevent from sending
IP packets out.
Change-Id: I2aae3bcb4ea63f36355f758de44532b167edfdb8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The CoAP test server runs in Zephyr and it receives CoAP messages
sent by coap client. The server can receive both plain or DTLS
encrypted CoAP messages. The server has various resource plugins
available but currently activates only three that are needed
by coap-client tester.
Change-Id: I6465a3a057eaf8b412699bba57bf7213548f0377
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add simple CoAP client that can be used to test
the CoAP server running in Zephyr inside qemu.
The coap-client is run in the host.
Change-Id: I50e4b0e13aa657a0d805b0438050b8b9187d3839
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adding CoAP client support to Kconfig and Makefile.
Change-Id: I857169feac8b6c4347af4369b0cdfb806c6aedb0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add CoAP switches to Kconfig and enable them in Makefile.
Change-Id: I3d5e18f34c0ab0853838c2e883748dd4ae62aed2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The use of CoAP context is needed as we do not have
global buffers any longer. This commit adds support
for CoAP context when user does not have DTLS enabled.
Change-Id: Ief716e2a3290bd1f7e5a3286a20deba690b3c1c5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make the DTLS code in CoAP context to work in Zephyr.
Change-Id: I0c9cd30a02fa6b3f0221f78e1dadd1d476bad646
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Initial port of er-coap code into Zephyr.
Change-Id: Icb45903387eb08418a3610c1bd0933a9a9c6f8dd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the debug macros from uip-debug.h so that they are
in one place.
Change-Id: I342d727d4c6af9a655729db6245668968bee4b07
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is originally from git@github.com:YanziNetworks/netcontiki.git
commit e7d7ee5b142fb7b0695677dac9cc1899620b0fe0
Change-Id: I606b26420b9df841f03bc955039f25970553e481
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is originally from git@github.com:YanziNetworks/netcontiki.git
commit 02bb8eed066c012b4b6033cbe17a31ff15879a24
Change-Id: I4b19302266a6ff562532c493bb34b7cd9a27ee5d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Jukka Rissanen