A basic display driver is added for a generic 32-bpp framebuffer.
Glue logic is added to the x86 arch to request the intitialization
of a linear framebuffer by the Multiboot loader (GRUB) and connect
it to this generic driver.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
When booting using GRUB, some useful information about the environment
is given to us via a boot information structure. We've not made any
use of this information so far, but the x86 framebuffer driver will.
A skeletal definition of the structure is given, and provisions are
made to preserve its contents at boot if the configuration requires it.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Builds with coverage enabled are in a continuous state
of bit-rot as no CI job enables it. Introduce a dedicated
x86 target that builds with coverage enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test is already flaky, but becomes even flakier when
coverage is enabled.
Disable until we put a stake through the QEMU timing issues
being worked on in #14173.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
On some systems the sample was failing validation because
the coverage data would be emitted before the sample had
a chance to print anything else.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We added generation of aliases for "alt-label" (which was the outer
label of a node) for use with shields and connectors. However we've
never used these defines and the generation is a bit inconsistent.
This removes generation of defines like for label 'arduino_spi':
#define ARDUINO_SPI_BASE_ADDRESS ... (already deprecated)
#define DT_ST_STM32_SPI_FIFO_ARDUINO_SPI_BASE_ADDRESS ...
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The test_timer_periodicity waits for first timer expiration
in order to extract timer firing time. The wait is performed
using k_timer_status_sync() API call, which blocks thread
until timer expiration. However if the timer expired before
call the this function, it will return immediately, triggering
test failure.
This commit adds the second call to the k_timer_status_sync()
to ensure that the following part of the test will be executed
as soon as possible after timer expiration.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With pull request #16208 and #16404 hooks for calling user defined
code was implemented. These user extensions are gated by a number of
Kconfigs. The test in this pull request tests that code compiles when
these Kconfigs are enabled.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
When reading attributes from static services their handles will not be
set and must be resolved at runtime.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The file descriptor was not closed after the test which caused
Coverity to complain about resource leak.
Coverity-CID: 198640
Fixes#16493
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Port the fix for the controller implementation to make start
encryption queueable if there is any control procedure in
progress.
Refer to #15335.
Relates to #15335, #15186, #15958 and #14636.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This name collides with one in the bt subsystem, and wasn't named in
proper zephyrese anyway.
Fixes#16604
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fix disconnect command optional argument count to permit the
supply of Bluetooth Address so as to be able to cancel a
pending central initiated connection creation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix gatt indicate when conn is NULL and called with characteristic
declaration as the attribute argument. In this case the handle was not
advanced to the characteristic value. This is inconsistent with the rest
of the notify and indicate API
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Mesh Profile 1.0 Section 6.6:
"The timeout for the SAR transfer is 20 seconds. When the timeout
expires, the Proxy Server shall disconnect."
This will let qualification test case MESH/SR/PROX/BV-05-C pass
without requiring an explicit disconnect.
Fixes#16600
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This moves the processing packets of upper layers from RX thread to the
system workqueue so they have the same priority as the TX callbacks
which has the added benefit of making any protocol on top of L2CAP to
be executed using system wq stack.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
These options are mutually exclusive, or more specifically,
CONFIG_POSIX_API has wider scope and supersedes
CONFIG_NET_SOCKETS_POSIX_NAMES. Implementation-wise, the two
options should not be defined at the same time, as that may
lead to declaration conflicts.
Fixes: #16141
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The struct json_obj_descr definition allocates only 2 bits for type
alignment. Instead of using them literally minus 1 to encode 1, 2, or 4,
let's store the alignment's shift value instead so that 1, 2, 4 or 8 can
be encoded with the same 2 bits to accommodate 64-bit builds.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Not all serial drivers support ASYNC operation and if they do,
they might not support it on every SoC.
Add the SERIAL_SUPPORT_ASYNC option to indicate ASYNC operation
is availiable.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
It does make sense to initialize USB console after USB Device stack.
Note that the value is selected only if we specify USB_UART_CONSOLE
in prj.conf, not in menuconfig afterwards.
Fixes#16518
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Newer versions of GCC (e.g. gcc 9.1.1) fail to compile the version of
Grub that is used by the Zephyr build_grub.sh script. This patch updates
the version of Grub to the latest (as of June 4 2019) which includes a
number of fixes that solve the problem.
Fixes: #16624
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This extends the UpdateHub library code to allow the
use of IPV6 for communication.
Signed-off-by: Christian Tavares <christian.tavares@ossystems.com.br>
This extends the UpdateHub library code to allow the
use of CoAPS/DTLS for communication.
Refs: #13039.
Signed-off-by: Christian Tavares <christian.tavares@ossystems.com.br>
UpdateHub is an enterprise-grade solution which makes simple to
remotely update all your embedded devices in the field. It
handles all aspects related to sending Firmware Over-the-Air(FOTA)
updates with maximum security and efficiency, while you focus in
adding value to your product.
Signed-off-by: Christian Tavares <christian.tavares@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Basically, all driver file names should start with the driver type as
prefix: wdt_ in case of watchdogs here, and not something custom like
wdog_.
For clarity, wdog_ prefix could be changed to wdt_ in the source code
also but that's a detail and will not be addressed here.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Basically, all driver file names should start with the driver type as
prefix: wdt_ in case of watchdogs here.
Maybe 'iwdg' keyword could be removed entirely, and also in function
names. However that is not the scope of this patch.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We had both kernel and os as domains covering low level layers, just use
one and fix the issue of the os domain not being registered.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add board support (and documentation) for the Intel Gordon Peak
Module Reference Board, a dev board based on the Apollo Lake SoC.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Add a version check to allow building with older GCC versions that did
not support this option.
Fixes#16607
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The _k_mutex linker section is used to gather instances of
struct k_mutex into a list so that init_mutex_module() could iterate
that list to perform runtime initialization tasks. In this case, we're
not defining a struct k_mutex but rather a struct pthread_mutex which is
a completely different structure. Not only those struct pthread_mutex
would be corrupted with unexpected data, but since they're not the
same size as struct k_mutex, the actual struct k_mutex instances that
follow in the list would be misaligned and get corrupted too.
There is nothing that requires runtime initialization in the static
definition of a struct pthread_mutex so let's remove the section
attribute.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit fixes the zassert_mem_equal macro to properly print
the formatting string is given as a parameter by the user.
There is an error that is an effect of directly copying the
previous implementation that was using the inline function.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
The compiler and linker was generating errors after
disabling `CONFIG_EXTI_STM32` due to inconsistency
in `interrupt_controller/CMakeLists.txt`
and not considering this option in gpio implementation.
Signed-off-by: Maciej Zagrabski <maciej.zagrabski@grinn-global.com>
These events aren't errors at all, but rather part of normal operation.
They shouldn't trigger error messages, especially given that the console
gets absolutely flooded with them if power management is activated.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
When mcumgr smp data was received over shell uart transport
it was not waking up shell thread and thus request was not
processed. Shell thread must be waken up on any incoming
data, even data which is only dedicated for mcumgr smp.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Charles E. Youse