Incorrectly placed preprocessor conditions caused exit_dpd
when there has been no instance of a device with
dpd_wakeup_sequence parameter.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Signed-off-by: Jan Tore Guggedal <jantore.guggedal@nordicsemi.no>
With power managment is enabled, depending on the SoC power state
used when idle, the MMU may lose context and may need to be re-initialized.
When re-initializing the MMU, we must not re-create the page table
because it may overwrite changes done during the execution, but we still
need to set the asid and page table for the current context.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add release notes for the deprecation of a number of POSIX
Kconfig options. These have been deprecated so that we can
use more normative Kconfig variable identifiers, based on
the Options and Option Groups of IEEE 1003.1-2017.
To simplify migration, use
python $ZEPHYR_BASE/scripts/utils/migrate_posix_kconfigs.py \
-r root_path
Additionally, document the removal of PTHREAD_BARRIER_DEFINE(),
EFD_IN_USE, EFD_FLAGS_SET, which were previously deprecated
>= 2 release cycles before.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Until recently, the posix api was purely a consumer of the
network subsystem. However, a dependency cycle was added as
a stop-gap solution for challenges with the native platform.
Specifically,
1. eventfd symbols conflict with those of the host
2. eventfd was excluded from native libc builds via cmake
If any part of the posix were then to select the network
subsystem (which is a legitimate use case, given that networking
is a part of the posix api), we would get a build error due to
the Kconfig dependency cycle.
As usual, with dependency cycles, the cycle can be broken
via a third, mutual dependency.
What is the third mutual dependency? Naturally, it is ZVFS
which was planned some time ago. ZVFS will be where we
collect file-descriptor and FILE-pointer APIs so that we can
ensure consistency for Zephyr users.
This change deprecates EVENTFD_MAX in favour of
ZVFS_EVENTFD_MAX.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Remove the EFD_IN_USE and EFD_FLAGS_SET macros as they were not
part of the public API.
Rename the internal versions, accordingly.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add a link to the Kconfig option CONFIG_POSIX_NETWORKING in
the documentation.
Additionally, add Kconfig options for other Network
dependencies in an effort to make POSIX Kconfig options
consistent with the specification.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add links to POSIX-related Kconfig options that are related to
POSIX Options and Option Groups.
These include limits that might not have an associated standard
name and related Kconfig variables in other subsystems.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Create a Kconfig option for POSIX_MULTI_PROCESS Option Group
and mark it as experimental.
Currently, Zephyr has two functions that belong to this
Option Group:
- sleep()
- getpid()
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The asynchronous I/O and (process) scheduling options needed
minor rewording.
Additionally, add the experimental flag to each of them since
they are not yet supported.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This change deprecates CONFIG_POSIX_SIGNAL in favour of
the plural CONFIG_POSIX_SIGNALS, which maps directly to the
name of the standard POSIX Option Group POSIX_SIGNALS.
Additionally, mark signals as experimental.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
While event file descriptors (eventfd) are extremely useful, the
API has still not been formalized as part of the POSIX
specification.
Therefore, move this to a separate Kconfig menu for "compat"
(compatibility) features.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Zephyr's POSIX API is moving toward using the standard
nomenclature from IEEE 1003.1-2017 for as much as possible. In
particular, we want to have consistent naming between Zephyr's
POSIX API Kconfig options and the naming for POSIX Options and
Option Groups.
The Kconfig option CONFIG_PTHREAD_IPC has been (ab)used for a
very long time for a variety of different purposes. However,
the standard Option / feature test macro for POSIX Threads is,
intuitively _POSIX_THREADS. There is a corresponding sysconf()
key named _SC_POSIX_THREADS.
Annoyingly, the POSIX Option Group that corresponds to the
Option is POSIX_THREADS_BASE, which is a minor inconsistency
in the standard.
The _POSIX_THREADS Option already includes mutexes, condition
variables, and thread-specific storage (keys). So with this
change, we also deprecate the redundant Kconfig variables that
do not have a corresponding match in the standard.
- CONFIG_PTHREAD_IPC
- CONFIG_PTHREAD
- CONFIG_PTHREAD_COND
- CONFIG_PTHREAD_MUTEX
- CONFIG_PTHREAD_KEY
Additionally, create Kconfig variables for those configurables
which we are lacking:
- CONFIG_POSIX_THREADS_EXT
- CONFIG_POSIX_THREAD_ATTR_STACKSIZE
- CONFIG_POSIX_THREAD_ATTR_STACKADDR
- CONFIG_POSIX_THREAD_PRIORITY_SCHEDULING
- CONFIG_POSIX_THREAD_PRIO_INHERIT
- CONFIG_POSIX_THREAD_PRIO_PROTECT
- CONFIG_POSIX_THREAD_SAFE_FUNCTIONS
Some Kconfig variables were renamed to more properly match the spec:
- CONFIG_MAX_PTHREAD_COUNT -> CONFIG_POSIX_THREAD_THREADS_MAX
- CONFIG_MAX_PTHREAD_KEY_COUNT -> CONFIG_POSIX_THREAD_KEYS_MAX
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This change deprecates CONFIG_POSIX_PUTMSG and introduces a new
Kconfig option CONFIG_XOPEN_STREAMS which maps directly to the
standard POSIX Option, _XOPEN_STREAMS.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This change deprecates the CONFIG_POSIX_SYSLOG Kconfig
variable for CONFIG_XSI_SYSTEM_LOGGING, which has a
direct mapping to the POSIX Option Group XSI_SYSTEM_LOGGING.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Update documentation so that there is a link to
CONFIG_POSIX_ASYNCHRONOUS_IO as it was previously missing.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This change deprecates CONFIG_SEM_VALUE_MAX in favour of
CONFIG_POSIX_SEM_VALUE_MAX which maps directly to
_POSIX_SEM_VALUE_MAX.
Additionally, we add the Kconfig option
CONFIG_POSIX_SEMAPHORES which maps directly to the
POSIX Option _POSIX_SEMAPHORES.
For consistence, deprecate CONFIG_SEM_NAMELEN_MAX
in favour of CONFIG_POSIX_SEM_NAMELEN_MAX.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This change deprecates CONFIG_POSIX_FS in favour of
CONFIG_POSIX_FILE_SYSTEM, which maps directly to the name of the
standard POSIX Option Group.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The functions fnmatch(), getopt(), getentropy()
and others are grouped into the standard Option Group
POSIX_C_LIB_EXT.
The getentropy() function is currently in-draft for
Issue 8 as of 2021.
https://www.opengroup.org/austin/docs/austin_1110.pdf
Not surprisingly, the POSIX_C_LIB_EXT Option Group
also includes the highly debated strnlen() function.
Moving that function will be deferred until later.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This change deprecates CONFIG_PTHREAD_RWLOCK in favour of
CONFIG_POSIX_READER_WRITER_LOCKS, which maps directly to the
name of the standard POSIX Option.
Annoyingly, the POSIX_RW_LOCKS Option Group is inconsistently
named. However, it is more convenient for us to use the Option
name since it is also the format used by the sysconf() variable
(_SC_READER_WRITER_LOCKS).
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This change deprecates CONFIG_POSIX_MQUEUE in favour of
CONFIG_POSIX_MESSAGE_PASSING, which maps directly to the name of the
standard POSIX Option.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This change deprecates CONFIG_PTHREAD_SPINLOCK in favour of
CONFIG_POSIX_SPIN_LOCKS, which maps directly to the name of the
standard POSIX Option Group.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This change deprecates the following Kconfig options
* CONFIG_POSIX_ENV
* CONFIG_POSIX_CONFSTR
* CONFIG_POSIX_SYSCONF
* CONFIG_POSIX_UNAME
and instead groups them into a single Kconfig option that maps
directly to the standard. Namely, CONFIG_POSIX_SINGLE_PROCESS.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The standard specifies _POSIX_BARRIERS as an Option so let's
use CONFIG_POSIX_BARRIERS for consistence.
This change deprecates CONFIG_PTHREAD_BARRIER. Users should
instead choose CONFIG_POSIX_BARRIERS.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The POSIX_MAX_FDS option does not correspond to any standard
POSIX option. It was used to define the size of the file
descriptor table, which is by no means exclusively used by
POSIX (also net, fs, ...).
POSIX_MAX_FDS is being deprecated in order to ensure that
Zephyr's POSIX Kconfig variables correspond to those defined in
the specification, as of IEEE 1003.1-2017. Namely,
POSIX_OPEN_MAX. CONFIG_POSIX_MAX_OPEN_FILES is being deprecated
for the same reason.
To mitigate any possible layering violations, that option is
not user selectable. It tracks the newly added
CONFIG_ZVFS_OPEN_MAX option, which is native to Zephyr.
With this deprecation, we introduce the following Kconfig
options that map directly to standard POSIX Option Groups by
simply removing "CONFIG_":
* CONFIG_POSIX_DEVICE_IO
Similarly, with this deprecation, we introduce the following
Kconfig options that map directly to standard POSIX Options by
simply removing "CONFIG":
* CONFIG_POSIX_OPEN_MAX
In order to maintain parity with the current feature set, we
introduce the following Kconfig options.
* CONFIG_POSIX_DEVICE_IO_ALIAS_CLOSE
* CONFIG_POSIX_DEVICE_IO_ALIAS_OPEN
* CONFIG_POSIX_DEVICE_IO_ALIAS_READ
* CONFIG_POSIX_DEVICE_IO_ALIAS_WRITE
Gate open(), close(), read(), and write() via the
CONFIG_POSIX_DEVICE_IO Kconfig option and move
implementations into device_io.c, to be conformant with the
spec.
Lastly, stage function names for upcoming ZVFS work, to be
completed as part of the LTSv3 Roadmap (e.g. zvfs_open(), ..).
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
With this change, we collect implementations of functions that are
part of the POSIX_FD_MGMT Option Group into one compilation unit
(fd_mgmt.c) and provide a matching Kconfig symbol that is
reflective of the standard.
Additionally, provide Kconfig options for aliases of those functions
since Newlib-based toolchains internally use an underscore-prefixed
alias for many POSIX functions (in this case _lseek).
Prefix Zephyr-native implementations with zvfs_ to prepare for the
up-coming changes in that area.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The POSIX_CLOCK option does not correspond to any standard
option. It was used to active features of several distinct
POSIX Options and Option Groups, which complicated API and
application configuration as a result.
POSIX_CLOCK is being deprecated in order to ensure that Zephyr's
POSIX Kconfig variables correspond to those defined in the
specification, as of IEEE 1003.1-2017.
Additionally, CONFIG_TIMER is being deprecated because it does
not match the corresponding POSIX Option (_POSIX_TIMERS).
With this deprecation, we introduce the following Kconfig
options that map directly to standard POSIX Option Groups by
simply removing "CONFIG_":
* CONFIG_POSIX_TIMERS
Similarly, we introduce the following Kconfig options that
map directly to standard POSIX Options by simply removing
"CONFIG":
* CONFIG_POSIX_CLOCK_SELECTION
* CONFIG_POSIX_CPUTIME
* CONFIG_POSIX_DELAYTIMER_MAX
* CONFIG_POSIX_MONOTONIC_CLOCK
* CONFIG_POSIX_TIMEOUTS
* CONFIG_POSIX_TIMER_MAX
In order to maintain parity with the current feature set, we
introduce the following Kconfig options that map directly to
standard POSIX Option Groups by simply removing "CONFIG_":
* CONFIG_POSIX_MULTI_PROCESS - sleep()
Similarly, in order to maintain parity with the current feature
set, we introduce the following additional Kconfig options that
map directly to standard POSIX Options by simply removing
"CONFIG":
* CONFIG_XSI_SINGLE_PROCESS - gettimeofday()
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
There were two Kconfig constants defined for (effectively) the
same thing in Zephyr. Namely, RTSIG_MAX - the highest valued
real-time signal.
Deprecate CONFIG_POSIX_LIMITS_RTSIG_MAX in favour of
CONFIG_POSIX_RTSIG_MAX since the latter more closely matches
convention.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
There will be some POSIX Kconfig symbols that will be deprecated
in favour of Kconfig symbols that are exact matches for those in
the POSIX specification (1003.1-2017).
Create the empty Kconfig file now, and then incrementally add to
it as non-standard POSIX Kconfig options are replaced with
standard-like POSIX Kconfig options.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
It's sort of more conventient to do the opposite of what was
done with the __z_sysconf_ macros, and use them for both the
full implementation and the macro implementation.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Rather than forcing the macro to -1, simply leave it undefined
if the particular feature in question is unimplemented. This is
the convention used by external libcs.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
For some reason, even though confstr() is implemented in Zephyr,
the header tests were not checking for the existence of _CS_
constants.
Uncomment the tests so that they can be run regularly.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
For some reason, even though sysconf() has multiple
implementations in Zephyr, the header tests were not checking
for the existence of _SC_ constants.
Uncomment the checks - they should be run on a regular basis.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The standard macro is plural - so _SC_MAPPED_FILES - which
corresponds to _POSIX_MAPPED_FILES.
In Zephyr, we previously had _SC_MAPPED_FILE and
_POSIX_MAPPED_FILE, so it's a simple correction.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Some POSIX header tests assumed that various structures would be
declared even if POSIX_API=n. Actually most meaningful POSIX
structures are guarded by feature test macros defined by
the implementation (i.e. implementation conformance macros).
So only run tests on those structures when CONFIG_POSIX_API=y.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The header tests for the existence of constants like
_POSIX_SPIN_LOCKS are bound to fail in one circumstance or
another because each of those options are (theoretically)
features which can be enabled or disabled.
Moreover, some implementations (e.g. external libc) might
not implement one particular subset or option group.
These tests are poorly conditioned, so remove them.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Set the latest version for nanopb.
This fixes searching for the nanopb_generator.py script in the module
instead of system wide.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add missing call to LV_MEM_CUSTOM_FREE when closing a file to prevent
memory from leaking.
Resolves issue #73148.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Fixes: #73132
Add a subsection on tracking Kconfig symbols whose default values is
obtained from another Kconfig symbol.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Set the radio status as ok as the SOC/CPU DT include
does not do it for us.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
As now we have a sufficient model of the CLOCK peripheral,
let's mention it in the docs, and correct the warning
about not supporting the BLE stack.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Default the clock accuracy for the simulated 54L15 target
just as for the real target.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update the HW models module to:
4447a22aea5e791c9bd18e7d71cc092623ddd2bb
Including the following:
* 4447a22a CLOCK,POWER,RESET: Add stubs for the 54L
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix linker error caused by the smartbond timer driver
being enabled at the same time as the smartbond timer counter
driver. For some reason putting SMARTBOND_TIMER=n in a conf
file does not fix this, this change has to be made to the
Kconfig.defconfig to not add this default y case in order
to fix the error. At least that is all I could figure out,
and not sure why the .conf doesn't override it.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Fix the warning about control reaching end of non void
function by adding a default to the switch statement.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Dominik Ermel