This patch moves pwm driver samples to samples/basic and also convert
documentation of PWM samples to RST.
Jira: ZEP-1536
Change-Id: Ib2b3ff8b1722a26618e9a6fe416e2138d82ca28b
Signed-off-by: Punit Vara <punitvara@gmail.com>
Correct some syntax error and update some comments. There is
no functionality change.
Change-Id: I86c922c8aabcc4464b86f33ad7edf6056b1d765c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The gpio device driver name for the sensor sub-system was
renamed to GPIO_SS_x from GPIO_x recently. Let's use the
new gpio driver name for the sensor sub-system in the app.
Change-Id: Ie06b072d31e23e74c3ac41a4590845b24a020ed1
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Remove two configuration parameters related to gpio used as spi
chip slect from prj config file. since they are already in
arduino 101 board config.
Change-Id: Iebaab605d8a6394e27c70ebbf4bac37a24665522
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This patch adds Beetle to the Watchdog test case.
Jira: ZEP-1300
Change-Id: I371ca2f89aaec8e07f45cfa04fc2618d009cf487
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Exiting from the test case when the i2c device is not found, this
to avoid a null pointer dereference
This issue was reported by Coverity
Coverity-CID: 151982
Change-Id: Ib11224ef2a78170f6e4d20545f645b4f2ea4a181
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Exiting from the test case when the gpio device is not found, this
to avoid a null pointer dereference.
This issue was reported by Coverity
Coverity-CID: 151980
Change-Id: I7aafbc993674c8874a16b5a9213108f5769114ec
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
If an i2c transaction fails the sample will hang the program into
an infinite circle.
This commit will remove the infinite circle and report back the
error code from the i2c transaction.
Change-Id: I38d350a805af6bec43f2fa8d4af6ce4e3cc27662
Coverity-CID: 151991
Coverity-CID: 151992
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
If the gpio or spi devices are not found there is no
need to keep the device busy in a loop for this particular
sample.
Since it is not possible to continue execution it is better
to simply end the application.
Change-Id: Ie25ea970a479db2a2f339ca2b37f88541a45ef97
Coverity-CID: 151973
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Exiting from the test case when the gpio device is not found, this
to avoid a null pointer dereference
This issue was reported by Coverity
Coverity-CID: 151980
Change-Id: I44f13131d44c7c093781e1f11f8481e7ef8175c9
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Exiting from the test case when the gpio device is not found, this
to avoid a null pointer dereference
This issue was reported by Coverity
Coverity-CID: 151982
Change-Id: Ifaed47b2b48359dacfdb3111ca2895d5912779e6
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The data structure member being used is character array,
dereferencig this array gives **char instead of the expected
*char type.
This issue was reported by Coverity
Coverity-CID: 152030
Coverity-CID: 152033
Change-Id: Ied67e4b2d47017e6ad5e40b9b6fca1b496c483ed
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Add a sample app to demonstrate the usage of Fujitsu SPI
FRAM.
It uses SPI 1 on quark spi controller and gpio 20 as CS.
Change-Id: I30c83bdd8312ca0cab7a62e397c0cb4ade0821cb
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove this sample app. The component is no longer on the
board (quark_se_c1000_devboard).
Change-Id: I342616781e6f343cfc66b89cbdf85de5844f6f4a
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Use unified kernel for lcd hd44780 app.
Some delays were rounded up to multiples of millisecond, since
k_sleep only takes multiples of millisecond. Based on the lcd
datasheet, this should not cause any problem.
updated some comments based on what the code is actually doing.
Change-Id: I533c822dbaea0246dcd62a76cc23ce0d8edd4630
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Use unified kernel for the watchdog sample app.
Change-Id: I6b53f066033a451c3aafe7f3a528c7f3461ae305
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Add a new pwm app (rgb led) using the new API.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
To demonstrate the usage of the new PWM APIs, this app
to drive a rgb led is added. It will use the new API
pwm_pin_set_usec().
This app will be located in a new sub directory.
Jira: ZEP-745 ZEP-1029
Origin: Original
Change-Id: If8e5d8ab22dcf8b7cf3665e38949715c61ca9c03
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add a new pwm app (motor control) using the new API.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
To demonstrate the usage of the new PWM APIs, this app
to drive a servo motor is added. It will use the new
API pwm_pin_set_usec().
This app will be located in a new sub directory.
Jira: ZEP-745 ZEP-1029
Origin: Original
Change-Id: I65857848e64d0478c4e12d1317b2089cdd1ecf5c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add a new pwm app (fade led) using the new API.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
To demonstrate the usage of the new PWM APIs, this app
to fade led is added. It will use the new API pwm_pin_
set_usec().
This app will be located in a new sub directory.
Jira: ZEP-745 ZEP-1029
Change-Id: I8d929a21f7de88307c47b52f98f131e00b2fdbe7
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Replace existing APIs which will be deprecated by
the new API in this app and rename the app.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
Since the two existing APIs (pwm_pin_set_period and
pwm_pin_set_values) used by this app will be deprecated,
this change is to replace them with the new API
pwm_pin_set_usec().
To demonstrate the usage of the new PWM APIs, more apps
will be added. All the apps will be located in their own
sub directories. The existing app is actually one to
blink LED. So, it is moved the "blink_led" sub directory.
Jira: ZEP-745 ZEP-1029
Change-Id: Icc3fbf6b6c25db9590c63bc08f40ec62c87c0f16
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This sample justs outputs the SPI FLASH IDs.
I think we should improve this to also output done, otherwise
it looks like its stuck or something.
Change-Id: I18d5919c1e25bb5aaa9ceba53793cc14b15f3c77
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
These platforms don't have the hardware and will always fail.
Change-Id: I637d39f003bd1d507da0b5bb6fa12118040fcd63
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
When the sample fails, it's difficult to identify whether it failed
during the configuration or transfer stage. Provide a little more
information which will allude to the nature of the failure.
Change-Id: I5272ce73f56b0e51c8439d5510e512b616665705
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: I01c825c7eb44d6c321f2ffb88e8899da528921dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Punit Vara