This commit removes the `hifive1` board from the `platform_exclude` list
for the `drivers.gpio.1pin` pin.
The root cause for why this platform was disabled was fixed in the recent
Renode version upgrade in the CI image.
Fixes#69350.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add support for use of FAKE_ENTROPY_NATIVE_POSIX as entropy
driver for the Controller on BOARD_NRF54L15BSIM.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Extend tests with case where extension is copied from RAM buffer
into filesystem and then loaded from filesystem.
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
This patch extends LLEXT shell commands with support for loading
LLEXT from a filesystem. Use of the command requires absolute path
to the llext file.
Example use:
`llext load_llext hello_world /lfs/hello_world.llext`
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
Introducing `llext_prepare()` and `llext_finalize()` APIs
that are invoked and the beginning and the end of the `llext_load()`
function.
The purpose of these functions is to bring possibility of initializing
loader before it is used and uninitialize or clean up when
it is no longer needed. Both functions are optional.
The buffer loader has been aligned to methods introduced in the patch.
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
By default, normal memory is set readable+writable and not executable.
Adjust those permissions according to each region:
LLEXT_MEM_TEXT --> K_MEM_PERM_EXEC
LLEXT_MEM_DATA, LLEXT_MEM_BSS --> K_MEM_PERM_RW
LLEXT_MEM_RODATA --> K_MEM_PERM_RO aka 0
This must be done only at the end of an LLEXT load operation as memory
needs to remain RW for reloc processing, etc.
And while at it, flush/invalidate the cache accordingly.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
It is sometimes necessary to modify/update memory permissions on some
pages, especially with LLEXT where some allocated segments have to be
executable.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
`CLOCK_CONTROL` subsystem being selected directly at family level,
remove it from individual board configurations.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Rather setting the driver default in soc, make it directly at symbol
level rather than soc and clean up redundant `select` occurrences.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
CLOCK_CONTROL subsystem is expected to be enabled systematically on all
STM32 devices.
Make it a series default.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
GT911 driver was reading an additional touch point into the stack
defined touch point array, causing an out-of-bounds write on the stack.
Fix this issue by adjusting the limit on the for loop, and add a note
to the driver as to why we don't need to validate the number of points
reported for future developers
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The default Max A-MPDU length is 8191 shown in the VHT Cap Info from
SAP's beacon/Assoc response, and this length is read from
hapd->iface->conf->vht_capab. It will lead to the AMPDU only contains
5 packets and the throughput is only 60Mbps for 1x1 HE case in 5GHz.
Change the default vht_capab to VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MAX
(1048575), and the throughput can be increased to 83Mbps.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Use the correct define for checking if the DCDC converter shall be
enabled.
This resolves the opposite behavior where boards that enable the DCDC
converter uses the LDO and boards where LDO is used they enable the
DCDC.
Fixes: e189fb0720 ("soc: nordic: nrf52: add support for DT-based
regulators config")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Changed NET_CONFIG_CLOCK_SNTP_INIT depends on to require
POSIX_TIMERS instead of the deprecated POSIX_CLOCK
Signed-off-by: Luca Arato <luca.arato@secomind.com>
A connected state was reported as a disconnected state.
This led to wrong reports of the connected state to all systems
relying on it.
Signed-off-by: Lukas Gehreke <lk.gehreke@gmail.com>
Clarify the HTTP service definition so that the host parameter can
be set as NULL in which case the server will listen all addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Without this it is not possible to serve both IPv6 and IPv4
connections if service host is NULL.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow NULL host parameter when creating HTTP service. This means
that the socket is created without specifying binding address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make lists of code samples more compact (a lot of vertical real estate was
being wasted) and more visually appealing.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The zephyr-app-commands directive can output a helpful hint to the user
when they are trying to build a sample that is in the Zephyr tree,
telling them to ensure they are in the root folder of the Zephyr repo.
Update all doc pages that were using :app: instead of :zephyr-app: so
that the hint is displayed.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to the remaining samples in
`samples/subsys` that didn't use it yet in preparation for upcoming
changes to the Zephyr documentation that will be leveraging the provided
description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This link probably never worked. This commit fixes the relative
URL to properly point to where Doxygen docs live.
Fixes#78016.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Enabled Network shell and Ethernet L2 interface
with XGMAC driver in CLI application
Enabled MDIO shelll with dwcxgmac mdio driver.
Enabled TCP and UDP over IPV4.
Added intel_socfpga socdk support for echo_client and
echo_server sample applications.
Signed-off-by: Santosh Male <santosh.male@intel.com>
Added XGMAC0, XGMAC1, XGMAC2 device nodes in
intel_socfpga_agilex5 dts file with default
parameter values and default device node status
as 'disabled'.
Signed-off-by: Santosh Male <santosh.male@intel.com>
ethernet driver
This driver is capable of supporting basic features
of synposys dwc-xgmac ethernet MAC IP. Basic features
includes,
1. Tx and Rx, multiple Tx and Rx DMA channels, multiple
Tx and Rx queues
2. Check Sum Offloading on Tx and Rx for IPv4, IPv6,
TCP, UDP and ICMP packets
3. 10M/100M/1G speeds, Autonegotiation, Link speed
configuration, Promiscuous mode, Full/Half
duplex configuration
4. Added source files for synopsys dwc xgmac mdio driver.
synopsys dwc xgmac mdio driver fetures includes:
It supports clause 22 of IEEE 802.3 for ethernet PHY devices
management.
5. Extended mdio shell support for dwcxgmac mdio driver.
Signed-off-by: Santosh Male <santosh.male@intel.com>
Use fallbacks in codec cfg functions in the BAP broadcast
babblesim tests to avoid unnecessary noise in the logs of
the tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add to_str functions for context, parental rating, active state,
codec cap freq, codec cap frame duration,
codec cap channel count and location.
The remaining values are just numeric values and does not
need a to_str function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix `k_poll()` loop example by using separate `if` blocks instead of
`if`-`else`-chain to ensure all events are handled, even if multiple are
active at the same time.
Signed-off-by: Cla Mattia Galliard <cla-mattia.galliard@zuehlke.com>
LPUART without modem support is used in some NXP socs. Build error
occurs for such socs because of accessing unavailable register.
Fix it by adding #if directive for checking modem support availability.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Add OSCERCLK, MCGIRCLK, and MCGPCLK clock sources definitions
to the kinetis_sim.h in include dt-bindings.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Devicetree binding for NXP mcxc oscillator is not available.
Add the binding to be able to configure the oscillator in devicetree.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Add configuration settings for the FOPT, FSEC, and flash configuration
offset to the FTFA module binding.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Charging a battery has three phases (compare Figure 8-2 in
https://www.ti.com/lit/ds/symlink/bq25180.pdf)
First is a pre-charge phase, then a constant current, then a constant
voltage phase.
During the pre-charge phase, the battery is only charged with a very low
current, to not damage the cells, because they are below a threshold,
that is considered healthy for the battery and need to be brought back
up to a healthy voltage.
Signed-off-by: Fabian Pflug <fabian.pflug@grandcentrix.net>
The battery charger will stop charging the battery if it believes,
that is is completely charged. If the battery drops below a certain
voltage threshold, then the battery charger starts charging the
battery again.
For the bq25180 the threshold can only be one of either 100mV or
200mV below the VSET voltage.
See table 8-16 Bit 5 in https://www.ti.com/lit/ds/symlink/bq25180.pdf
Signed-off-by: Fabian Pflug <fabian.pflug@grandcentrix.net>
The linear battery charger will charge the connected battery up
to a specific voltage. This is different depending on the chemistry
of the battery. Most LiPo Batteries have a nominal voltage of 4.2V,
which is why the default voltage of the bq25180 is 4.2V.
Signed-off-by: Fabian Pflug <fabian.pflug@grandcentrix.net>
Features enabled by this commit:
* M7 core available with or without the Arduino MCU-based bootloader by
correctly initializing the external clock source.
* All LEDs, relays and the user button are mapped into the device tree
(samples/common/blinky works out of the box).
* USB can be used in ACM mode (samples/subsys/usb/cdc_acm works without
changes). The default Zephyr console is configured to use cdc_acm_uart0
that in turn is assigned to the only USB port available.
Also enable USB stack to make sure that the console is available by default
and twister builds don't fail with missing device and added the default USB
vendor (0x35d1 Finder SpA) and product (0x0164) numbers to match the ones
used in the original product.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
Filip Kokosinski