move to a more cosnistent test naming using test_ to improve reporting
and parsing. Expand string tests and run them as separate ztest tests.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
VL53L0X_PerformSingleRangingMeasurement() returns a signed 8-bit
integer, not an unsigned 8-bit integer, making the "< 0" comparison
worthless.
Coverity-CID: 182593
Coverity-CID: 182597
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Instructions for generating documents locally needed some updates
because of build environment changes and use of newer tool versions.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
When testing whether the CTR mode decrypted the payload properly, a
comparison of `decrypt.out_buf` with the known plain text `plaintext`
is performed, but the buffer comparison that is printed uses
`plaintext` and `encrypt.out_buf` instead.
Coverity-CID: 181847
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This sample downloads a more or less big file (~6MB as preconfigured)
over HTTP and checks its hash for integrity. It also repeat such a
download indefinitely, counting total number of bytes transferred.
This is thus a kind of traffic load testing sample. (Ported to C
from MicroPython original).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The nrf52840 has 2 gpio ports, and 48 GPIO. We need to
adapt the range to allow the gpio on port 1 to be used
by this driver
Signed-off-by: Giuliano Franchetto <giuliano.franchetto@intellinium.com>
The APA102 is a RGB LED with integrated controller. LEDs can be
daisy-chained and use SPI for communication. The SPI port is
configured via Device Tree.
Tested on the Adafruit Trinket M0.
Signed-off-by: Michael Hope <mlhx@google.com>
The interrupt line number is an unsigned integer; it makes no sense to
compare if it is greater than or equal to 0.
Coverity-CID: 182602
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The xtensa headers use this for simplicity when SMP is not enabled.
It should still build on older platforms that don't include the
asm2-style CPU pointer scheme.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Non-asm2 devices without a generated SoC interrupt file will see a
compile failure due to the missing header.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The mbedtls test is hitting a compiler bug where two subtests will
soft fail on qemu_xtensa when assertions are enabled. This is despite
the fact that:
+ The failure is entirely internal to the mbedtls suite.
+ The mbedtls code does not use zephyr asserts
+ The mbedtls code does not call into zephyr code that might assert.
+ The behavior persists even when an irq_lock() is held across the
entire test, ruling out any asserts in interrupt/exception context.
+ And EVEN WHEN the mbedtls library blobs are bytewise identical
between assert and non-assert cases.
The bug seems to be a layout thing where the mbedtls code behavior
differently based on code address and/or link-time optimizations
(xtensa has a few).
Unfortunately sanitycheck enables assertions by setting CFLAGS
directly and not via kconfig, so we can't fix this by turning the
feature off in an app right now. This patch adds a simple "override"
flag that can be set by apps like this that hit bugs.
Again, note that zephyr assertions are not used nor needed by this one
test.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test had to special case ARM, where error handlers are not
NORETURN functions. The xtensa/asm2 layer has the same behavior
(albeit for a different reason). Add it to the list, and clean up the
explanation a bit.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Traditionally k_thread_abort() of the current thread has done a
synchronous _Swap() to the new context. Doing this from an ISR has
never worked portably (some architectures can do it, some can't) for
this reason.
But on Xtensa/asm2, exception handlers now run in interrupt context
and it's a very reasonable requirement for them to abort the excepting
thread.
So simply don't swap, but do the rest of the bookeeping, returning to
the calling context. As a side effect it's now possible to terminate
threads from interrupts, even if they have been interrupted.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
It's not impossible that something we just handled (e.g. a machine
exception) called k_thread_abort() on our current thread. Don't try
to return into it, check the DEAD state.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In asm2, the machine exception handler runs in interrupt context (this
is good: it allows us to defer the test against exception type until
after we have done the stack switch and dispatched any true
interrupts), but that means that the user error handler needs to be
invoked and then return through the interrupt exit code.
So the __attribute__(__noreturn__) that it was being decorated with
was incorrect. And actually fatal, as with gcc xtensa will crash
trying to return from a noreturn call.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Simple SMP test to validate the two threads can be simultaneously
scheduled. Arranges things such that both threads are at different
priorities and never yield the CPU, so on a uniprocessor build they
cannot be fairly scheduled. Checks that both are nonetheless making
progress.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In SMP, the system timer is used for timeslicing on auxiliary CPUs,
but the base system timekeeping via _nano_sys_clock_tick_announce() is
still done on CPU0 only (because the framework isn't prepared for
asynchronous notification yet). Skip processing on CPU1+.
Also, due to a hardware interaction* that is difficult to work around,
timer initialization on the auxiliary CPUs is done at the very end of
the CPU bringup, just before the swap into the scheduler. A
smp_timer_init() API has been added for this purpose.
* On ESP-32, enabling the timer seems to result in a near-synchronous
interrupt being delivered despite my best attempts to keep it
masked, then blowing things up because the CPU record isn't set up
to handle it yet.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Now that all the pieces are in place, enable SMP for real:
Initialize the CPU records, launch the CPUs at the end of kernel
initialization, have them wait for a flag to release them into the
scheduler, then enter into the runnable threads via _Swap().
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
A pure timer-based idle won't work well in SMP. Without an IPI to
wake up idle CPUs out of the scheduler they will sleep far too long
and the main CPU will do all the scheduling of wake-up-and-sleep
processes. Instead just have the auxilary CPUs do a traditional
busy-wait scheduler in their idle loop.
We will need to revisit an architecture that allows both
wait-for-timer-interrupt idle and SMP.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The scheduler needs a few tweaks to work in SMP mode:
1. The "cache" field just doesn't work. With more than one CPU,
caching the highest priority thread isn't useful as you may need N
of them at any given time before another thread is returned to the
scheduler. You could recalculate it at every change, but that
provides no performance benefit. Remove.
2. The "bitmask" designed to prevent the need to individually check
priorities is likewise dropped. This could work, but in fact on
our only current SMP system and with current K_NUM_PRIOPRITIES
values it provides no real benefit.
3. The individual threads now have a "current cpu" and "active" flag
so that the choice of the next thread to run can correctly skip
threads that are active on other CPUs.
The upshot is that a decent amount of code gets #if'd out, and the new
SMP implementations for _get_highest_ready_prio() and
_get_next_ready_thread() are simpler and smaller, at the expense of
having to drop older optimizations.
Note that scheduler synchronization is unchanged: all scheduler APIs
used to require that an irq_lock() be held, which means that they now
require the global spinlock via the same API. This should be a very
early candidate for lock granularity attention!
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In SMP mode, the idea of a single "IRQ lock" goes away. Long term,
all usage needs to migrate to spinlocks (which become simple IRQ locks
in the uniprocessor case). For the near term, we can ease the
migration (at the expense of performance) by providing a compatibility
implementation around a single global lock.
Note that one complication is that the older lock was recursive, while
spinlocks will deadlock if you try to lock them twice. So we
implement a simple "count" semantic to handle multiple locks.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Simple implementation that caps at 4 CPUs. Long term we should use
some linker magic to define as many as needed and loop over them
without needlessly increasing data or code size for the tracking.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When in SMP mode, the nested/irq_stack/current fields are specific to
the current CPU and not to the kernel as a whole, so we need an array
of these. Place them in a _cpu_t struct and implement a
_arch_curr_cpu() function to retrieve the pointer.
When not in SMP mode, the first CPU's fields are defined as a unioned
with the first _cpu_t record. This permits compatibility with legacy
assembly on other platforms. Long term, all users, including
uniprocessor architectures, should be updated to use the new scheme.
Fundamentally this is just renaming: the structure layout and runtime
code do not change on any existing platforms and won't until someone
defines a second CPU.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The xtensa-asm2 work included a patch that added nano_internal.h
includes in lots of places that needed to have _Swap defined, because
it had to break a cycle and this no longer got pulled in from the arch
headers.
Unfortunately those new includes created new and more amusing cycles
elsewhere which led to breakage on other platforms.
Break out the _Swap definition (only) into a separate header and use
that instead. Cleaner. Seems not to have any more hidden gotchas.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Simple test of spinlock semantics. Bounce between two CPUs locking
and releasing, validating that nothing changes at unexpected times.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Minimal spinlock API based on the existing atomic.h layer. Usage
works just like irq_lock(), but takes an argument to a specific struct
k_spinlock_t to un/lock. No attempt at implementing fairness or
backoff semantics. No attempt made at architecture-specific assembly.
When CONFIG_SMP is not enabled, this code falls back to a zero-size
struct and becomes functionally identical to irq_lock/unlock().
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Simply define the Kconfig variables in this patch so they can be used
in later patches. Define MP_NUM_CPUS correctly on esp32. No code
changes.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This is a mostly-internal API to start a secondary system CPU, with an
implementation for the ESP-32 "APP" cpu. Exposed in kernel.h because
it's plausibly useful for asymmetric MP code managed by an app.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Anas Nashif