The uart node in the native_posix dts has a reg property, but there are
no registers associated with the uart. So remove the property and
remove the unit address associated with the reg (now that its removed).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch reorders designated initializers to satisfy C++ requiring
that designated initializers appear in the same order as the members
they initialize.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
This patch adds `extern "C"` linkage directives so the header files can
be included by C++ source files.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Clarify a little bit how to fetch and compile Babblesim.
So users will not need to have repo installed,
and to guide them to add the variables to their shell init
script
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This patch introduces a dedicated work queue for handling the events
from ISR (i.e. for notifying the USB device stack, for executing the
enpoints callbacks, etc.). The system work queue cannot be used for
this purpose as it might be used in applications for scheduling USB
transfers and this could lead to a deadlock when the USB device stack
would not be notified about certain event because of a system work
queue item waiting for a USB transfer to be finished.
The FIFO named so far `work_queue` is renamed to `usbd_evt_fifo`
to better indicate its purpose and to avoid confusion.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
After the removal of the virtualcom DT node in 5071eee, using the chosen
node is no longer functional. Instead the Kconfig
CONFIG_UART_CONSOLE_ON_DEV_NAME is used to locate the correct UART.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
No binding has anything but 'version: 0.1', and the code in scripts/dts/
never does anything with it except print a warning if it isn't there.
It's undocumented what it means.
I suspect it's overkill if it's meant to be the binding format version.
If we'd need to tell different versions from each other, we could change
some other minor thing in the format, and it probably won't be needed.
Remove the 'version' fields from the bindings and the warning from the
scripts/dts/ scripts.
The new device tree script will give an error when unknown fields appear
in bindings.
The deletion was done with
git ls-files 'dts/bindings/*.yaml' | xargs sed -i '/^\s*version: /d'
Some blank lines at the beginning of bindings were removed as well.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Updated fs shell sample readme to state the requirement of a 32-bit
version of libfuse while building for native_posix board
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Make the Upper and Lower Link Layer split architecture
implementation of the controller as the default when
building Zephyr Bluetooth Low Energy controller support
in applications.
Noticeable missing feature (porting) in comparison to old
architecture implementation is, Advanced scheduling of
connection events.
The missing features will subsequently be submitted
upstream.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename the controller Kconfig option BT_LL_SW to
BT_LL_SW_LEGACY in preparation towards switch to new Link
Layer implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
File system API functions that operate on paths are passed both the
absolute path including the mount point prefix, and the mount point
within which the path lies.
Unfortunately it's not entirely trivial to convert an arbitrary path
within the file system space to an absolute path within its mount point,
because the path may be to the mount point itself and not end with a
directory separator. The effect is that a file system implementation
like nffs may be given an empty path when "/" is required.
Add an implementation module that does this transformation and use it to
transform paths within each filesystem wrapper.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Conditional compile the use of Rx Pool used to dispatch ULL
context generated messages towards LL thread context, which
is presently only used in connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Certain Thread implementations (notably ARMs) require a DHCPv6
implementation.
Allow the usage of the relevant OpenThread configuration parameters in
Zephyr.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Commit 948ef47cf4 ("dts: riscv32: Add rv32m1 zero-riscy core") put
common ri5cy and zero_riscy DT parts in rv32m1.dtsi, with two separate
rv32m1_ri5cy.dtsi rv32m1_zero_riscy.dtsi files that #include it.
The two interrupt multiplexers are defined in the common rv32m1.dtsi
file, but rv32m1_ri5cy.dtsi rv32m1_zero_riscy.dtsi each only specify
'interrupts' for one of them. Since 'interrupts' is 'category: required'
in openisa,rv32m1-intmux.yaml, this leads to warnings (or errors with
the new DT parser).
Disable (status = "disabled") the two interrupt multiplexers in the
common rv32m1.dtsi file and enable them in the board-specific files to
fix it. Required props. are only checked for enabled nodes.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The property is required on all SPI clients, but was missing from
several devicetree nodes. Set it, using the capitalized version of the
node alias when present, with "jedec,spi-nor#0" as the fallback.
Closes#17662
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
In most of the cases the fixed-clock node is not referenced by the
Zephyr code, making the label property just a burden.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Have the SoC dtsi files for microchip mark the devices (uart & i2c) as
disabled by default and let the board dts files enable which one's they
need/use (which is what's happening already).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
User mode isn't allowed to generate a panic and this would
lead to a confusing privilege violation exception.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The binding for arm,cmsdk-timer requires a label so add it into the dts
since its missing on v2m_musca_b1.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The bindings for arm,cmsdk-{d}timer requires a label so add it into the
dts since its missing on mps2_an521.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Updated the documentation of display_blanking_on and
display_blanking_off to clarify its usage.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
I'm guessing STM32 GPIO nodes don't generate interrupts, because I can't
find any device tree nodes with 'compatible = "st,stm32-gpio"' and an
'interrupts' property.
Remove the required 'interrupts' property from the binding. This fixes a
bunch of errors in
https://github.com/zephyrproject-rtos/zephyr/issues/17532.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
spi-max-frequency is marked as required in
dts/bindings/mtd/jedec,spi-nor.yaml.
I took the value from the datasheets (133 MHz for all), and guessed that
a dummy entry is fine for QEMU.
Fixes some errors in
https://github.com/zephyrproject-rtos/zephyr/issues/17532.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The port_sel property had the category set to 'define' which isn't a
valid option. Change it to be 'required'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit makes the clock property optional (through base.yaml),
as clock reference is not used in the code.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This changes RPA timeout so that the address is changed every 60
seconds. This change is needed to speed up privacy related test cases.
Currently, the new RPA was initiated on request that was a bit hackish
and could be done via BT_RPA_TIMEOUT Kconfig option.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This commit make the float_disable test suite more robust
for fast CPUs, by replacing k_sleep(1) with k_yield(), as
the mechanism to trigger thread swap-out during the test
execution. In the wake of using k_yield(), the test, now,
fixes the priorities of all testing threads to 0, making
the test behavior more deterministic with respect to
thread scheduling. The patch doesn't change the functional
behavior of the test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix a race which seems to have been presenting itself
very sporadically on loaded systems.
The race seems to have caused tests/kernel/sched/schedule_api
to fail at random on native_posix.
The case is a bit convoluted:
When the kernel calls z_new_thread(), the POSIX arch saves
the new thread entry call in that new Zephyr thread stack
together with a bit of extra info for the POSIX arch.
And spawns a new pthread (posix_thread_starter()) which
will eventually (after the Zephyr kernel swapped to it),
call that entry function.
(Note that in principle a thread spawned by pthreads may
be arbitrarily delayed)
The POSIX arch does not try to synchronize to that new
pthread (because why should it) until the first time the
Zephyr kernel tries to swap to that thread.
But, the kernel may never try to swap to it.
And therefore that thread's posix_thread_starter() may never
have got to run before the thread was aborted, and its
Zephyr stack reused for something else by the Zephyr app.
As posix_thread_starter() was relaying on looking into that
thread stack, it may now be looking into another thread stack
or anything else.
So, this commit fixes it by having posix_thread_starter()
get the input it always needs not from the Zephyr stack,
but from its own pthread_create() parameter pointing to a
structure kept by the POSIX arch.
Note that if the thread was aborted before reaching that point
posix_thread_starter() will NOT call the Zephyr thread entry
function, but just cleanup.
With this change all "asynchronous" parts of the POSIX arch
should relay only on the POSIX arch own structures.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This updates tester application to recent changes in BTP related
to Connection Parameters Update.
Connected event has been extended with connection parameters.
Connection Parameters Update command and event have beend added to
initiate and track current connection parameters.
Needed to automate qualification test GAP/CONN/CPUP/BV-06-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Activate the DTCM for STM32F7 board that have Ethernet.
This is needed because the Ethernet driver puts the DMA buffer
to this section.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
For STM32F7 MCU the actual implementation doesn't work when the
DMA buffers are placed in the SRAM.
This might be a problem with caches.
To overcome this problem, the buffer is moved to the DTCM.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit adds a DTCM (Device Tightly Coupled Memory) section for
Cortex F7 MCUs. The Address and length is defined in the corresponding
device tree file.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Simple backends, like UART or RTT, implementation is very similar.
Header has functions which can be reused by simple backends and
remove redundant code.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add some diagrams showing the different scheduling algorithms we
support.
The diagrams were made using draw.io and can be edit using draw.io.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Kumar Gala