Currently the packet is dropped if some other packet needs to
be sent instead. This does not make much sense in Zephyr so
activate packet queueing where the saved packet is sent later.
The queueing can happen e.g., with neighbor discovery where
the packet to be sent requires ND to be done before the actual
application packet is being sent.
Change-Id: Ia321d641eec5acfbc9f8f581de712801a483e32d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If neighbor discovery is in use, then we do not need to do
various route etc setup. Normally ND needs to be active
but in some specific scenarios it can be turned off. One
such scenario is if an application is run inside qemu
which uses slip and host tun0 interface for communication,
in this case host typically do not activate ND for tun0
so we need to disable it also in zephyr side.
Change-Id: I8ac59990c5bbcdb06cca98bde7be3a0ad6e807a8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Rename application init function to init_app() so that it is more
descriptive.
Change-Id: Id470756345c0bd10b103270115b26f3e8a281d17
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use link local addresses instead of public IPv6 addresses
in the demo applications. This way the application do not
need to do any special setup.
Change-Id: I9aa817c388e3f673a6597801813dd1d0a8feb6b5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the user unsets CONFIG_NETWORKING_WITH_LOGGING, it will mean he
really doesn't want to get any network stack logging output.
Change-Id: I0629a045adbf8916327a8a9ba69b6e6e9ee2e7d9
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fixing this issue:
net/ip/l2_buf.c:81:31: note: in expansion of macro 'NULL'
#define inc_free_l2_bufs_func NULL
^
net/ip/l2_buf.c:88:2:
note: in expansion of macro
'inc_free_l2_bufs_func'
inc_free_l2_bufs_func(buf);
^
Change-Id: Ie58f23af479ec4f2dd625b1f0f36720bbe54f928
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of manually creating bit shifts for individual bits use the
BIT() macro that exists for this purpose.
Change-Id: I599ecc16b3a2cffe8a355e19816c405e51937e91
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Including zephyr.h instead of microkernel.h will also bring in
sysgen.h, which may not be available at the time these files are used
during the build.
Change-Id: I5e9e33a06a5877c6077bceebbab1bee6479fddc0
Signed-off-by: Iván Briano <ivan.briano@intel.com>
() Add brief descriptions for #defines.
() Hides internal only API typedefs and struct.
Change-Id: I452c5d7fe56d57ba05338639986e2fff44a89244
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Add brief descriptions for #defines.
() Remove the callback enums as they are not being used.
() Hides internal only API typedefs and struct.
Change-Id: I62bc38890a7b49b3ec613064f7574e2f5b75b70c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Now that we've gone open source, there no longer needs to be a user id.
Change-Id: Ib3bc8ca1591d23e89a7d9d33946d56438c4f9846
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Keys storage is present also for non bonded devices. Add helper
that checks for actual keys being present in storage that may be
used inline.
Change-Id: Icfc758e3ac89e88ca48948e5193878cf5689611a
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If remote device indicates no bond pairing there is no point in
storing any keys. If no keys are stored key storage is freed on
disconnection. Keeping key storage around while device is connected
is important for GATT being able to check encryption key size also
for paired but not bonded devices.
Change-Id: If80e9d4c6da02e73c8730972a7a388b0b7d14ba6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Document callbacks included in structs since they are also public API.
Change-Id: I8eda02b12172c54e8076208d8ea5ae246c650a3c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add spaces after a list of values as required by checkpatch script.
Change-Id: I04bd8af8195e3966fd2b9c36ead49483030eae18
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There is no point having separate handlers for signed writes and
write without response commands because both call the same,
bt_gatt_write_without_response function.
Change-Id: Ib033ffb77e2123dd565e8f1119ef668253f810f9
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This enables using echo_server with Bluetooth by passing
CONF_FILE=prj_bt.conf, it is also enabled for testing so changes to
echo_server are actually tested with NETWORKING_WITH_BT.
Change-Id: I1d949798c7a9689ebc2d342ae7342dce32f319e5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is prefered to use #if (!)defined form for checking defines since it
can actually check more complex conditions.
Change-Id: I59c6fff1f2d4e950f9ae64adb9f8833ef0fea4d0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This add an error to the output which helps detects failures in case
debug is not enabled.
Change-Id: I2f4ed357ccf288c15b231d637bf1986af9ecbf37
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Document the parameters and expected return values of the read, write
and flush attribute callbacks.
Change-Id: I600da2ed64944986395520d7fae77fcb05b58e86
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It was hard to see where the condition ended and the code block started.
Change-Id: If966b0a404beb1c783a1c8dd89e6049a6600cadf
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Always use braces, even on one-line code blocks.
Change-Id: Ic9e60db7f851d2fbee5bfd79cd810df23c0c5db0
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The current documentation seems to gloss over the fact that powering on
the device before any JTAG operation is necessary.
Change-Id: Id7a46b611ddba97fa72e0a3a33ddc189b1e4a7c4
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Pins start at 1, not 0. Including JTAG pins.
Change-Id: I2e058c114bd1a4da25d4964e418a942d3c41b08c
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The wget command is broken in the documentation. By using a \
to continue the command on another line, unfortunately line does not
render a newline character after it. As such, a copy and paste
fails miserably. Removing the \ allows a copy and paste operation.
Change-Id: I95c09dbe2dbcd51dedefcedc285e6ed38419960f
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This board is not supported and not available for general public.
Use the Quark SE CRB/Devboard instead.
Change-Id: Id0f8c08bbacb812ef00fe9502b4acecf4f31ffd7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix incorrect path for ssh key. It is .ssh, not .id.
Change-Id: I84f054f9ba880e31fcc89cf10da0fb8522dfbae0
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Cancel ongoing connect request when we receive disconnect command.
Change-Id: I12f1c1326c4b13672879b8f2dbe457cae395b486
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implement bt_conn_disconnect() API function.
Change-Id: I08979d35400cf947d7ec646bad72f625141f95e0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Introduce BT_GATT_ERR macro to make it possible for application
callbacks to return exact ATT error codes.
Change-Id: I971536508e75036fbddc40b3f33e5201e11940bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These are specified in the Core Specification Supplement.
Change-Id: Ieaa9f061666119bb430d77b0fd40b4891e515b81
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For now this only exposes the various ATT error codes.
Change-Id: If568782e90dca22871681d2d3b2d81ae4cb8e5e4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Connection state helps to keep make right choice when connecting /
disconnecting.
Change-Id: Ifea620c05f869a633f578bf5d5c8ba603a58a46a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In preparation of creating a public att.h rename the existing internal
header appropriately.
Change-Id: I8588712bc5aa57d391c5ce0886c99692e5a2823e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This splits Authorization permission to Read with Authorization
and Write with Authorization.
Some attribites may be readable with no authorizarion, but writable
with authorization defined by a higher layer specification or be
implementation specific (eg. Server Characteristic Configuration
Descriptor).
Change-Id: I341a7095c1e8db1dea92cdeebf76c5a2307a49a1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The file can be used to define variables used by the SDK to avoid
having to define them everytime a session is started.
The old file names ~/zephyr-env_install.bash will still work but
it will warn about the file being renamed. We do not want to break
users who have ~/zephyr-env_install.bash in their home and depend on
it.
Change-Id: I04fcaa76854bda3dcfc1cabe75e00e95c511b10d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Put kconfig targets in a new target 'kconfig-help' instead of showing
it by default.
- Show how the the different boards can be used with make BOARD=<board>
Change-Id: I481d4acaf72b1f05925c6f56e510329681da8e11
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This fix not being able to stop advertising while connected due to
invalid use of BT_DEV_ADVERTISING flag.
Change-Id: If5578fa2c69dd18d6623d05ae44d4710cce9a9e5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The 100ms wait was too short. After some debugging, the
packets were successfully sent after 250ms wait.
Change-Id: Ib367f8df81ed3039b041f1e7b46d8f562a0adcac
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the reply for a sent message is not received, then try
to send it once again. If the second resend fails, then mark
the packet as failed.
Change-Id: Ibe9b9384e2e84f055c6486a5bd4d7293675e5d42
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Jukka Rissanen