Split ARM and ARM64 architectures.
Details:
- CONFIG_ARM64 is decoupled from CONFIG_ARM (not a subset anymore)
- Arch and include AArch64 files are in a dedicated directory
(arch/arm64 and include/arch/arm64)
- AArch64 boards and SoC are moved to soc/arm64 and boards/arm64
- AArch64-specific DTS files are moved to dts/arm64
- The A72 support for the bcm_vk/viper board is moved in the
boards/bcm_vk/viper directory
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Several platforms don't have flash drivers and these platforms the DFU
sample will not build or even pass Kconfig on. Exclude them until they
have flash driver support.
Fixes#33422
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Support single mode operation by enabling it and
making the driver to use the interrupt to findout
when the data is ready for fetch. The sample fetch
will be blocked for a specified maximum time untill
the interrupt happens.
* Make operation mode configurable in DTS file
* Make offset cancellation configurable in DTS file
* Use single common .yaml file for both i2c and spi
* Store above configurations in dev->config_info
Signed-off-by: Masoud Shiroei <masoud.shiroei@assaabloy.com>
Remove unnecessary "\n" at the end of logs.
Change LOG_DBG to LOG_ERR wherever is appropriate
Signed-off-by: Masoud Shiroei <masoud.shiroei@assaabloy.com>
This commit creates two new files in the device tree
1. stm32l412X8.dtsi
2. stm32l412XB.dtsi
This will specifcally add stm32l412X8 to the device tree
which was not supported before. Also the memory
for stm32l412XB was not defined specifically before.
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
Current implementation of poll prepare/update could end up busy looping
if `poll()` function was called before/during DTLS client handshake
(i. e. `poll()` called before an initial `send()`).
Fix this, by monitoring the handshake semaphore, already available in
the tls_context structure for DTLS client instead of underlying socket.
After the handshake is complete, switch to monitoring the underlying
socket instead.
For DTLS server this is not needed, since the handshake is initiated in
the `recv()` function, therefore any incoming data should trigger the
handshake.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
- When malloc() is called with a size of 0 we should not set errno
to ENOMEM as there is no actual allocation failure in that case.
This duplicates the realloc() behavior.
- Put unlock_ret assignments on separate lines, otherwise gcc complains
about unused variables when the tests on it are disabled.
- There NULL return added in 952970d6cb are completely pointless.
First, there is no reason for sys_mutex_unlock() to fail, and even
if it did, those returns would be blatent memory leaks. Remove them.
No one should blindly modify code just to make static code
analysers happy.
- Replace all CHECKIF() by explicit assertion statements to uniformize
those checks and drop the NULL returns entirely. We can't return
anything in the free() case, and there are no runtime conditions
for sys_mutex_lock() to sometimes succeed and sometimes fail anyway.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Fix 2 resource leaks issues of coverity scan, actually the return of
NULL pointer is expected, but there is no harm done to free a NULL
pointer in our design, so adding them to pass the scan.
Fixes#33802 CID: 220434
Fixes#33785 CID: 220451
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Do not run workflow on each issue change, instead run every 10 minutes.
Running this on every issue open/close/label will cause reaching API
call limit very fast when issues are automatically created from coverity
or during bug triaging sessions.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix the calculation of event delay when starting a radio
event. The calculation and check was incorrect causing
event abort when radio event was setup before the preempt
timeout by the lll_done when the next prepare was already
in the pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When a CIS indication is received and CIG ticker is already started,
calculate the absolute time of the first subevent of the new CIS,
and validate the handle. This will allow the LLL prepare to see a new
valid CIS, and calculate the offset within the CIG event, where the new
CIS should start. This offset is then valid for all following events for
the duration of the CIS.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Add missing #if defined(CONFIG_BT_CTLR_DF_ADV_CTE_TX) statements
to fix build errors of Direction Finding code when
the CONFIG_BT_CTLR_DF_ADV_CTE_TX Kconfig entry is not set.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Enable possiblity to use debug pins for controller debugging
purposes with nrf52833dk_nrf52833 board.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Splits the file into radio_nrf5_ppi.h and radio_nrf5_dppi.h
and moves the nRF53 DPPI to radio_nrf5_dppi.h.
Signed-off-by: Aurora Sletnes Bjørlo <aurora.sletnes@nordicsemi.no>
Rewrite to use subscribe and publish functions for the
different peripherals. This will make it possible to test
the controller in a simulator.
Signed-off-by: Aurora Sletnes Bjørlo <aurora.sletnes@nordicsemi.no>
Explicitely mention that these files are intentionally empty. These
changes should make compliance checks pass.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Format the configuration file so that it is more consistent (e.g.
uniform usage of single/double quotes).
Some minor cleanup performed too: removed some comments and a default
setting.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Switch to pathlib to make configuration more readable. sys.exit has been
replaced with an exception so that in case of failure error is displayed
(error details were hidden).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Organize configuration sections per group (project, general, HTML,
plugin options...).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It is easy to have out-of-date comments since Sphinx settings evolve
(defaults, behavior...). A reference to the official documentation is
provided at the top of the file instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manpage, texinfo and htmlhelp builders are not used, so remove their
settings as they are redundant.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove options that are commented out from conf.py. It improves
readability of the file.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move static content to _static. It is better to prefix all Sphinx
related folders with an underscore to emphasize that the folder does not
contain actual documentation. Static content gets copied into _static
folder when documentation is built, so it also makes things more
consistent.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some of the generated documentation depends on the devicetree scripts.
E.g. the bindings index uses edtlib.
We don't have a well-defined interface boundary here for managing
dependencies, so let's just add the entire dts directory to the
'paths' glob list in doc-build.yml. This will ensure we don't
accidentally change some DT implementation detail in a way that breaks
the docs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The jlink runner performs a version check which is skipped on
Windows. If running inside WSL we also need to skip.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Allow a custom (remote) gdb host passed as a debug argument
which tries to connect to an existing one instead of creating one.
This also allows to run the gdb server outside of a WSL
in Windows and the debugger inside of the WSL environment.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Carlo Caione