In stm32 dtsi linux files, uart generic node name is serial.
Rename uart node names of stm32 dtsi files from uart@ to serial@
Change-Id: Iac5cbf7955f23cee520bc1790b0f324a17bfcf9e
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit fixes uart only nodes situation for stm32 devices.
st,stm32-uart yaml description is added to enable compilation
Change-Id: Iea78693bdfb90fbb09612b75685ed7ca0ccca6d6
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add configuration, dtsi and memory configuration fixup for the
STM32F469XI High Performance SoC.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The chosen property that sets which serial port is being used for the
console device wasn't set. Add the property "zephyr,console" to the
Arduino Due, CC3200-LaunchXL, CC3220SF-LaunchXL, and QEMU Cortex M3
boards.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that NXP boards support 'make flash' and 'make debug' via pyOCD and
Segger J-Link, update all the NXP board docs accordingly. Adds a new
generalized OpenSDA document so certain details don't have to be
repeated for every OpenSDA board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Now that we can utilize label in the device tree we can convert to
getting the device name for the Atmel SAM3 UART out of the device
tree instead of from Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we can utilize label in the device tree we can convert to
getting the device name for the TI Stellaris UART out of the device
tree instead of from Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we can utilize label in the device tree we can convert to
getting the device name for the TI CC32xx UART out of the device
tree instead of from Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we can utilize label in the device tree we can convert to
getting the device name for the ARM CMSDK APB UART out of the device
tree instead of from Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we can utilize label in the device tree we can convert to
getting the device name for the NXP Kinetis UART out of the device tree
instead of from Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we can utilize label in the device tree we can convert to
getting the device name for the NRF UART out of the device tree
instead of from Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we can utilize label in the device tree we can convert to
getting the device name for the STM32 UART out of the device tree
instead of from Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add optional label property to be generated as part of the UART yaml
spec. This lets us use the label string in a device tree to generate
the device name (for example CONFIG_UART_STM32_PORT_1_NAME).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If the value of the property is a string quote it on output. This lets
us use things like label properties that will have values of strings.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The stm32f4discovery was incorrectly named and should have been
stm32f4_disco. Also added 96b_carbon_nrf51 that was missing from the
list.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add configuration, pinmux, dts and documentation for the STM32L496G
Discovery board based on the STM32L496AG SoC.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Update Cube version for STM32L4XX family
from version: V1.6.0
to version: V1.8.0
Add support for following soc:
stm32l496xx
stm32l4a6xx
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
As we now only support DTS for ARM based SoCs we can remove any
associated !HAS_DTS bits in Kconfig. The Nordic NRF5 serial driver and
the ARM CMSDK APB serial drivers had Kconfig bits related to !HAS_DTS
builds.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since we now select HAS_DTS from the cortex-m Kconfig we don't need it
in 96b_carbon_nrf51_defconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* Change emsk to EM Starter Kit
* Fix some typos
* Add more statement for steps of using EM Starter Kit
Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
Due to support updated from 2.2 to 2.3, a debug script is provided
for emsk, so developer can directly debug the zephyr application
using commands such as follows.
+ make BOARD=em_starterkit debug
Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
Here are the main changes:
* board: Update EMSK onboard resources such as Button, Switch and LEDs
+ update soc.h for em7d, em9d, em11d
+ update board.h for em_starterkit board
* arc: Add floating point support and code density support
+ add kconfig configuration
+ add compiler options
+ add register definitions, marcos, assembly codes
+ fixes in existing codes and configurations.
* arc: Update detailed board configurations for cores of emsk 2.3
* script: Provide arc_debugger.sh for debugging em_starterkit board
+ make BOARD=em_starterkit debug
This will start openocd server for emsk, and arc gdb will connect
to this debug server, user can run `continue` command if user just
want to run the application, or other commands if debugging needed.
+ make BOARD=em_starterkit debugserver
This will start an openocd debugger server for emsk, and user can
connect to this debugserver using arc gdb and do what they want to.
+ make BOARD=em_starterkit flash
This will download the zephyr application elf file to emsk,
and run it.
Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
There is not enough memory to run the HTTP server sample
application in Arduino-101 so remove the config file.
Jira: ZEP-2157
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The address family of the UDP port listener was not set. This
caused weird debug prints in net-shell. Now the listener will
be registering IPv4 any address as it should.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When a connection handler was registered, the checker function
introduced in commit 43b37cef ("Check duplicate UDP/TCP connection
handlers") did not check the address family (IPv4 or IPv6) of
the local end point properly. This caused duplicate connection
error to be returned to the caller.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the new option for running sanitycheck on multiple nodes and cleanup
unused and obsolete checks.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This tests enables all networking features and requires lots of RAM, so
increase the available RAM to avoid failures due to not enough RAM when
building.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Provide 5 micro sec delay after power change to analog comparator to
get it stable. If delay is not given, we observed some instability and
it generates random interrupt.
Jira: ZEP-1438/ZEP-1927
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Change reference voltage for Analog comparator to Internal reference
voltage.
Currently AIO is using External reference voltage (Reference A) and
external reference is set at 3.3V. In this usecase both reference
Voltage and AIO IP are set at 3.3V. So rising edge interrupt behaviour
will be unpredictable.
So by changing internal reference voltage to Internal (set at 1.09V)
interrupt will be generated as soon as Voltage on I/P will exceed it.
Jira: ZEP-1927
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
AIO should be supported on more platforms. Adapt
this case to make it run on more platforms.
Also keep reference voltage for comprator as internal.
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
Add instructions to build the DTC from Windows, note that the following
2 caveats apply:
* The flex version needs to be pinned to 2.6.0 because of a bug with the
current MSYS2 flex
* The repository to clone DTC from is currently my own on GH while
waiting for a patch to be accepted upstream
Additionally this removes the python2 requirement and adds documentation
on installing pip an pyaml.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
It's not obvious which kernel release version you're reading about in the
documentation. Add the version info in the breadcrumb header (instead
of "Home / Docs / Subsystems /" show as
"Home / Docs / 1.8 / Subsystems /").
(Depends on docs-theme PR-9, but can be merged now with no ill-effect)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fixes sparse warning:
<snip>/zephyr/kernel/sched.c:368:6: warning: symbol '_dump_ready_q' was not declared. Should it be static?
Change-Id: I156e89f1d74178bbd99cc25e532da544c7ebee60
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Fixes sparse warnings:
<snip>/zephyr/kernel/timer.c:15:16: warning: symbol '_trace_list_k_timer' was not declared. Should it be static?
<snip>/zephyr/kernel/sem.c:32:14: warning: symbol'_trace_list_k_sem' was not declared. Should it be static?
<snip>/zephyr/kernel/stack.c:24:16: warning: symbol '_trace_list_k_stack' was not declared. Should it be static?
<snip>/zephyr/kernel/queue.c:27:16: warning: symbol '_trace_list_k_queue' was not declared. Should it be static?
<snip>/zephyr/kernel/pipes.c:40:15: warning: symbol '_trace_list_k_pipe' was not declared. Should it be static?
<snip>/zephyr/kernel/mutex.c:46:16: warning: symbol '_trace_list_k_mutex' was not declared. Should it be static?
<snip>/zephyr/kernel/msg_q.c:26:15: warning: symbol '_trace_list_k_msgq' was not declared. Should it be static?
<snip>/zephyr/kernel/mem_slab.c:20:19: warning: symbol '_trace_list_k_mem_slab' was not declared. Should it be static?
<snip>/zephyr/kernel/mailbox.c:53:15: warning: symbol '_trace_list_k_mbox' was not declared. Should it be static?
Change-Id: I42d55aea9855b9c1dd560852ca033c9a19f1ac21
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Fixes sparse warning:
<snip>/zephyr/zephyr/misc/printk.c:50:5: warning: symbol '_char_out' was not declared. Should it be static?
Change-Id: I5af0860e9f8f827002ae9a142b5924d3de8d51b6
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Fixes sparse warning:
CHECK <snip>/zephyr/kernel/thread.c
<snip>/zephyr/kernel/thread.c:184:20: error: symbol '_thread_entry' redeclared with different type (originally declared at <snip>/zephyr/kernel/include/nano_internal.h:43) - different modifiers
CC kernel/thread.o
Change-Id: I2223493cdf97c811c661773f8fd430e6c00cbaa0
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Erwan Gouriou