For the native_posix backend, use the appropiate tracing
functions and enable color if it should be
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
tests/subsys/logging/log_core does not work if inplace processing
is set and the process thread is disabled.
So let's set the valid configuration in its project file
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Enable native logger backend for native_posix board in defconfig.
Set also logger configuration options suitable for native_posix
backend.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When CONFIG_LOG_PROCESS_THREAD was not set the logger
was not initialized.
Register a POST_KERNEL init for that case.
Also added an assert in the logger thread in case there
is no backends, instead of having that thread spinning
forever.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the POSIX arch, time does not pass inside infinite loops.
=> Add a small delay in each iteration of those loops
when compiled for it.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
For native_posix:
Added command line options to control if traces should have
or not colors.
+
Detect if we are connected to a tty or not, and if we are
set the defaults for that option appropriately
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This allows to define shells which are using different syntax for
commands parsing eg. foocmd=param1,param2.
This is usefull for providing compatibility with existing external
tools while allowing to use Zephyr's shell subsystem.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
None of the data for the CEP, CUD and CPF descriptors needs to be
modified by the stack at runtime. Make it possible to pass constant
data to the descriptor macros, and make sure the descriptor handlers
cast the data back to be a constant.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update all supported features and peripherals in the official set of
boards from Nordic Semiconductor.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
These mcux dspi driver configs are no longer used after legacy API
support was removed in commit 09dd5e9b22.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
With have *many* violations on Zephyr's code, this commit is tackling
only the violations caused by headers guards. It also takes the
opportunity to normalize them using the filename in uppercase and
replacing dot with underscore. e.g file.h -> FILE_H
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The req variable in smp_pairing_failed() does get used, so
ARG_UNUSED() is inappropriate for it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Just like we set the address for an identity without depending on the
BT_DEV_READY flag, we should do the same for the IRK. Otherwise we
risk getting an all-zeroes IRK. Remove the condition and always set
the IRK value whenever CONFIG_BT_PRIVACY is enabled.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code creating identities from the Read_Static_Addresses vendor
command was failing to create matching IRKs, resulting in an
all-zeroes IRK to be used. Fix this by using the existing id_create()
function which takes care of generaing an IRK when necessary.
Fixes#10003
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A subsequent patch will make bt_setup_id_addr() depend on id_create()
which was so far lower down in the hci_core.c c-file. Move
bt_setup_id_addr() further down to avoid a forward declaration.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix the Id of the longarray message.
Also change the display of the "Address" entry to use "Id" instead of
"Entry" to be consistent the other displayed entries.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In case a write to the flash failed, do not leave the flash unprotected.
Always call flash_write_protection_set in that case.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Avoid unsetting and setting the flash protection if there is nothing to
write to the flash. This happens for example when deleting data from the
flash using nvs_delete.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In case a sector is not empty nor properly closed (ie it never contains
8 times 0xff nor 0x00), the _nvs_prev_ate will loop indefinitely and
will start adressing memory outside of the flash area.
Fix that by stopping the loop when the address matches the beginning of
the sector.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Instead of forcing the crc8 entry to 0xff for the crc8 computation, just
ignore this field in the computation as it is the last one. This avoid
having to set it back to the original value for _nvs_ate_crc8_check.
Add a build assertion to ensure crc8 is kept last.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The allocation table entry should be as small as possible in the flash,
so declare it as packed to avoid that the compiler pads it.
Note that this doesn't change anything on ARM, but it might help for
other (future) architectures.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
- Add a missing plural.
- Use a comma to separate the sector number with the offset to not
confuse that with a range.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Update menuconfig.py to upstream revision 35a60b786c646.
This fixes some minor graphical glitching, with parts of lines that
don't fit the terminal wrapping around to the next line, and some
headings disappearing.
This version also adds supports for custom style definitions,
contributed by Mitja Horvat (punkfluid). Colors can be specified both by
number and in #RRGGBB notation. Color accuracy varies depending on
terminal capabilities, but will usually be good.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
When no certificate-based ciphersuites are used, mbedTLS compiles out
hostname field and associated functions from its SSL context. This
resulted in compilation error when only PSK-based ciphersuites were
configured.
This commit resolves the issue by compiling-out hostname-related code
from secure sockets implementation on the same basis as mbedTLS does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The differentiation between the MCUs is handled in the HAL from Silabs.
So all EXX32 MCUs should use the same soc.c file.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
To move forward and remove use of Kconfig in dts files lets just create
SoC specific dtsi files that the boards can include. This lets us
remove:
CONFIG_SOC_NRF51822_QFAA
CONFIG_SOC_NRF51822_QFAB
CONFIG_SOC_NRF51822_QFAC
CONFIG_SOC_NRF52810_QFAA
CONFIG_SOC_NRF52832_QFAA
CONFIG_SOC_NRF52832_CIAA
CONFIG_SOC_NRF52832_QFAB
CONFIG_SOC_NRF52840_QIAA
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To move forward and remove use of Kconfig in dts files lets just create
SoC specific dtsi files that the boards can include. This lets us
remove:
CONFIG_SOC_PART_NUMBER_SAME70*
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we have a common DT_SIZE_K macro use it instead of defining
__SIZE_K eveywhere. We also have DT_SIZE_M, so use that in a few
places as well.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A blank line is needed after '.. code-block::', or the code gets
misinterpreted as RST parameters:
...doc/subsystems/logging/logger.rst:168: WARNING: Error in
"code-block" directive:
maximum 1 argument(s) allowed, 9 supplied.
.. code-block:: none
module = FOO
module-str = foo
source "subsys/logging/Kconfig.template.log_config"
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The RTC node for some reason was setting #address-cells and #size-cells.
However it has no children so there isn't really any reason to do this.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Alberto Escolar Piedras