Improves documentation consistency by using "N/A" instead of "None"
when the routine does not return a value.
Change-Id: I429a159b3037742cbc431db0cb4828ab9d6d35c3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic stack routines:
nano_stack_push()
nano_stack_stack_pop()
nano_stack_pop_wait()
Those routines are convenience wrappers for invoking the task, fiber and
ISR (if applicable) specific implementations.
Change-Id: I6e7bb2ca69bb2e3d5ed955654390746e76e4ab92
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic semaphore routines:
nano_sem_take()
nano_sem_take_wait()
Those routines are convenience wrappers for invoking the task, fiber and
ISR (if applicable) specific implementations.
Change-Id: I09d715d07263eb0ee526231120ba65d1e3feebce
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic lifo routines:
nano_lifo_put()
nano_lifo_get()
nano_lifo_get_wait()
nano_lifo_get_wait_timeout()
Those routines are convenience wrappers for invoking the task, fiber and
ISR (if applicable) specific implementations.
Change-Id: I5252e4643fe4772f1309b26c1b3e4319f5035956
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic fifo routine:
nano_fifo_get_wait_timeout()
That routine is a convenience wrapper for invoking the task or fiber
specific implementation.
Change-Id: I9bd709ea416db834e2a0c5de81257c363e7db066
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This lists all supported board by looking at configs/ and other
locations with defconfig files.
Change-Id: I48ed260543adfeacbc089f403f948010ea6f978e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When building for a certain platform, we have no idea
what architecture we are building for.
We used to specify the architecture alongside the board or platform
name and this was used to find the defconfig in arch/<arch>/configs.
By putting all board configurations we support in one place we do
not have to specify the architecture, just the configuration name.
Change-Id: Ib7e9f63b9a8051714dc207f583fd26ef620497d8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not depend on host architecture and use architecture definition
from the defconfig file of the board.
Change-Id: Idb3dd42524f26bd167a34d6eb024d4d9816e9730
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use CONFIG_PLATFORM to only build the selected platform. This
makes the makefile with drop-in platforms, does not need to be
changed for any new platforms.
Change-Id: I21f4bd88b04a7e53bc80b9710b1e7668def4e407
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use CONFIG_PLATFORM to only build the selected platform. This
makes the makefile with drop-in platforms, does not need to be
changed for any new platforms.
Change-Id: I8720ba1501b6e1929bfec294f5bb1c7466d65049
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not repeat the same flags for every added platform. Define
the common flags on the architecture level instead.
Change-Id: I0e501d6a909892dd682b106fb2a5072434a39563
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use CONFIG_PLATFORM to only build the selected platform. This
will enable support for drop-in platforms. Makefile will not need
to be changed for every new platforms.
Change-Id: I22778e8242422e487e941143df3e521b33f2b0a8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move platform related data and definition to the platform
directory and include it using:
arch/<arch>/platforms/*/Kconfig.platform
This way we will able to add a platform as a directory of
content without the need to change and Kconfig files.
Platforms can then be included by reference (using repo or
git submodoules)
Change-Id: I6bff4e48490e33cbaf879fe3c424bf2f6a4887ac
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not reference every platform, instead use the platform
name to tell make what to build.
Change-Id: I7498da7cdcdada754466222902f59fe4c6487d89
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move platform related data and definition to the platform
directory and include it using:
arch/<arch>/platforms/*/Kconfig.platform
This way we will able to add a platform as a directory of
content without the need to change and Kconfig files.
Platforms can then be included by reference (using repo or
git submodules and does not need to be part of the zephyr
project)
Change-Id: I5e71f5394c22edb346f7d61d9448b8e1c68e1f9b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When generating documentation for kconfig options, support
wildcards to be able to parse all relevant files.
Change-Id: Ifa565e3809996fcd13b0f15d61a4ffb108c1aa0a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This allows using wildcards with kconfig files so there is no need
to include individual files within a well define tree structure.
For example, you add
source "drivers/*/Kconfig"
and all Kconfig files under drivers/ will be sourced and the order in
menuconfig will be based on the wildcard processing, not in any particular
order.
The main advantage here is that drivers and platforms become drop-ins, a platform
or a driver can be added by just placing it in the right place without having to
change system Kconfig files or Makefiles (Makefiles will be supported in other change).
Change-Id: Id223ba10e6f48b4c48435e9ea37885162ce55e7c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Text files on windows are be created with a different format
for line endings. This commit improves the host tool 'fixdep' to
support files with the windows-style line endings.
Change-Id: I1d120790c5cbb1f1e7df6761821bc7e01c99b988
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
In order to keep the code compatibility with Linux and Windows, the flag
O_BINARY is defined as zero when we are compiling in a Linux host. But
when compiling in a Windows host, we have to use the definition of the
flag provided by the host's includes. Currently, there is a custom macro
to identify if the host is a Windows host. This commit change that custom
macro for the macros that compilers provide to avoid defining a new one.
Change-Id: Ifeeab17c68d07039bd5b4a80c8263d338e6448ce
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Provide the proper irq for i2c, gpio and spi. And make relevant drivers
getting enabled easily once their domain is selected.
Change-Id: Ib8a428e11b6163a1b370b23baa34ea2fab733565
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Provide the irq flags to IRQ_CONNECT_STATIC
- Provide the actual IRQ for that controller
Change-Id: If660baca7e92065cfdb588a2ae86ff13da0918eb
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Without that, it won't built when enabling support for dw i2c in
quark_se-x86.
Change-Id: Icce26488d870c273516dc9f34555176122bcb9c8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Build the actual driver when relevant
- Provide the IOAPIC stub
- Provide the IRQ flags for IRQ_CONNECT_STATIC
- Set the default IRQ priorities
Change-Id: Iea20ef67c92cf7f48791fba5a8021448b7059950
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
SYS_GET_DEVICE() needs the name set in DECLARE_DEVICE_INIT_CONFIG() not
the one in IRQ_CONNECT_STATIC().
Change-Id: Id1ed66953c863531411b34594ffed669ad524ef5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
That fixes a build error. Platfom's board.h have to provide such flags
if they enable dw gpio 1 controller.
Take the opportunity to provide the right isr to IRQ_CONNECT_STATIC.
Change-Id: I16900ea04f7f7c5d3c99b93a92b00c1f651494de
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Original name was too generic and confusing. This patch renames
driver to pipe UART and moves it to console drivers folder. Kconfig
destription is also improved.
Change-Id: I716fdbf7d636bbdc03b0fce27a59fd866f473246
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This refactor the way stored keys are handled to avoid overwriting
existing keys with new keys in case of pairing failed. Main goal is
to delay update of keys (including type and encryption size) until
link is succesfully encrypted with new key (legacy STK or LE SC LTK).
To fix this properly, TK is used to store STK or LE SC LTK and updates
of keys properties are done only on successfull encryption. This makes
code less error prone since update is done only in one place in code.
Also quering SMP code for current key makes sure that correct keys is
used in case of re-pairing.
Change-Id: I6b9e3d8229de522143e0d1fbfe0bd8223dad2a56
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need to always look-up for keys on security request.
Instead use cached keys if present, if not update cache.
Change-Id: I375842beb4c461418aea6a40350f797ca7b6264c
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Looking up for CSRK to sign local PDU or verify remote signature
shouldn't add those keys in case those are not present (which is
done by get function).
Change-Id: Iec271a9dddd2cd319f153cec6e19fc2408ee0896
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If the beacon support is activated, then we join the network
and start to send beacons.
Change-Id: Iffd0f05008e6a2463debb53ca73eb142ff60488a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can enable 802.15.4 beacon statistics support.
The 802.15.4 stats are printed periodically together with other
statistics.
Change-Id: I844a27224017a9d28cdbc166471523aa366da315
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can select whether the beacon support is activated or not.
Change-Id: I8fd22af73cfca0dd4f2182bf98bc4b3571ac1f8f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This refactor code that is used to generate LTK and DHKey check value.
Duplicated code is factored to helpers reducing code size. Resulting
code is simpler and much easier to understand.
Change-Id: I1bb5a72959b9196bc472f069e9be5857d38dbcad
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch adds Exchange MTU command handler to the tester.
It allows to test if GATT Client can initiate MTU Exchange Procedure.
Change-Id: I2e50cec27fb7b944f57a4a6487138adbf126bad4
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds protocol specification for SM.
Change-Id: I9c6ef377d0e4ad261e466dfed3a35713cf79de12
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Selects right ACL Tx MTU and semaphor based on connection link type
and indirectly controller buffers capabilities.
Change-Id: I1df1ba81e6b09d9d5bdcd34a93d9a3d255133143
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Make and use helper functions to get ACL Tx packets max length (MTU)
and get semaphore syncing out Tx packet to controller.
Change-Id: I52f60a71c6b179ff300b4fd21da27174e9d825d9
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
If the SDU length is bigger than the amount data received in the first
packet it means it will be segmented in 2 or more packet until the SDU
is completed.
Since the MTU required by the upper layer could be much bigger than the
ACL buffer the code now request a buffer to reassemble the SDU.
Change-Id: I286d16e185f59a8128c4357dddebdc13145dfe31
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This use struct nano_sem to control the credits so when sending if the
credits hit zero it now waits more credits to continue instead of
failing.
Change-Id: I2da4692eaa16828f74a1df4346583258bb4cf8f0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_l2cap_chan_send which can be used to send data to
dynamic channels resulting in the following trace:
< ACL Data TX: Handle 3585 flags 0x01 dlen 17
Channel: 64 len 24 [PSM 128 mode 0] {chan 5}
a0 02 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
ff ff ff ff ff ff ff ff ........
Change-Id: I753e301b1125ef21a345ab96470f15bc53a4869a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add characterictic command requires to provide service ID to which this
characteristic shall be added. With this patch initialization will
succeed only if service with given ID exists.
Change-Id: Ie6223f293b4cac06f211556d29896b2e1ccd96ac
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Adds support to connection object allowing to set the link type.
At the moment only LE link is used since LE connection handling
is implemented when BR/EDR support is enabled.
Change-Id: I5204a93670308b0151deaa98106a1551b9b39493
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Peter Mitsis