Add optional value parameter to dt_compat_any_has_prop
kconfig preprocessor function, which puts an additional constraint on
the truth of the function in that the property value must match the
parameter value.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
By defining this snippet it becomes simpler to build an application
for the Zephyr Bluetooth Controller in environments
where this is not enabled in device tree by default.
It removes the need for adding boilerplate overlay files
to applications.
Also, we would be able to add this snippet by default for
samples and tests where it is required to use the zephyr
link layer.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Reset value of this register is supposed to be 0 but I noticed on some
chip, it was not resetting to 0 on system reset, don't know why, but
this supposedly redundant clear is fine for now.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
These properties should eventually be removed from this binding as they
have been introduced to control soc specific clock trees and don't
correlate to anything in the IP, but for now just make them not required
and remove them from DT for SOCs that don't even use them.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
WS25Q512JV can only run at 104MHz at 3.3V, unless the read parameter
bits are changed. Since we don't reprogram these currently, reduce max
frequency to safe value
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This is a bug fix for adxl362_temp_convert_q31 and
adxl362_accel_convert_q31 functions.
Functions are used to convert samples received from
sensor to q31_t format when RTIO stream is used.
Signed-off-by: Vladislav Pejic <vladislav.pejic@orioninc.com>
For tests that support both targeting unit_testing and
other targets, we check in the cmake code the BOARD variable.
Let's allow users to set this to either of unit_testing
or unit_testing/unit_testing so it behaves like for other
tests.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix filtering done in
22c3438f1b
Otherwise we end up with tests defined twice, as a .unit and .zerphyr
variant but both run in normal builds, and none for unit tests.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Use full board name in cmake file.
Akin to the fix done in
https://github.com/zephyrproject-rtos/zephyr/pull/80270/
following the changes from
https://github.com/zephyrproject-rtos/zephyr/pull/77250/
Note after the Zephyr cmake code has been run the BOARD
variable is split into BOARD BOARD_QUALIFIERS,
where BOARD does not contain the qualifiers anymore
(see cmake/modules/boards.cmake for more info).
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The truncation is not possible in practice but add suitable cast to
avoid the warning.
samples/net/sockets/echo_server/src/tcp.c:297:54: warning:
‘%d’ directive output may be truncated writing between 1 and 10 bytes
into a region of size 5 [-Wformat-truncation=]
297 | snprintk(name, sizeof(name), "tcp4[%d]", slot);
| ^~~~~~~~~~
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The NET_SOCKET_SERVICE_SYNC_DEFINE_STATIC() macro was changed
earlier but the compilation error was missed. Fixing the macro
call.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The value of err was not initialized to 0 prior
to calling shell_strtoul, which only sets err
on actual error.
Signed-off-by: Lars Knudsen <LAKD@demant.com>
As the socket service API is currently used by mutiple applications
(dhcpv4 server, dns, telnet), it should be marked as unstable,
according to the docs:
https://docs.zephyrproject.org/latest/develop/api/api_lifecycle.html
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Fix the following warnings:
[255/261] Linking C executable zephyr/zephyr_pre0.elf
lto-wrapper: warning: using serial compilation of 8 LTRANS jobs
lto-wrapper: note: see the '-flto' option documentation for more
information
[260/261] Linking C executable zephyr/zephyr.elf
lto-wrapper: warning: using serial compilation of 8 LTRANS jobs
lto-wrapper: note: see the '-flto' option documentation for more
information
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Functions related to synchronization inputs and request generators were
present in the DMAMUX driver, despite being completely unused.
Remove them for compatibility with WB0 which lacks this hardware.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Remove the "required: true" attribute from the STM32 DMAMUX binding.
This is required for STM32WB0 series where the DMAMUX has no interrupt line
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
PR #79683 missed a few nodes introduced while it was under review.
Replace the remaining raw values with STM32_CLOCK in WB0 DTSI files.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
If PM is enabled, the radio must be configured to synchronize its
protocol timer with the low frequency timer.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Only initialize the HFXO Manager HAL driver if the HFXO is enabled in
DeviceTree, the device uses SYSRTC for timekeeping, and Power Manager
is enabled. HFXO Manager integrates with the Sleeptimer HAL driver for
SYSRTC to autonomously wake the HFXO prior to Sleeptimer wakeup from
deep sleep. It is not needed on devices that don't have HFXO-SYSRTC
integration, and it is not needed if the application doesn't use deep
sleep.
Add missing call to init_hardware() prior to init().
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Add basic device power management to USART driver. The initial
implementation only ensures that the TX FIFO is flushed before
allowing the system to go to sleep by polling the TXIDLE status
register.
This fixes an issue where the last 1-2 characters would be lost
if transmitted immediately before going to deep sleep.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
In addition to 'footprints' application data, execute transformation
step for all other applications listed in `plan.txt` to upload their
memory footprint reports to the ELK storage as well.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Fix nrf5340dk/nrf5340/cpuapp board name to align with HWMv2 changes
and resolve build error for its footprint data collection.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Removed the generation of broadcast id inside the stack. It is now up
to the application to generate this by itself. The CAP sample has
been modified to allow either a static broadcast, or a random one.
All of this is handled in the application.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
The 12-bit signed values for the results of PBR are a bit
cumbersome, so this adds a helper function to make it easier to work
with the HCI formatted steps.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
Add unit tests for bt_le_cs_step_data_parse.
Also exit early (without calling the function pointer) if the next
step would seem to read out of bounds.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
To improve broadcast sink sample robostness the max codec meta data
size configuration is increased to reflect the meta codec data sizes
seen for sources in market.
Signed-off-by: Jens Rehhoff Thomsen <jthm@demant.com>
The sys_write32 function expects a value as the first parameter and the
memory location where the value should be written as the second parameter.
Signed-off-by: Nils Bosbach <bosbach@ice.rwth-aachen.de>
Daniel DeGrasse