Poll the flash status instead of just reading the flash status once. Add
support for controlling the number of SDO retries and the SDO timeouts.
These changes allows for greater control of the CANopen program
download, which is especially useful on noisy or congested CAN networks
and on devices with slower flash access.
Fixes: #39409
Signed-off-by: Klaus H. Sorensen <khso@vestas.com>
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Espressif wpa_supplicant depends on mbedtls. Due to latest
update to 3.0.0, a few updates were needed to be compliant
with api changes.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Don't allow to enable multiple register banks / fast
interrupts if we have only one interrupt priority level.
NOTE: we duplicate some checks by adding dependencies to ARC
Kconfig and adding build-time checks in C code. We do it
intentionally as for some reason we can violate dependencies
in architecture-level Kconfig by adding incorrect default in
SoC-level Kconfig. Such violation happens without any
warnings / errors from the Kconfig.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
LOG2CEIL is defined now for all tolchains in
include/toolchain/common.h
so let's drop it's definition for MWDT toolchain in
include/linker/linker-tool-mwdt.h
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Currently all the *-names and *-cells properties are derived from the
name of the base <name>s property. This is a limitation because:
- It forces the base property name to be plural ending in -s
- It doesn't allow the english exception of plural words ending in -es
With this patch we add one additional property 'specifier-space' that
can be used to explicitly specify the base property name.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Suggested-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
1) Allow use of interrup driven instance.
ROM implementation could be selected via dts compatiable.
2) Use UART rx fifo and timeout interrupt for end of message detection.
Added to decrease interrupts count on data reception
3) Use ESP_LL api.
Signed-off-by: Pavlo Hamov <p.hamov@venstar.com>
Replace the custom float32_value_t LwM2M type with native double, to
facilitate LwM2M API and improve floating point precission.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Don't build TF-M in parallel on Windows as it has been reported to
expose dependency issues with the TF-M build system.
These issues will be investigated at a later time.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
RT10xx platforms will fail to build with SPI and Ethernet enabled due to
a pin conflict. Exclude them from the ethernet build test as it enables
SPI and will fail.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
MCUXpresso SDK sets the drive strength of LPUART and LPI2C pins to 4 for
this SOC, versus 6 for most other RT10xx boards. Update the pinmux.c
file for mimxrt1010_evk to reflect this.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds SPI support on LPSPI1 to the RT1010. LPSPI1 is available on pins
6, 8, 10, and 12 of J57 on the evaluation board
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit enables the LPSPI1 peripheral on the RT1015 EVK. LPSPI pins
are not populated by default, but headers can be added to J19 on the EVK
to access these signals
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for LPSPI to mimxrt1024_evk. LPSPI1 is exposed on pins
6,8,10, and 12 of J19 of the evaluation board
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
SPI support is available on LPSPI1 and LPSPI3. Both of these require
board modifications to expose headers. LPSPI1 is used for testing,
and requires that the board have solder jumpers R278, R279, R280,
and R281 bridged.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
SPI support is available on LPSPI1 and LPSPI3. Both of these require
board modifications to expose headers. LPSPI1 is used for testing, and
requires that the board have solder jumpers R278, R279, R280, and R281
bridged.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
RT1050 has multiple LPSPI peripherals. The simplest to access is LPSPI1,
which can be connected by bridging solder jumpers on the board. Enable
this SPI peripheral, and set it as default for SPI tests.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
PR adds testing of subscription of the tree of extended models.
Extended models should share subscription list among them.
Signed-off-by: Aleksandr Khromykh <Aleksandr.Khromykh@nordicsemi.no>
cAVS 1.5 has little RAM, force COMP_SRC_TINY to fix SOF build
failures under Zephyr with XCC.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Create a template for nominating GitHub users for an elevated
permission levels. Update the TSC Project Roles page to reference the
nomination template and add clarity to the GitHub permissions allowed at
each level.
Signed-off-by: Keith Short <keithshort@google.com>
In the case where the aligned memory range is on top of the allocated
memory range, freeing the 0 sized top unused memory will trigger
an assert in the virt_region_free() call since vaddr could be equal
to Z_VIRT_REGION_END_ADDR.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The NET_DEVICE_DT_DEFINE_INSTANCE() macro was passing an invalid
dev_name to Z_NET_DEVICE_INIT_INSTANCE(). Change this parameter to get
device name based on the node_id, matching other macros.
Signed-off-by: Keith Short <keithshort@google.com>
When CLOCK_CONTROL_NRF_FORCE_ALT is enabled then calibration is
performed outside of the driver. In that case certain Kconfig
options where present which were dedicated for case when calibration
is performed by the driver. Side effects of those options lead to
conflicts when CLOCK_CONTROL_NRF_FORCE_ALT was enabled. Fixed
those conflicts by introducing Kconfig option which indicates
whether calibration is performed by the driver or not.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
tracing.osawareness.openocd relies on the CONFIG_THREAD_NAME is
enabled, however we don't enable it in test config.
Fix that.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The tracing.osawareness.openocd doesn't support executing
on multicore Zephyr. However we disable multiple CPUs
usage in two different ways for this test:
- by setting CONFIG_MP_NUM_CPUS to 1
- by setting CONFIG_SMP to n
It's not correct for all SMP platforms to disable SMP. As
it is also excessive (we can guarantee the execution on
single core by setting CONFIG_MP_NUM_CPUS=1) let's drop
SMP disabling.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Commit 3f6737f688
("doc: autopts: Remove duplication of getting started guide") removed
duplicated text by linking to the getting started guide.
However, the link format is not correct. It is using a link to the
latest upstream Zephyr getting started guide. This has two problems:
1. It will link to the wrong document when the autopts guide
is part of an official release documentation. For example,
the Zephyr 3.0 release documentation HTML page for these
docs will be linking to the main branch GSG, not the v3.0
getting started guide. This combination will not be correct
in general because dependencies change.
2. It breaks downstream distributions which bundle their own
versions of the Zephyr documentation as well, for similar
reasons.
The two documents are part of the same Sphinx docset, so the right way
to do this is with :ref. Fix it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
If a driver doesn't support PM, as indicated by setting the
pm_control_fn parameter to NULL, no need to manage busy or wakeup state.
This also prepares the PM support for issue #39286, which will allocate
PM structures only for the devices that request it.
Signed-off-by: Keith Short <keithshort@google.com>
Add the pm_control fn to the dummy_driver so the full PM API is tested.
This change also bypasses all PM APIs if the device driver doesn't
support PM.
Signed-off-by: Keith Short <keithshort@google.com>
Model descriptions in Kconfig.ssd1306 should be ssd1306 instead of
ssd16xx, these may be copied from driver for ssd16xx.
Signed-off-by: Huang Qi <no1wudi@qq.com>
- Per datasheet (Rev 1.0, Page 29): When enabling adv_power_save, there
needs to be a 1ms inter-write registers delay. With this addition, the
driver will work at SCLK frequencies faster than 100kHz.
- Added helper function reg_write_with_delay() to factor these writes.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Henrik Brix Andersen