Use auto-generated device tree macros in LPS25HB driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LSM6DS0 driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use the new DT_<COMPAT>_<INSTANCE>_<PROP> defines to instantiate
devices. This commit adds also ability to define individual pin
locations on SoC series that support the feature. Definitions of GPIO
pins assigned to a given location have been moved from soc_pinmap.h file
to board DTS file.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Previously, only led0 was enabled.
This allows the samples/basic/disco sample to build/run for
this board.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Convert usb_dc_stm32 driver GPIO disconnect to use new defines so we
can remove the dts_fixup.h code for it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We have moved GPIO info to DT so the Kconfig symbols for GPIO lines
aren't used anymore. We can just remove them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move IRQ number encoding out of dts_fixup.h and into the dtsi files.
For now just change devices on the dw_intc.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
1. Fix trailing comment for DT_USBHS_MAXIMUM_SPEED
2. Fix missed CONFIG_USB_HS_BASE_ADDRES that should be
DT_USB_HS_BASE_ADDRESS
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Reorganize the entry page so it's not as jarring of a landing by
reorganizing the content a bit in the rest of the toctree.
This makes it easier to read more progressively without having to jump
around as much.
Signed-off-by: Marti Bolivar <marti@foundries.io>
As example of echo_async_select added recently shows, we no longer
need to define a logger unconditionally in each source file. These
samples are intended to show Zephyr compatibility with POSIX sockets
API, so the less there're differences between Zephyr vs POSIX
ifdefs, the better.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Previously, the net_app layer handled DNS support as a part of
network initialization. With the move to BSD-socket APIs,
we need to add support for DNS to the LwM2M library.
Signed-off-by: Michael Scott <mike@foundries.io>
The LwM2M library has moved from the network application library
APIs to BSD socket APIs. Let's make the needed changes in the
LwM2M sample to follow those changes.
Signed-off-by: Michael Scott <mike@foundries.io>
This commit resets the firmware status to IDLE after a bad
download attempt. Previously, the firmware object would stay
in an odd state and any further attempts to download firmware
would return an error.
Signed-off-by: Michael Scott <mike@foundries.io>
We can save some resources by removing the periodic service thread
and replacing it by queuing the services to the work queue.
Before (reel_board using BT + DTLS)
Memory region Used Size Region Size %age Used
FLASH: 289464 B 1 MB 27.61%
SRAM: 75620 B 256 KB 28.85%
IDT_LIST: 136 B 2 KB 6.64%
After
Memory region Used Size Region Size %age Used
FLASH: 289576 B 1 MB 27.62%
SRAM: 74596 B 256 KB 28.46%
IDT_LIST: 136 B 2 KB 6.64%
Signed-off-by: Michael Scott <mike@foundries.io>
Now that the security data can be loaded into and used from the
security / server objects, we can add support for LwM2M bootstrap.
This is a mode where initially a connection can be made to a server
which can update several LwM2M (including security and server
data) and then trigger a "bootstrap complete". Once this happens
the client will start it's connection process over but now with
the new information.
Signed-off-by: Michael Scott <mike@foundries.io>
In order to support bootstrap mode, we need to store server data
in the security / server objects. Once the connection to the
bootstrap server is made, it will clear these objects and add
new server connection data.
Signed-off-by: Michael Scott <mike@foundries.io>
For bootstrap support, we need to store connection credentials
in the security object. This way the client can start a connection
at index 0 and after bootstrapping, move to the next connection.
Let's add the needed fields and a config item to set the key length.
Signed-off-by: Michael Scott <mike@foundries.io>
Update the parsing functions for JSON used by the JSON data
formatter and enable it in the LwM2M engine.
Signed-off-by: Michael Scott <mike@foundries.io>
The JSON formatter is currently not enabled for incoming WRITE
operations. To update the code in the formatter and not litter
the input context with extra data, let's allow formatters to
store their own user data.
Signed-off-by: Michael Scott <mike@foundries.io>
net_app contexts save the remote address and we use this during
observe notifications and pending handling. If we move to another
network layer such as sockets, then the remote address becomes
harder to reference. Let's save it as a part of the client
context.
Signed-off-by: Michael Scott <mike@foundries.io>
As part of the migration from net_app APIs to socket APIs, let's
stop referencing the net_pkt fragments throughout the LwM2M library.
Establish a msg_data flat buffer inside lwm2m_message and use that
instead.
NOTE: As a part of this change we remove the COAP_NET_PKT setting.
The COAP library reverts to COAP_SOCK behavior.
This doesn't mean we use sockets in LwM2M (yet), it only means we
use the socket-compatible COAP library which parses flat buffers
instead of net_pkt fragments.
Signed-off-by: Michael Scott <mike@foundries.io>
Currently, this will select the needed configs for LwM2M and net_pkt.
During the migration to socket APIs, the net_pkt selections will change
to socket-based selects.
Signed-off-by: Michael Scott <mike@foundries.io>
This board is unmaintained and unsupported. It is not known to work and
has lots of conditional code across the tree that makes code
unmaintainable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Force Operation Mode Strap Override register to disable NANDTree. This
is due to some users reporting PHY entering NANDTree.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Boot PHY initialization timeout, caching mechanism fixes and networking
buffer descriptors moved to no cache section. Enabled cache management
in networking driver and manual barriers.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
As the net-app based echo samples are being removed, there's no use
referencing them any longer in their socket counterparts.
Additionally, overlay configuration descriptions were added in the
same manner original samples did.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixed spelling mistake in shell's Kconfig file.
Updated description in SHELL_CMD_BUFF_SIZE description.
In shell.c: removed obsolete empty line, added empty line
at the end of file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The removed test does the same thing and runs on the same platforms
as already existing samples/boards/nrf52/power_mgr.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit updates the README and sample.yaml in order to signal
that this demo works flawlessly on the nRF51 platform.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit updates the power management sample in order to use
new features introduced by recent changes in the Zehyr Power
Management subsystem. Now, it shows how to use power management
policies as well as how to implement custom power modes.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit ports power management code from nRF52 to the nRF51 SoC,
enabling usage of Zephyr Power Management policies on this platform.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit updates the power management code for nRF52 SoC
series after recent changes in Zephyr power management subsystem.
Changes:
- Removed LPS modes, as they are not supported by HW.
(previous implemntation used CONSTLAT and LOWPWR settings
in NRF_POWER to implement low power modes, however these
knobs should be used only when application needs ultra low
CPU wake-up time).
- Reworked code in order to allow adding custom power levels
on the application level and provide better integration
with power management subsystem.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
We use DT to get the I2C address, so the define that got it from a
Kconfig sybmol isn't used and the Kconfig symbol isnt defined. Remove
this dead code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since the lp3943 led driver still supports both DTS and non-DTS
configuration, we update the code to use DT_<COMPAT>_<INSTANCE>
defines for the CONFIG_HAS_DTS_I2C case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since the pca9633 led driver still supports both DTS and non-DTS
configuration, we update the code to use DT_<COMPAT>_<INSTANCE>
defines for the CONFIG_HAS_DTS_I2C case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since the lp5562 led driver still supports both DTS and non-DTS
configuration, we update the code to use DT_<COMPAT>_<INSTANCE>
defines for the CONFIG_HAS_DTS_I2C case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The disabled test causes crash in qemu_x86, so temporarily disable
it until a proper fix is found.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Peter A. Bigot