Fixes overlay configuration to allow running the test on CI without
externally connecting two pins.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Fix 'drivers.ipc.mailbox' test suite to restore and improve
its testing functionality:
* fix printf() redirection through IPM console.
* fix and check the dummy driver initialization.
* specify correct Twister harness type (Console)
and use matching patterns to recognize the expected
console output.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Remove CONFIG_MMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the mmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
mmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove CONFIG_SDMMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the sdmmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
sdmmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Test was marked build only with filters in each scenario looking for
sdl-dc which is only available on native_sim, so cut the chase and use
platform_only to narrow things down to native_sim directly instead of
building the world to get information we already know.
reduces build/run time from 78s to 17s on invocation of twister with
default options, saves a ton more when running twister with --all.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit fixes minor copyright issues and corrects the compatible of
gpio-stepper with the vendor name as zephyr
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
Clock source is changed from RC_SLOW to RC_FAST_D256 in order
to improve clock precision and avoid tests failing due to
lower precision of RC clock (around 10%).
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
The peer remote device "source_dev" can be retrieved from the
remote-endpoint-label. Direct reference via phandle is not needed.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Instead of fixing csi2rx clock frequencies, set them according to the
pixel rate got from the camera sensor.
Signed-off-by: Trung Hieu Le <trunghieu.le@nxp.com>
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The peer remote device "sensor_dev" can be retrieved from the
remote-endpoint-label. Direct reference via phandle is not needed.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
nrf54h20dk_nrf54h20_cpurad by default has less RAM dedicated for
DMA transfers and default 1k buffer cannot be used for
uart_async_long_buf case. Use custom value.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
One of the test case is performing long transfers using 1k buffers.
For some targets there may be not enough RAM to perform such
transfers. Make long buffer length configurable.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Fix the test for sending frames with the CAN_FRAME_ESI flag set. Sending
frames with this flag set in software is never allowed.
Fixes: 8023a58c2a
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Linter pass makes CI happy and keeps code compliant
with the stylistic guidelines of the project
Signed-off-by: Rafael Laya <rafael_laya97@hotmail.com.com>
This updates the documentation of all the NXP boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Rework overlays and add sysbuild/vpr_launcher folder to allow standard
test configuration for nrf54h20dk cpuppr.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Rework existing nrf54h20dk overlays to allow adding of
nrf54h20dk//cpuppr target.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
In order to allow fiting test in targets with smaller memory make
large buffer configurable through Kconfig.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
It will increase test coverage for adc driver, no test uses
ADC_GAIN_2_3 setting yet.
Signed-off-by: Bartlomiej Buczek <bartlomiej.buczek@nordicsemi.no>
Tests are checking error codes returned from adc_read() and
adc_channel_setup() used with invalid configurations.
Signed-off-by: Bartlomiej Buczek <bartlomiej.buczek@nordicsemi.no>
The ILPS22QS is an ultra-compact piezoresistive absolute pressure sensor
which functions as a digital output barometer, supporting dual full-scale
up to user- selectable 4060 hPa. The device delivers ultra-low pressure
noise with very low power consumption and operates over an extended
temperature range from -40 °C to +105 °C.
(https://www.st.com/en/mems-and-sensors/ilps22qs.html)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Check error codes when sending invalid frames:
- too big data payload;
- wrong set of flags.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
There is negative test for too high data bitrate.
Add test that checks too low data bitrate.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Raffael Rostagno