Add rimage support for the i.MX95 EVK M7-based DDR board
variant. This is only required when running SOF.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Fixes an issue with HWMv2 boards whereby the specified board
revision was not applied at the correct place, which would cause
the target image to fail configuration
Fixes#79208
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The code that handles passing events to and from the controller
resided in the hal_silabs module. This is an integral part of the
HCI driver that it can't work without, and logically belongs in
the driver.
Signed-off-by: Jori Rintahaka <jori.rintahaka@silabs.com>
This manifest update points open-amp to include a fix for unsafe use
of strncpy by by replacing it with internal strlcpy.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Update the HW models module to:
bf8e45bd1f870e49cc15392e045c28d54ea12285
Including the following:
* bf8e45b (52) CCM HAL: Support nrfx 3.7.0 with renamed TASK_CRYPT
* 14c14d7 HW_models/NHW_GRTC: Support MDK not exposing SYSCOUNTERVALID
* 6d66801 RADIO: Improve RSSISTART behaviour
* ceb6a80 hal grtc: Add replacements for new int group functions
* 838aa38 docs/README_HW_models: Add reference to Bsim HW models descr
* 0ff34d7 docs: Several updates and fixes
* 2972a93 AES_CCM: Avoid UBSAN pointer align warnwhen reading CNFPTR
* f8cd477 UART: Minor bugfix: Set rx status to off during ENABLE
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fixes a bug that results in double RX buffer read from ADIN
when generic SPI protocol is used.
Actual frame size to be read must be RX_FSIZE - HEADER.
If we read less amount of bytes, then ADIN raises an IRQ or
signals via Pn_RX_RDY that there is another frame available, as
we fail to read the whole frame.
The fix for "Still some length to go 2" is still present, we drop
the CRC32 bytes from the frame prior allocation and network
stack pass.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
Add the dts and config overlay for the two boards in order
to have the openamp_rsc_table sample working on
HiFi4 DSP from i.MX8QM and i.MX8QXP.
Since these two are similar, use a snippet.
Therefore, to compile the sample we use:
west build -p -b imx8qm_mek/mimx8qm6/adsp -S nxp-openamp-imx8-adsp
-s samples/subsys/ipc/openamp_rsc_table/
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Add mailbox node used for inter-process communication.
For DSP, we have a direct interrupt line to the core.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Add resource_table section in linker script for i.MX8QXP and
i.MX8QM, for inter-process communication.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Not all offloaded network stacks support this socket option so
control it using a Kconfig CONFIG_COAP_CLIENT_TRUNCATE_MSGS,
and enable it by default.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
The `bonded` flag of the callback `pairing_complete` is always true,
event if the SSP pairing is non-bondable.
Check the bonding status in SSP complete event instead of in link key
notify event.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
In current, the bondable flag cannot be configured for each specific
BR connection.
But for LE conn, there is a function `bt_conn_set_bondable` for this
purpose.
Improve `bt_conn_set_bondable` to support BR conn.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
If the return value of function bt_get_bondable is false, clear the
bonding flag when controller requiring `Authentication_Requirements`.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Removes duplicate declaration of the bridging direction, keeping the
one in the public header file.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Adds the `bt_mesh_brg_cfg` prefix to the public Subnet Bridge API, and
aligns the function and callback naming with the rest of the Bluetooth
Mesh API.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Only the device operating at high speed has bMaxPacketSize0 set to 64
bytes, the device operating at other speeds may have a different value.
For full speed, use the value from the full speed descriptor.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
strncasecmp()'s prototype is provided in strings.h
let's include it to avoid a build warning.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Do not override the cmake_args parameter, but instead use the
cmake_extra_args one.
Otherwise we lose the default -DCONFIG_COMPILER_WARNINGS_AS_ERRORS=y
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Several samples used K_FOREVER when allocating buffers in the
system workqueue thread, which is prohibited.
The samples should rather retry later if TX fails.
This is not the ideal solution for the samples, but
fixes a bug. Ideally the samples would use a dedicated thread
to handle TX, instead of the system workqueue.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The SPI stm32 H7 driver always suspends the SPI transaction
when finishing the transceive operation. This, according to
the stm32 H7 datasheet, must only be done when the SPI master
is configured as receive-only, and the driver always
configures it as full-duplex.
Hence, remove this unnecessary operation for clarify and for
a potential reduction in the minimum time between SPI
transceive operations.
Signed-off-by: Daniel Gaston Ochoa <dgastonochoa@gmail.com>
This patch renames the identifiers for the structs in the LLEXT symbol
tables to have a prefix of "__llext_sym_". This is done so existing
scripts like gen_device_deps.py do not confuse them with the object
they are referring to.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Add an option that links in the underlying file system libraries as
usual, but doesn't compile in the Zephyr file system abstraction layer.
This can be useful to avoid linking in the entire filesystem
implementation through the `fs_file_system_t` API struct if only a
subset of the functions are used.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The check for the device being configured or suspended in the fifo_fill
implementation can starve other threads, because the early return does
not change the state of the TX path, and fifo_fill is called again
from the callback loop. The ringbuffer that emulates the TX FIFO can be
filled and marked ready as long as the space is available.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Use delayable work to reduce CPU load when there is no transfer flow in
the host direction. This also improves the performance of poll out, as
introduced in commit commit fed6bde788
("usb: device: cdc_acm: send more than 1 byte in poll out")
for the legacy CDC ACM implementation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
When the controller is connected to a full speed bus, regardless of
whether the controller supports high speed or not, the transfer size for
the bulk OUT endpoint should be equal to the MPS in the current
configuration.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
As it is still accepted practice, allow fifo_fill and poll_out to be
used simultaneously. The lock around fifo_fill was already in place.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Apply changes in commit c152e0980c
("usb: device: cdc_acm: block in uart_poll_out() routine")
to the new CDC ACM UART poll_out implementation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
In general, it mirrors what is described in Interrupt-driven API
documentation, but here a little more explicitly and with a simplified
example, so that we can finally chisel it into the stone.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Align CDC ACM UART with Interrupt-driven UART API behavior description.
Use the same flags in uart_irq_rx_ready(), uart_irq_tx_ready(), and
uart_irq_is_pending(), which are updated after each uart_irq_update()
call. Allow TX FIFO to be filled if there is space.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
`DT_..._REG_ADDR` macros do not always return an unsigned value. This
commit adds and unsigned 32bit prefix to ensure the value is always
unsigned.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
As this is a header, let's explicitly initialize all members of the
struct to avoid a "missing initializer for member" warning in case the
file is built with -Wmissing-field-initializers, or worse, that warning
set to be an error.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add `OPENTHREAD_STORE_FRAME_COUNTER_AHEAD` Kconfig option
and set it to 100000, as after calculations it appears to
be a more suitable value.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
Add a function bt_l2cap_br_get_remote_fixed_chan to get the remote fixed
channels.
If the fixed channel CID 0x0007 is unsupported, skip the LTK derivation.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Laurentiu Mihalcea