This commit adds support for the `drivers.adc` test by adding an overlay
for the `efr32bg22_brd4184a` board.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This commit adds the Gecko IADC driver and support for it to the
efr32bg_sltb010a board.
Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
Signed-off-by: Roman Dobrodii <rdobrodii@antmicro.com>
Secure Element's mailbox is needed for entropy gathering purposes.
Enable it in the EFR32MG24 SoC series Kconfig.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
EFR32MG24 uses the Secure Element's mailbox for entropy gathering
purposes. Reflect that in the device tree structure.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
- Add Gecko BURTC sys_clock driver to handle wake up from EM2,3 states
- Remove custom PM policy and dependency on HAL sl_power_manager service
- EM1 supported in all configurations
- EM2,3 supported only if SysTick is replaced by BURTC
Signed-off-by: Roman Dobrodii <rdobrodii@antmicro.com>
For the POSIX architecture, add options to:
* Clear the flash content at boot
* To delete the file on exit
* To just keep the flash in RAM instead of a file in disk
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
To ease adding overlays in samples and tests for this board
let's include the mem.h definitions in this board dts file.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For users convenience, as it is a typical usecase to
want to see the actual coverage of a set of tests.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Increase the min ram configuration when running
libraries.cmsis_dsp.matrix.unary_f64 testcase
This should have been included in #51883 but was skipped for some reason.
Signed-off-by: Patryk Kuniecki <patryk.kuniecki@intel.com>
This adds tests that validate the implementation handles invalid length
Control Point operations.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This moves ASE Control PDU length validation before request processing.
If the PDU length is not as expected, the operation shall be considered
as invalid. Thus shall be rejected.
ASCS_v1.0; 5 ASE Control operations
"A client-initiated ASE Control operation shall be defined as an invalid
length operation if the total length of all parameters written by the
client is not equal to the total length of all fixed parameters plus
the length of any variable length parameters for that operation"
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This commit removes the unused argument form the `slz_bt_init` function,
and makes it consistent with what `SYS_INIT` expects - `int (*)(void)`.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This fixes sending proper Response_Code in ASE Control Point
notification in case the client initiates Receiver Start/Stop Ready
operation on Sink ASE.
The response that shall be sent according to the specification is
"Invalid ASE direction", while the implementation sent "Invalid ASE state"
instead.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
We do not use them for anything yet, but they do
use a lot of heap, specially for the networking apps
with openthread.
If we need them later we can always add it again.
Moreover, there is an issue is this bsim component
detected by ASAN when loading symbols with too long names,
the issue is fixed in the master branch, but better
if users do not need to update for a component which
is not used.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The efr32bg22-pinctrl.dtsi file was shared between bg22 and bg27 files.
It's better to name it efr32bg2x-pinctrl.dtsi.
Signed-off-by: Krzysztof Boronski <kboronski@antmicro.com>
This commit splits device tree into more logical structure. Peripherals
which are on a board are in board dts files, while those which are parts of
a SoC are in SoC dtsi files.
Signed-off-by: Krzysztof Boronski <kboronski@antmicro.com>
Vendor's P/Ns are volatile and there isn't one yet assigned to the new
BG27 board. Thunderboard-style boards are now all named after the number on
printed on their PCBs.
Signed-off-by: Krzysztof Boronski <kboronski@antmicro.com>
The general structure of efr32b27_sltb010a board is shared by more than one
board. This commit intrduces changes to the organization of board files,
which aim to take that into account.
Signed-off-by: Krzysztof Boronski <kboronski@antmicro.com>
use helper macros from csr.h instead of inline assembly which results
in cleaner and more maintainable code
Signed-off-by: Manojkumar Subramaniam <manoj@electrolance.com>
The possible control endpoint MPS for USB 2.0 FS devices is
8, 16, 32, or 64 bytes. Typically, USB2.0 compliant devices support MPS
up to 64 bytes, and we have not had the need to support other MPS.
This patch implements a mechanism to fall back to the minimum allowed
MPS when a controller is likely a USB 1.1 compliant device and does
not support control endpoint MPS of 64 bytes.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
"flags" is a common variable name and is more likely to be passed
to LOG_DBG() or LOG_ERR() as a parameter. Changing the name of
the local variable created in Z_LOG_MSG_STACK_CREATE() from "flags"
to "_options" make it less likely that someone will pass a parameter
of that name to LOG_DBG() or LOG_ERR() and have that passed value
occluded by the variable created in Z_LOG_MSG_STACK_CREATE.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
tests/drivers/spi/spi_loopback/drivers.spi.loopback on
adafruit_itsybitsy_m4_express fails to build. Fix it by adding
CONFIG_SPI_ASYNC=n.
Signed-off-by: Brandon Del Bel <delbel@umn.edu>
tests/drivers/spi/spi_loopback/drivers.spi.loopback on atsame54_xpro
fails to build. Fix it by adding a CS pin and DMA channels to the board
overlay. Passes on hardware with spi_loopback fixture after change.
Signed-off-by: Brandon Del Bel <delbel@umn.edu>
PC31 is used by the onboard adc connected to SPI as the chip select line
and needs to be unused by afec. Disable afec1.
The adc was using reg1 which implies using the second hardware chip select
which is also not quite right. For software chip select use reg 0 instead.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Remove statement probably left after rebase. ret should be 0 or
error codes, described in docs, and it is rewritten 4 lines below.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The fuel gauge tests should *not* have to enable CONFIG_SENSOR in order to
get access to the sbs gauge emulator.
Allow fuel_gauge sbs_gauge direct access to emul_sbs_gauge.c
Signed-off-by: Aaron Massey <aaronmassey@google.com>
The current headers do not allow the full inlining of the cache
functions. Rework and cleanup the headers to allow for the full
inlining.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Sometimes we want to force the inlining of a __syscall. Introduce a new
__syscall_always_inline symbol to do that.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
To enable IMR on LNL platform new header added to
support context save/restore must be added also to LNL.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
All other watchdog drivers also use POST_KERNEL, and it seems on some
platforms where the TCO watchdog is used not all dependencies are yet set
up by the PRE_KERNEL_1 level.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This commit adds the SiLabs Bluetooth HCI driver. It also enables this
BLE HCI driver on the efr32bg_sltb010a board.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
When ASAN is used cmd_status is kept, but it cannot be linked
as the shell module is not present, this prevents ASAN
being used with the nrf52_bsim.
Fix it by conditionally compiling this code only if the shell is
being used.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update BTP_ASCS_CONFIGURE_CODEC to send codec specific configuration
in LTV format.
Update parameters of BTP_ASCS_CONFIGURE_QOS to match the BT spec
defined lengths.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
When using a dummy buffer on the RX side, do not
increment the destination memory buffer address.
This issue was uncovered when running the SPI
loopback test.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Filip Kokosinski