Always compare unsigned interger type with another unsigned
integer type. Currently in nios2, posix, riscv32, x86 and xtensa
we were comparing the _kernel.nested variable with a signed
interger type. Fixed this violation.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
To allow apps to compile with CONFIG_REBOOT,
add a weak stub for sys_arch_reboot which does nothing
in the POSIX arch
POSIX boards may choose to provide a more sensible implementation
if relevant.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
MISRA-C requires that all declarations of a specific function, or
object, use the same names and type qualifiers.
MISRA-C rule 8.3
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Added a new UART driver for posix arch boards.
The driver can be configured to either attach to a new
pseudo-terminal, or to connect to the invoking shell
stdin-out.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added LOG_PANIC to fault handlers to ensure that log is flush and
logger processes messages in a blocking way in fault handler.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
For native_posix:
Added command line options to control if traces should have
or not colors.
+
Detect if we are connected to a tty or not, and if we are
set the defaults for that option appropriately
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
__swap function was returning -EAGAIN in some case, though its return
value was declared as unsigned int.
This commit changes this function to return int since it can return a
negative value and its return was already been propagate as int.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Rather than do that for each architecture, source SoC Kconfigs where the
code is maintained, under ZEPHYR_BASE/soc.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Provide an implementation of gettimeofday(). This uses clock_gettime()
with the CLOCK_REALTIME parameter, which is currently unimplemented, but
will allow clients to call this function once this functionality has
been implemented.
Signed-off-by: David Brown <david.brown@linaro.org>
Move to more generic tracing hooks that can be implemented in different
ways and do not interfere with the kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
A design flaw of 'gsource' is that there's no way to require at least
one file to match the glob pattern. This could lead to silent errors.
Switch to a new design, where a plain 'source' is globbing and requires
at least one file to match. A separate 'osource' (optional source)
statement is available for cases where it's okay for a pattern (or plain
filename) to not match any files.
'orsource' combines 'osource' and 'rsource' (relative source).
This commit search-replaces 'gsource' with 'source', but backwards
compatibility with 'gsource' is still maintained by making it an alias
for 'osource' (and by making 'grsource' an alias for 'orsource').
The three Kconfig files arch/{nios2,posix,xtensa}/Kconfig source
arch/{nios2,posix,xtensa}/soc/*/Kconfig, which doesn't match any files.
Use 'osource' for those. The soc/*/Kconfig files seem to be for
additional SoC-specific symbols, only none exist yet on those ARCHes.
Also use 'osource' for the source of $ENV_VAR_BOARD_DIR/Kconfig in
boards/Kconfig, which doesn't exist for all boards.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Initially missing function prototypes warnings and undefined macro
warnings were disabled to quickly prototype the posix arch and
native_posix board.
But there is no excuse anymore to have this warnings disabled.
=> enable them.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The native_posix random driver uses random() and srandom()
whicha are old XOPEN POSIX extension (part of POSIX 2001).
To avoid compiler warnings due to the host libC headers
not including this prototypes otherwise, let's define
this 2 macros.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
A few function prototypes were missing in the native_posix
board and its drivers.
Let's add them.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Some drivers or tests need to execute some code before Zephyr is
booted, dynamically register command line arguments, etc.
For this purpose, we generalize the NATIVE_EXIT_TASK to also
provide hooks to run a function at a given point during the startup
of native_posix.
Also, test/boards/native_posix/exit_tasks is generalized to cover
this new functionality.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added 4 new pthread_key APIs for thread-specific data
key creation, deletion, setting and getting the values.
Added a key list to the posix_struct for threads.
Added pthread_once API.
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
Some of the native application components or drivers need to
do a proper cleanup before the executable exits.
So we provide a macro similar to SYS_INIT but which will be
called just before exiting.
This can be used for freeing up resources, closing descriptors,
or doing any neccessary signaling to any other host process.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Address Sanitizer helps finding issues related to memory: buffer
overflows, usage of uninitialized memory, etc. This is available in
both Clang and GCC for a while, and, since the POSIX port is only
meant for testing, this will help find issues.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Both variables were used (with the same value) interchangeably
throughout CMake files and per the discussion in GH issue,
ZEPHYR_BASE is preferred.
Also add a comment with explanation of one vs. the other.
Tested by building hello_world for several boards ensuring no errors.
Fixes#7173.
Signed-off-by: Alex Tereschenko <alext.mkrs@gmail.com>
The original implementation of CONFIG_THREAD_MONITOR would
try to leverage a thread's initial stack layout to provide
the entry function with arguments for any given thread.
This is problematic:
- Some arches do not have a initial stack layout suitable for
this
- Some arches never enabled this at all (riscv32, nios2)
- Some arches did not enable this properly
- Dropping to user mode would erase or provide incorrect
information.
Just spend a few extra bytes to store this stuff directly
in the k_thread struct and get rid of all the arch-specific
code for this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In preparation for introducing a warning.
Unquoted string defaults work through a quirk of Kconfig (undefined
symbols get their name as their string value), but look confusing. It's
done inconsistently now too.
Suggested by Kumar Gala.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add IEEE 1003.1 Posix Style file system API support.
These API's will internally use corresponding Zephyr
File System API's.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Until now, Zephyr has used a patched Kconfiglib that turns 'source' into
a globbing source (by replacing 'source' with 'gsource' at the token
level). There's two problems with this:
- The patch needs to be maintained separately
- Misspelled filenames are silently ignored, as they look like glob
patterns that don't match anything
Fix it as follows:
1. Replace all 'source' statements that use wildcards with 'gsource'
2. Remove the custom Kconfiglib patch so that 'source' no longer globs
The sed pattern '/source.*[*?]/s/source/gsource/' was run over all
Kconfig* files to do the replacement.
source's that use environment variables that might contain glob patterns
were manually changed to gsource.
Building the docs in doc/ is a good test, as doc/Makefile deliberately
sets the environment variables to glob up as many Kconfig files as
possible.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Modify the linker script with the command INSERT.
It instructs the linker to augment the default linker script
SECTIONS with the ones provided with the one provided in
this script.
It also modified the meaning of the -T switch, so it no longer
replaces the default linker script
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This patchset provides Xtensa's xcc compiler support for Xtensa
projects in Cmake. This requires the below environment variables
to be defined aptly. The appropriate xcc license information also
need to be supplied.
ZEPHYR_GCC_VARIANT=xcc
TOOLCHAIN_VER=RF-2015.3-linux
XTENSA_CORE=cavs21_LX6HiFi3_RF3_WB16
XTENSA_SYSTEM=/opt/xtensa/XtDevTools/install/tools/
RF-2015.3-linux/XtensaTools/config/
XTENSA_BUILD_PATHS=/opt/xtensa/XtDevTools/install/builds/
Change-Id: Ib3c10e8095439b0e32276ff37c00eca8420773ec
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now that other work has eliminated the two cases where we had to do a
reschedule "but yield even if we are cooperative", we can squash both
down to a single _reschedule() function which does almost exactly what
legacy _Swap() did, but wrapped as a proper scheduler API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There was a somewhat promiscuous pattern in the kernel where IPC
mechanisms would do something that might effect the current thread
choice, then check _must_switch_threads() (or occasionally
__must_switch_threads -- don't ask, the distinction is being replaced
by real English words), sometimes _is_in_isr() (but not always, even
in contexts where that looks like it would be a mistake), and then
call _Swap() if everything is OK, otherwise releasing the irq_lock().
Sometimes this was done directly, sometimes via the inverted test,
sometimes (poll, heh) by doing the test when the thread state was
modified and then needlessly passing the result up the call stack to
the point of the _Swap().
And some places were just calling _reschedule_threads(), which did all
this already.
Unify all this madness. The old _reschedule_threads() function has
split into two variants: _reschedule_yield() and
_reschedule_noyield(). The latter is the "normal" one that respects
the cooperative priority of the current thread (i.e. it won't switch
out even if there is a higher priority thread ready -- the current
thread has to pend itself first), the former is used in the handful of
places where code was doing a swap unconditionally, just to preserve
precise behavior across the refactor. I'm not at all convinced it
should exist...
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This file never existed.
'source' currently ignores missing files instead of throwing an error,
due to Zephyr's custom globbing logic.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Added a basic command line parameter parsing framework
Added the following options by now:
--stop-at=<time>: Auto-stop after <time> seconds
--seed=<seed> : random seed for entropy device
--testargs : any argument that follows is ignored in top level
and made available thru
native_get_test_cmd_line_args()
All command line parameters are still avaliable by calling
native_get_cmd_line_args(), but now you can also call
native_get_test_cmd_line_args() to get whatever was set after
--testargs
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Some of APIs of POSIX implmentation layer has same name as
native_posix architecture. posix_cheats.h is used to handle this
duplication in API name. Adding a guard in posix_cheats.h based on
CONFIG_PTHREAD_API.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
This patch provides POSIX sleep APIs for POSIX 1003.1 PSE52 standard.
sleep(n) is implemented using Zephyr k_sleep API.
uleep(n) is implemented using Zephyr k_sleep/k_busy_Wait API.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
The xtensa-asm2 work included a patch that added nano_internal.h
includes in lots of places that needed to have _Swap defined, because
it had to break a cycle and this no longer got pulled in from the arch
headers.
Unfortunately those new includes created new and more amusing cycles
elsewhere which led to breakage on other platforms.
Break out the _Swap definition (only) into a separate header and use
that instead. Cleaner. Seems not to have any more hidden gotchas.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fix Kconfig help sections and add spacing to be consistent across all
Kconfig file. In a previous run we missed a few.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This feature is X86 only and is not used or being tested. It is legacy
feature and no one can prove it actually works. Remove it until we have
proper documentation and samples and multi architecture support.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This feature is X86 only and is not used or being tested. It is legacy
feature and no one can prove it actually works. Remove it until we have
proper documentation and samples and multi architecture support.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adithya Baglody