The test errors on Arduino_101 due to
limitations in power management driver
on the platform. Hence excluding this.
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
The stack size was way too less. Increasing the size to minimum
of 512 for all platforms.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Replase magic numbers with HCI Error Code definitions in the
LE controller implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the implementation of Connection Update Procedure to
not assert when peer master violates the Bluetooth
Specification v5.0 Vol.6 Part B Section 5.3 Procedure
Collisions. Instead disconnect the link with reason
Different Transaction Collision (0x2A).
Certain phones in the market perform Connection Update
Procedure and do not correctly handle remote initiated
colliding PHY update procedures. They try to perform both
the transactions involving an instant simultaneously
violating the Bluetooth Specifications.
Implementation in Zephyr is updated to gracefully handle
the violating remote master device, and not fatally assert
in the local device.
Relates to commit 8b3fd6963c ("Bluetooth: controller: Fix
assert on different transaction collision")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When CONFIG_GPIO_SX1509B was not set, the related Kconfig options
were still showing up in .config. Let's make them depend on
GPIO_SX1509B so they can go away when not being used.
Signed-off-by: Michael Scott <mike@foundries.io>
This commit adds settings module to the peripheral_hids that makes
bonding persistent.
Now it is possible to connect with previously bonded device.
Fixes#9580
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Support using an alternate QEMU path for when we want to use a qemu
version not available in the SDK.
To use the alternate qemu version, export QEMU_BIN_PATH and point it
to the bin directory which contains the qemu executables.
For example:
export QEMU_BIN_PATH=/usr/local/bin
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Per: http://pubs.opengroup.org/onlinepubs/009695399/functions/socket.html
"Upon successful completion, socket() shall return a non-negative
integer, the socket file descriptor."
The test in prepare_fds() however fails if socket fd is
zero (non-negative), which should be a valid value.
This was found while testing the SimpleLink socket offload driver,
which can return a zero-valued socket fd, per the POSIX spec.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Commit f6bf897780 ("kconfiglib: Add preprocessor and two warnings")
accidentally made the ordering of #define's in generated header files
random (dependent on Python's set() implementation). Minimal
configuration files (which can be saved from the menuconfig) were
affected too.
The intent is for the order to match .config files, which in turn match
symbol definition order. This doesn't affect behavior in any way, but
makes things more readable (and is handier if files are checked in).
Update Kconfiglib to upstream revision a3252f620fad9 to make the
ordering match again. Tests have been added upstream.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This patch changes clock initialization sequence to initialize external
cristal oscillators only if it was not done before. Initialization of
external cristal oscillators may be performed by the bootloader.
Tested on BRD4250B evaluation board.
Fixes#9471
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Add support for OS managed Power Management framework for Zephyr
under 'subsys/power'. This framework takes care of implementing
the _sys_soc_suspend/_sys_soc_resume API's, a PM policy based on
SoC Low Power residencies and also provides necessary API's to
do devices suspend and resume.
Also add necessary changes to support the existing Application
managed Power Management framework.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
The fake exception return is used to jump to user mode.
So the init status of user thread is in exception mode.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
stack check bit of status32/sec_stat will be cleared
automically in exception entry.
so remove the redundent codes
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
CONFIG_NET_OFFLOAD was defined in Kconfig of net/ip/l2/, but actually
used by the code in net/ip/.
Fixes: #8646
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This sample application produces slightly different outputs based on
the chosen driver configuration mode. In Measuring Mode with trigger
support, the acceleration on all three axis is printed in m/s^2 at
the sampling rate (ODR). In polled Measuring Mode the instantaneous
acceleration is polled every 2 seconds. In most high-g applications,
a single (3-axis) acceleration sample at the peak of an impact event
contains sufficient information about the event, and the full
acceleration history is not required.
In this Max Peak Detect Mode the device returns only the over
threshold peak acceleration between two consecutive sample fetches or
trigger events. Instead of printing the acceleration on all three axis,
the sample application calculates the vector magnitude
(root sum squared) and displays the result in g rather than in m/s^2,
together with an bar graph.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
This patch adds support for the Analog Devices ADXL372 ultra-low power,
3-axis, +/-200 g MEMS accelerometer. The ADXL372 can be either connected
via a SPI or I2C interface.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Update yaml files to include warp7_m4 board in the platform_whitelist
for fxos8700 and fxas21002 sensors.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
This patch is to add support for the WaRP7 board which has an i.MX7
Solo SoC.
The Zephyr is running on the Cortex M4 core and the following features
were validated on this board:
* GPIO: User Switch detection and sensors interrupt
* UART: Zephyr console
* I2C: Communication with fxos8700 and fxas21002 sensors
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
In some cases the minimum time between Stop and Start was not being
considered when starting a new transfer.
This patches adds a checking on the I2C Bus Busy flag before starting
a new transaction.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
If cfg_changed has not been set consider that the application don't
care and just skip it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move to more generic tracing hooks that can be implemented in different
ways and do not interfere with the kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We will implement this as a core feature using tracing points and make
it available to any application.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove this feature specific to QMSI and available through samples only
to allow for migration to tracing hooks.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Define generic interface and hooks for tracing to replace
kernel_event_logger and existing tracing facilities with something more
common.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add osErrorTimeoutResource as return value when message
cannot be put in queue during waiting period. Also set
message value only when message is received.
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
Fix in command line parsing common functions, to prevent
a possible segfault when handling string type arguments
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
console.h references struct k_fifo for an argument, so include header
where it's defined.
Fixes: #9536
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Wayne Ren