Enable UART_QMSI_0 whenever NBLE is enabled the same way as it is done
for BLUETOOTH_H4.
Change-Id: Ib2f76f7e5e95620d40320891fec1b86509d1856e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Help text in Kconfig files should be indented with <tab><space><space>.
Change-Id: Iefa5c8f4bfe329b4ee754ebfe43766f445432184
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Provide a random driver wrapped around the MCUX TRNG driver.
Change-Id: Icbd7ab587aa18ecbd7eae52290aaa5d8ee504cf2
Origin: Original
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
MCUX contains more than one type of random number generator,
so refrect this in config and file names.
Change-Id: Iba4482a1ae41f35d471686f8b159c113147c4df8
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Fix c6e27a05 was too aggressive. It turns out that bluetooth on the
Quark SE boards won't enable it's own UART, because it had always been
enabled. Apps that don't do it already will be broken.
Enable UART_QMSI_0 whenever BLUETOOTH_H4 is pulled in on this
platform.
Change-Id: I5e21c6004714adba8fb0fafa056dc2d62698a3d1
Issue: ZEP-1788
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Cube HAL implements timeout based on 1ms tick.
This commit allows Cube HAL to get Zephyr system clock.
Change-Id: I9a59edcf6fa8e0ebfd5040348db537dadd9fcdfa
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order to support the discovery STM32F4 and STM32F429 boards,
it is necessary to make these socs available.
Change-Id: I351d294fb02c4385f291a6e258a3f7d81e85627e
Signed-off-by: Gustavo Denardin <gustavo.denardin@gmail.com>
Currently, ARM Cortex-M image ROMs are linked starting at the flash
device's base address (CONFIG_FLASH_BASE_ADDRESS). This prevents XIP
Zephyr applications from being linked to run from elsewhere on the
flash device. Linking Zephyr applications to run from elsewhere can be
necessary when running under a bootloader (i.e., booting into a Zephyr
application from a bootloader, not using Zephyr as a bootloader).
To enable this use case, add a new config option: FLASH_LOAD_OFFSET.
This option directs the linker to treat ROM as if it started that many
bytes from the base of flash on Cortex-M targets. The option defaults
to zero to preserve backwards compatibility.
Change-Id: I64f82aee257c19c2451f9789b0ab56999775b761
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
The defconfigs would always create a device for UART 0, which is
problematic in circumstances where both the x86 and ARC cores are
alive and one wants to use it in a non-default configuration.
Specifically: on Arduino 101 this is the bluetooth device and it
operates at 1MBps instead of of 115200kbps. If an x86 app sets this
up correctly, but then starts the ARC core running an app which
doesn't reference this UART at all, the device will still exist and
set up the (wrong!) configuration, clobbering the correct settings.
Just remove the "def-bool y" bits from the defconfig. There's no
need, users of these devices (e.g. the console) will enable them
anyway. There's no value to compiling it in without a configured
user.
Issue: ZEP-1677
Change-Id: I4a0e944f23705495433e9f3d0459065f131579cb
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Some files made it through review process with full license header.
Change-Id: I2722b127c40b4b19500042c12e4fde85a165bae9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently, if IRQ number != RISCV_MACHINE_TIMER_IRQ (only device IRQ in qemu),
riscv32-qemu was considering the IRQ as an exception. However, fake IRQs
can also be generated by setting corresponding bits in the Machine Interrupt
Pending register (mip). With the current implementation, these IRQs were
considered as unexpected exceptions.
To circumvent the problem, update the IRQ filtering mechanism by considering
an IRQ (IRQ number as reported by the mcause register) as an exception only
if its corresponding bit is NOT set in the mip register.
Change-Id: I4c581a84d83ee0ba2c4ea35f89ba732401eb8fa4
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
This implementation of _tsc_read returns a 64-bit value that
is derived from the 64-bit tick count multiplied by hwcycles per tick,
and then it adds the current value from the 32-bit timer.
This produces a 64-bit time. There is a bunch of math here, which
could be avoided if the CPU is built with Real-Time-Clock option.
EM Starter Kit SOCs don't have this. I don't think Arduino 101 does
either.
See ZEP-1559
Change-Id: I9f846d170246556ac40fe2f45809e457c6375d8c
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The interrupts would be placed at incorrect offsets on systems where
some interrupt vectors are reserved for exceptions, such as ARC.
Change-Id: I5b1f00eb9e8aecb84ae66e3d0461a734ffb5fbe6
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If this is set incorrectly things will break all over the place.
Needs a default defined per-arch and left alone.
Change-Id: I3f8c842937a240297ee21589a22a7a9e51dbdfad
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The wrong UART was set on for the qemu_cortex_m3 slip (uart pipe) device
Change-Id: If6d6af0f32ef02ccc559cd1fff90ea499cc378c4
Signed-off-by: Richard Peters <mail@richardpeters.de>
Added a riscv-privilege.h header file that contains common
definitions for all riscv SOCs supporting the riscv
privileged architecture specification.
This shall ease addition of future riscv SOCs supporting
the riscv privileged architecture spec.
Change-Id: I5714bf70eeda738a25967ed26d3d0d2aaa0c9989
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
When an IRQ is serviced, the ISR dispatcher will check for any new thread in
the ready queue and switch to it. However, if the current thread is marked as
non preemptable due to _kernel.current->base.preempt > _NON_PREEMPT_THRESHOLD
then we should not switch to another one.
Change-Id: Icdc08105cc6433da479bb95265710462a0f37c0b
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This core is not depreciated and compilationfor it is even faster than D_233L.
Change-Id: I6b8149ca9e879770c3ed0973ffb9304e2e3c8d8d
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
1) Fatal errors now all go through _SysFatalErrorHandler. When the
simulator is used, only the death of 'essential' threads will result
in the simulator exiting; some test cases that test exceptions may
actually expect a thread to terminate abnormally.
2) The human readability of the exception errors is improved.
Change-Id: I77f57ea0eae15b0c55237681b959cd21e3fe8c1c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The a3 register was supposed to hold the _thread pointer but it seems that it
does not in all cases. Safe to restore it from _kernel structure.
Change-Id: Ie2ff6c3faf0fe70de4c5877ab59433d0c165145b
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This change should allow threads that do not access coprocessor to safely
overflow on the coprocessor save area without any issue.
Change-Id: Ic2acd20b60b6bef0b7feeb8cfb54d548eba892f0
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This was a kind of optimization that save few cycles in the cost of code
duplication. However the path where we resume from interrupt withouch changing
the running thread is buggy and leads to many tests to fail. For now I'd prefer
to remove this optimization and have a working port. Later, once everything is
OK, I'll have time to optimize things.
Change-Id: I7af58f383848d157b9f3b3fbeceede3e83f9ce61
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
Having duplicate code leads always to this kind of situation where a bug is
fixed in one place and not in the other. This bug of updating current thread
pointer was already fixed before in the Swap function, but not in the interrupt
handler.
Change-Id: I466aea2d35382446c5c82fe775ada31f0bd19492
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
Some options which are already defined by the build system
for the C compiler or assembler have been removed: -c,
-xassembler-with-cpp, -nostdinc.
References to deleted variable flagALongCall and flagLongCall
removed.
Formatting for 80 columns, there is now one flag per line.
Change-Id: Ieecdb75e26f64c6f58dec3cc636552e7b31a678d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The retval field shall hold the return value itself not a pointer on its
location.
Change-Id: I3f9e225f2bdd501f88441946b5187ebbd17a71e3
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This was introduced during a copy/paste when updating patch
https://gerrit.zephyrproject.org/r/#/c/10323/6..7
Change-Id: Id6857dd28a16974361932285b44559f702c4d910
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This function needs to be decalred in a file included by _thread_entry.
It also needs to have exit function declared as not returning.
Change-Id: I2a01e7408cf70266351ae5089f45b5d9d009fabe
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
The function _new_thread sets the CALLINC for _thread_entry when calling the
new thread entry point. This should be CALLINC(1) (call4) instead of previous
one CALLINC(2) (call8).
This change allows resolving a crash when starting the first thread.
Change-Id: Ie97c95c87d1219342fed09f670fcae8a6230cefe
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
Andrei Emeltchenko